Nail Guns

Portable Tools

Cordless Electric Palm Nailer works in tight areas.

October 28, 2010

Weighing 3.4 lb and measuring 7.5 x 2.5 x 6.5 in., model 2458-21 can drive 16D 3 ½ in. nail in less than 2 sec and up to 100 of those same nails per charge. Impacting mechanism and M12(TM) REDLITHIUM(TM) battery technology optimize performance, offering 2.2 ft/lb blow energy and 2,700 ipm rating. In addition to all-metal gear housing, nailer features 6D-16D industrial magnetic collet that securely holds framing nails to allow one-handed use. Read More

Portable Tools

Cordless Pneumatic Nailers deliver up to 3 shots/sec.

July 14, 2010

Powered by 18 V Li-ion battery that will drive 500-600 nails/charge, Senco Fusion Tools feature reflex shot design that drives nails immediately without delay. Energy is stored as compressed nitrogen gas, and when trigger is pulled, energy is released and fastener is discharged. Angled Model FN65DA drives 1 ¼-2 ½ in. 15 gauge finish nails, while Model FN55AX drives 5/8-2 1/8 in. 18 gauge brad nails. Both offer tool-free adjustable depth-of-drive and nose-mounted LED. Read More

Portable Tools

Nail Gun Depot Now Offers Three New Tools from Porta-Nails to Tackle Your Flooring Projects with Ease

April 8, 2010

Porta-Nails expanded their line of flooring tools to now offer the 418A, Porta-Nail Pro and 461A. The diversity of each model offers the ability to install a wide range of flooring. Cincinnati, OH -- Flooring trends are changing across all markets. Due to these changes the flooring tool industry is also revolutionizing their tools. With the higher demand for exotic flooring, more specialized...Read More

Portable Tools

Coil Nailer runs 0 plastic collated coil nails.

March 9, 2010

Weighing 4.5 lb, Model DF225C can hold up to 300 CS or CI Series nails from 1½ to 2½ in. in length, and can consistently drive 2¼ in. x .099 flush into hardie-board. Tool-less 360° adjustable exhaust helps keep jobsite debris off work surface, while clear magazine allows user to view remaining nails without opening magazine. With tool-less depth of drive adjustment, countersink can be adjusted with one hand. Tool is suitable for any fencing, decking, or siding job. Read More

Fasteners & Hardware, Portable Tools

Powernail, the Leader in Hardwood Flooring Tools is Now Available at Nail Gun Depot

November 30, 2009

Powernail hardwood flooring tools and fasteners provide the speed, durability, and precision for the most demanding installers. Cincinnati, OH, November 25, 2009 -- Nail Gun Depot is always looking for new items to meet the needs of today's ever-changing marketplace. Founded in 1946, Powernail has been a leader in flooring tools for more than fifty years. Their tools are used for the...Read More

Portable Tools

Hitachi Power Tools Introduces a New Line of Flooring Nailers & Staplers

September 9, 2009

Norcross, GA, August. 21, 2009 Hitachi Power Tools today announced a new line of flooring products including two pneumatic flooring nailers and two staplers as well as a manually powered flooring nailer that does not require a compressor or hose. This line was added to serve the needs of the flooring industry, both professionally and for consumers who plan to tackle flooring installation...Read More

Portable Tools

Gas Powered 18-Gauge Finish Nailer offers cordless freedom.

August 31, 2009

Combining lithium ion battery technology and gas fuel cell, NT50GS drives fasteners from 5/8-2 in. long and has magazine capacity for 100 nails. Detachable no-mar nose cap protects delicate work surfaces from indentations/scratches, while design is optimized for balance and maneuverability to minimize operator fatigue. Additional features include quick-clear nose, with tool-less jam release, and soft elastomer handle that promotes comfort and secure grip. Read More

Portable Tools

Pneumatic Roofing Nailer operates from 60-120 psi.

August 27, 2009

Featuring single-action, side-loading nail canister, which optimizes reload speed, RN175 Roofing Nailer drives wire collated 0.12 nails from ¾ to 1¾ in. in length. Tool has Full Force Technology(TM) air chamber design, aluminum housing, wear plates on body and nail canister, and carbide inserts that protect front and bottom of nosepiece. Additional features include tool-less adjustable shingle guide, dry fire lockout, and tool-less adjustable depth of drive. Read More

Machinery & Machining Tools, Portable Tools

Bosch Expands Innovative Pneumatic Fastening Family with Debut of New Finish & Trim Tools

July 22, 2009

Nailers boast best-in-class visibility, maneuverability and performance! Mount Prospect, Ill., July 14, 2009 - Bosch Power Tools & Accessories made a stir earlier this year when the company entered the pneumatic fastening category and introduced Full Force Technology, one of the most significant innovations in the category in 30 years. This month, finish carpenters, remodelers, woodworkers,...Read More

Portable Tools

Coil Framing Nailer handles wide range of nail sizes.

February 2, 2009

Capable of driving 3 in. nail into engineered lumber, 8 lb D51855 can be used for structural framing, floor decking, roof decking, truss installation, furring strips, wall sheathing, pallet and crate manufacturing, and fencing. It handles 15° wire collated nails from 1½-3½ in. in length and .099-.131 in. dia, and depending on nail size, can hold 200-300 nails. Features include trigger lock-off, four bolt nose design, tool-free depth adjustment, and adjustable, non-slip rafter hook. Read More

Portable Tools

Framing Nailer uses offset, round head, wire weld nails.

