Lobster Tools/S-B Industries, Inc.    Fenton, MO 63026-2914
May 16, 2012 Powered by 14.4 V lithium-ion battery that will charge in less than 1 hour, Rivdom Cordless Riveter will set up to 3/16 in. standard rivets in all materials. Clear container collects spent mandrels to help keep work area clean. Featuring ergonomic, balanced design with comfortable grip handle, Rivdom has LED light that turns on when trigger is pulled, illuminating riveting application. Tool is packaged in plastic carrying case with battery, charger, and 4 sizes of nosepieces.

Metabo Corp.    West Chester, PA 19380 4243
May 15, 2012 With max drilling depth of 2 in., MAG 28 LTX is capable of 380 or 680 no load rpm and features dual-level, permanently lubricated gearbox. Rare earth magnet, without requiring any energy from tool's 25.2 V Li-Ion battery, offers up to 2,500 lb holding force that can be adjusted for precise positioning when drilling on vertical, horizontal, and sloped surfaces. Prism-shaped magnetic base lets users work on pipe as well. Tool can be used with annular cutters, spiral drills, and countersinks.

Weidmuller, Inc.    Richmond, VA 23236
May 14, 2012 Safe for working in applications up to 1,500 Vdc and 1,000 Vac in accordance with DIN EN 60900, IEC 900, SlimLine screwdrivers let users access deeply inset screws and operate spring of tension clamp terminal blocks. Protective insulation is molded directly onto screwdriver blade, ensuring electrical safety from handle to blade tip. Available with slot-head, cross-head (Phillips), or pozidrive tips, screwdrivers feature ergonomic handle with SoftFinish® zone for grip.

Walter USA, Inc.    Waukesha, WI 53188
Apr 25, 2012 Prototyp Protodyn® HSC thread former is solid carbide tool engineered to improve thread forming cutting speed, productivity, and tool life. It features micrograin carbide substrate that is mated with hard multi-layer TiCN coating that makes it suitable for use in all formable materials with an Si-content of less than 12%, such as steel, stainless steel, and aluminum. It possesses a shank tolerance h6 for use in shrink-fit chucks and its polygonal form reduces friction for increased tool life.

Esco Tool    Medfield, MA 02052
Apr 18, 2012 Esco Electric Wart MILLHOG® performs any angle of end prep and bevel, face, and bore simultaneously to produce clean, smooth, and square end preps. Designed for for applications where compressed air is not available, tool features Metalbo® 14 A electric grinder motor and gear reduction mechanism that produce variable speeds from 100-200 rpm. Portable tool is able to machine highly alloyed stainless steel pipe and tube from 3/4 in. ID to 4½ in. OD without requiring cutting oils.

Plews/Edelmann    Dixon, IL 61021
Apr 17, 2012 Plews/Lubrimatic® UltraView(TM) clear, polycarbonate shatterproof barrel grease guns allow proper identification of grease type inside gun. Lever Action version delivers 1.5 oz/40 strokes and develops 8,000 psi, while Pistol version dispenses 1 oz/40 strokes, produces 5,000 psi, and is easily operated with one hand. Both are equipped with CNC-machined, high-tolerance aluminum headcap, heavy duty follower spring, and large rolled threads for quick, clean re-loading.

Metabo Corp.    West Chester, PA 19380 4243
Mar 23, 2012 Suited for heavy-duty grinding and cutting applications, WEPBA14-125 Quick and WEPBA14-150 Quick stop wheel rotation in 2 seconds or less upon release of Deadman safety switch. Both models have 12.2 A motor and 1,400 W power rating. WEPBA14-125 Quick offers no-load speed of 10,000 rpm and max wheel diameter of 5 in., and respective values for WEPBA14-150 Quick are 9,000 rpm and 6 in. When tool is in use, ball bearings automatically offset out-of-balance conditions in grinding accessory.

Makita U.S.A., Inc.    La Mirada, CA 90638
Mar 21, 2012 Used for cutting applications involving PVC and ABS pipe, EMT, drywall, wood, and more, RJ01W kit includes 12 V max Recipro Saw, 2 recipro saw blades, ENERGY STAR® qualified battery charger, and two 12 V max Li-ion batteries. Variable-speed motor with 0-3,300 strokes/min with ½ in. length stroke accelerates cutting, while dual-position on/off switch allows for paddle switch or trigger switch operation. At 14 in. long and 2.6 lb, tool is engineered for one-handed operation.

Makita U.S.A., Inc.    La Mirada, CA 90638
Mar 21, 2012 Powered by 18 V LXT Lithium-Ion battery, Model LXWT01 features 2-pole motor that delivers top no-load speed of 1,900 rpm and 2,200 ipm with 325 lb-ft max torque. Cordless tool has 7/16 in. quick-change hex chuck, ergonomic grip, large rocker trigger switch, and single LED light to illuminate work area. Measuring 10 3/4 in. long and weighing 7.8 lb, wrench delivers speed and power needed to drill and fasten into treated wood telephone poles without rotational torque.

Platinum Tools    Camarillo, CA 93012
Mar 19, 2012 Measuring 5 x 3.25 x 1 in. and weighing 3.7 oz, BR1 Multi-Stripper (part No. 15041C) is capable of working with diverse voice, data, and video cable types/sizes. Pre-set coax cassette blades are included along with adjustable stripper for twisted pair and audio cables as well as cutters for cable and wire conductors. Tool comes standard with braid comb, Velcro, for folding braid back over cable jacket.

PennEngineering® (Penn Engineering)    Danboro, PA 18916
Mar 02, 2012 Integrating modified punch and anvil, PEMSERTER® Tooling can install PEM® Type S self-clinching nuts permanently in thin aluminum sheets without need to pre-punch mounting hole in separate operation. Raised ring on anvil allows fastener to pierce its own mounting hole and then assists in final clinching process. PEM Type S nuts with thread sizes ¼-20, 5/16-18, M6, and M8 and with -2 shank length can be installed in aluminum sheets from 0.059-0.79 in. thick and no harder than HB 79.7.

Xuron Corp.    Saco, ME 04072 1840
Mar 01, 2012 Available in left- and right-hand versions with non-slip Xuro-Rubber(TM) grips, Xuron 8500 BioShear(TM) Flush Cutter employs bypass cutting, which produces clean, square cut by using shear action. Ergonomic design helps keep user's knuckles in straight line to maintain comfort while cutting. Capable of cutting soft wire up to 18 AWG and plastics, tool is suited for electronics assembly, hobbies, and crafts.

General Development Laboratories    Morro Bay, CA 93442
Feb 10, 2012 Featuring plastic design that fits snugly on 1 gallon paint cans, Snap N Save has centered spout that eliminates wasted paint, and adaptor that enables marrying of 2 cans so paint is conserved. Lids protect paint and can from rust and debris, even when stored. Spout cap will keep paint from spilling if tipped over, and can also be used for touch-up container. For long-term storage, flat lid with no spout is also available.

Binks ITW Industrial Finishing    Glendale Heights, IL 60139
Feb 07, 2012 Available as tripod or wall mounted spray package, MX Lite 12:1 features stainless steel MX412 Pump with AA1600M Air Assisted Airless Spray Gun. Magnetic detent design creates quick stroke changeover with no pulse or surge. Self-adjusting spring loaded packings have large sight glass for visual packing inspection. Delivering soft, fine spray, HVLP or LVMP air caps optimize transfer efficiency and finish. Flat, fine, and twist tips are available in wide range of sizes.

Del City    Menomonee Falls, WI 53051
Feb 02, 2012 Flex head single and double jointed ratchets promote versatility and flexibility for end-users. Heads can flex up to 180° and feature smooth, 72-tooth design that minimizes ratchet lash while also optimizing torque. Also, there are ratchets available with telescoping handles. Twist and pull motion lets users extend handle to desired length. This feature, available in all styles except double jointed ratchet, helps limit number of ratchets required in tool box.

Binks ITW Industrial Finishing    Glendale Heights, IL 60139
Jan 27, 2012 Made with forged anodized aluminum body and thick-walled stainless steel fluid tube, 7,500 psi Airless 75 is compatible with high solids and abrasive industrial materials. Needle design keeps spring out of fluid's path, while ergonomic handle and 2-finger trigger helps minimize fatigue. With optional heat guard, unit can handle heated coatings up to 175°F. On Airless 75 Direct Connect model, fluid hose attaches directly to gun, allowing use of high solids and high viscosity materials.

Centerline (Windsor) Ltd.    Windsor, ON N9J3T8  Canada
Dec 01, 2011 With SST(TM) Series EP Cold Spray System, metal coatings can be applied at operating pressures from 100-500 psi. Material choices include aluminum and aluminum alloys, Inconel, Invar, MCrAIY, nickel and nickel alloys, stainless steel, titanium, and titanium alloys. System comes complete with portable cabinet, HMI controls, pressurized feeder, and robotic style spray gun.

Miller Fall Protection    Franklin, PA 16323
Nov 30, 2011 Meeting OSHA and CSA Z259.14-01 Type A performance requirements, Miller StopFall(TM) work positioning and fall restraint system helps linemen naturally climb wood poles with circumference from 20-60 in. Minimized adjustment points foster accelerated operation, while spring-loaded cinching feature provides effective, non-slip system that keeps unit in constant contact around pole. Protective spring cover with non-metal zipper facilitates access for component inspection and cleaning.

DeVilbiss Automotive Refinishing    Swanton, OH 43558
Nov 29, 2011 Accommodating needs of automotive aftermarket refinishing industry, FINISHLINE® 4 (FLG-4) spray gun is designed for enhanced atomization and available with multiple fluid tips. Waterborne-compatible product, which features anodized finish and steel components, delivers soft uniform spray patterns. Precision machined air caps and fluid nozzles provide consistent quality finish.

Wright Tool Co.    Barberton, OH 44203
Nov 02, 2011 Polished with chrome-plated finishes, Cougar Pro(TM) Combination Wrenches come in 11- and 14-piece SAE sets with sizes ranging from 3/8 to 1 ¼ in., as well as 11- and 18-piece metric sets with sizes from 7-24 mm. Cougar Pro Reversible-Ratcheting Combination Wrenches, featuring 72-teeth ratcheting action that turns fasteners with only 5° arc swing, come in 8-piece SAE set with sizes ranging from 5/16-¾ in. and 8-piece metric set ranging from 8-19 mm.