October 22, 2008

Using nails from 2-3½ in., Model NR90AF is suited for framing, siding, decking, pallet assembly, trusses, and sheathing. Tool-less depth of drive allows for flush fastening of various materials, while hardened claw tip minimizes wear on nose and slippage when driving at angle. Rear loading magazine holds up to 100 nails, and when tool is empty or if nail count runs low, dryfire lockout mechanism prevents nailer from firing without fastener. Read More

Fasteners & Hardware, Machinery & Machining Tools, Portable Tools

Compact Gas Finish Nailers are lightweight and maneuverable.

August 1, 2008

Including 3 models each with capacity of 100 nails, gas finish nailers combine lithium ion battery technology and gas fuel cell to hold fasteners up to 2½ in. in length. Model NT65GS applies 16 ga fasteners from straight magazine, while angled 15 ga NT65GA and angled 16 ga NT65GB allow for easy maneuverability in tight corners and spaces. Units feature double actioned nail feed and reciprocating piston system to drive intermittent cycle rate of 2 nails/sec and 1,000 nails/hr. Read More

Portable Tools

Finish Nailers drive 1-2 1/2 in. nails into hardwood.

July 15, 2008

Suited for woodworkers and carpenters, 15 gauge Model D51276K and 16 gauge Model D51257K are designed with Sealed Lube Dual Tech(TM) feature, which allows for oil-free or oil-lube operation. Internal piston catch provides consistent drive on each shot, while tool-free jam clear helps remove bent nails, and 360° exhaust cap channels air and dust away from user. Tool-free depth adjustment lets user quickly set depth for proper nail countersink. At 3.85 lb, both nailers minimize user fatigue. Read More

Portable Tools

Nailer drives up to 2 in. 18 ga nails into hardwood.

October 17, 2007

Powered by XRP(TM) 18 V battery pack, Model DC608K 18 ga XRP(TM) brad nailer is equipped with 110 nail capacity box-style magazine which helps keep sawdust and debris out. Unit drives nails with lengths from 5/8-2 in. and features sequential operating and bump operating modes. Tool-free jam clear system and 12-position depth adjustment system are included in 11½ x 3½ x 11 in., 7.4 lb nailer, which has overhang of 1.5 in. and reversible metal belt hook. Read More

Fasteners & Hardware, Portable Tools

Pneumatic Fastening Tools are designed for heavy-duty use.

January 30, 2006

Professional Pneumatic Fastening Tool Line is made up of 6 models of nailer and one Narrow Crown Stapler. Features include magnesium housings, tool-free depth-of-drive adjustments, selectable triggers, self-cleaning air filters, adjustable exhausts, ergonomically designed rubber over-molded handle and trigger, and internal piston catch for prevention of misfires. Read More

Portable Tools

Framing Nailer suits extended use or overhead applications.

January 12, 2006

Weighing 7.5 lb, 3.5 in. round head Model NR90AE features Selective Actuation, which allows user to switch from sequential to contact fire with flip of switch. It includes rubber grip, tool-less depth of drive dial, high carbon steel toenail, and 2-piece rear loading aluminum magazine. Tool operates from 0.49-.83 psi and accommodates sixty-four 0.131 in. nails. Read More

Portable Tools

Nailer addresses metal connector use in construction.

January 2, 2006

Designed for tight spaces and hard-to-reach areas, MCN150 metal connector nailer measures less than 10.5 in. tall and weighs 4.8 lb. Over-molded grip minimizes slippage, and in-line magazine fits into 90° angled corners for maneuverability. Unit accepts 1½ in. paper tape collated nails ranging from .131-.148 in. dia, and precision trip mechanism promotes exact placement of nails into metal connector holes. Tool also features tool-free 360° adjustable exhaust. Read More

Portable Tools

Coil Framing Nailer has 1,050 in.-lb driving force.

December 19, 2005

Featuring magnesium housing, Model N89C-1 weighs 8.1 lb and countersinks 2-3½ in. long framing nails with 0.099-0.148 in. shank diameter into high-density building materials. Smart Trigger works in bump-fire mode if pulled before nose is depressed, and drives nails individually if nose is depressed before pulling it, minimizing double-fire effect. Second trigger works in sequential fire mode. Nailer also offers push button drive depth mechanism and 360° adjustable exhaust. Read More

Portable Tools

Coil Sheathing Nailer produces 630 in.-lb of force.

December 14, 2005

Featuring magnesium housing, Model N75C-1 weighs 4.9 lb and includes tool-free depth adjustment positioned in front of trigger. With magazine capacity up to 300 nails, tool accepts wire-weld coil and plastic inserted nails ranging from 1½-3 in. in length with shank diameter of .092-.131 in. It features mildly aggressive serrated tip to avoid damage to sensitive materials, removable non-marring nosepiece, steel wear guards, and 360° adjustable exhaust. Read More

Portable Tools

Pin Nailer suits detailed woodworking applications.

December 14, 2005

With pin capacity of ½-1 3/16 in. and over 60 lb-in. power, 23-gauge Model HP118K can countersink pin nails into hardwoods, including oak and maple. It includes high/low power control for setting pin nails at desired depth without changing compressor settings. Side-load magazine houses up to 200 pins and adjusts to different fastener lengths automatically. Featuring aluminum body, tool weighs 2.3 lb and measures 7.81 x 9.06 in., enabling use in tight spaces. Read More