Cobar Solder Products
Londonderry, NH 03053
Jul 15, 2005 Constructed of polypropylene, refillable Flux Pen features fine tip that allows user to apply liquid flux to tiny chip components and individual solder joints on densely populated assemblies. Flux is dispensed by squeezing barrel, and transparent cartridge shows amount of remaining material. Design minimizes waste and prevents over-fluxing, which reduces cleaning time and prevents contamination. Ergonomic pen fits into top pocket of lab coat.

Gamma Scientific
San Diego, CA 92123 1876
Jun 14, 2005 Stripemaster II is a 30 m geometry retroreflectometer suited for measuring pavement markings on dry and wet surfaces. Housed in aluminum case, unit incorporates internal printer and capacity to store up to 10,000 data points. At push of button, wheel-mounted unit delivers individual data point, global position, and timestamp simultaneously. User can print hardcopy or export data via RS-232 communications into traffic inventory system or standard computer.

Almetek Industries, Inc.
Hackettstown, NJ 07840 9600
Apr 25, 2005 Made from heavy gauge stainless steel, 3-D Embossed Storm Drain Markers offer deep stamped serial numbers and custom engraving options. Four inch diameter disks can be engraved with City, Town, State, or GPS locations and are designed for EPA Storm Water Phase I and II programs to help inform public of environmental concerns. Units are available in natural or painted background colors, in 9 different symbols, and 10 legends.

Borries Marking Systems
Ann Arbor, MI 48108 1623
Mar 29, 2005 Able to be hand held or integrated into machine, Model 313 Micro Liner is programmed by controller that provides data input via PC, barcode scanner, PLC, or integrated key pad. Unit provides multi-line marking area of 4.74 x .75 in., and utilizes changeable devices to inscribe broad range of part geometries. Applications include metal and aluminum supports, pipes, and tubes.

Unitek Miyachi Corporation
Monrovia, CA 91017 7133
Mar 24, 2005 Model LMV1000G diode-pumped, solid-state laser marker features 532 nm wavelength output and is suited for high-speed precision marking applications. Employing Nd:YV04 lasing medium, it can produce machine- and human-readable marks on gold-plated electronic components without removing any gold. Product is capable of producing line widths down to 20 microns, characters down to 100 microns, and data matrix codes with 20-micron cell sizes.

PTG Industries
Lake Mary, FL 32746
Jan 11, 2005 FiberTower(TM) Fiber Laser Marking System is comprised of independent components, which include Q-Switched Fiber Laser (up to 200 W), scan head, PCI control board, and power supply. Using FiberScan graphical-based laser programming software, users can create graphics, logos, 2D matrices, barcodes, symbols, and text in any production environment. Machine operates from 110 Vac power source and features air-cooling and wall-plug efficiencies up to 20%.

ID Technology Corp.
Fort Worth, TX 76106
Jan 10, 2005 Suited for installation in complicated production lines and environments, MACSA Series F-1000 Laser Systems incorporate compact design and adjustable marking head. Systems clearly and permanently mark labels, cardboard, PET, glass, and wood. Software enables users to link multiple F-1000 systems for increased control and production.

Spectrum Technologies PLC
Bridgend CF31 3RT  United Kingdom
Nov 26, 2004 Capris 50-100 processes single core wires and multicore cables with mark, measure, and cut capabilities. Data is input via membrane keypad, and wire changes require no alteration to wire transport or marking system. Able to mark single characters, print flexibility allows up to 30 characters per identification code in horizontal and vertical print formats. System employs solid-state laser technology and handles wires from 26–4 AWG.

Borries Marking Systems
Ann Arbor, MI 48108 1623
Jul 14, 2004 Diode-pumped laser marker, with Class 1 safety features, is suited for marking metal and plastic parts and tags. All components are mounted in air-conditioned, 3-compartment cabinet. Power hook-up is 120 V/60 Hz. Low-noise vacuum cleaner keeps marking area clean from gas and dust. Available with RS232 and Ethernet interface, product includes software that provides visualization of data, machine status, and process sequence.

Midwest Tool & Cutlery Co.
Sturgis, MI 49091
May 17, 2004 Made of drop forged 8630 tool steel, Scratch Awl Marker is 3.5 in. in length tapering to sharp point. It is heat-treated with finely polished finish. Design allows sheet metal workers and other tradesmen to use awl for hole punching by striking on handle-less striking end.

Universal Laser Systems, Inc.
Scottsdale, AZ 85260
Apr 15, 2004 Professional and XL Series Laser Systems offers High Powered Density Focusing Opticsâ„¢ to engrave small text, produce high-resolution graphics and photographs, and vector mark and cut thin lines. Users can scribe or etch directly on some uncoated metals, such as stainless steel, without use of marking compounds.

Unitek Miyachi Corporation
Monrovia, CA 91017 7133
Mar 31, 2004 Diode-pumped Model LMV1000 employs YVO₄ crystal lasing medium and can pump laser through end of crystal rather than from side. High power density results in line widths down to 20 microns, character sizes to 100 microns, and data matrix codes with 20 micron cell sizes. Model LMV1000 is suited for marking small parts in electronics and medical industries.

Diversified Brands, A Sherwin-Williams Business Group
Solon, OH 44139
Mar 05, 2004 Tri-Flow® Pin Point Lubricator Pen contains concentrated formula with petroleum oils, micron-sized Teflon® particles, and pressure additives that secure Teflon for lasting lubrication. Suited for preventative and corrective maintenance, pen deposits film to reduce friction and wear, inhibit rust formation and corrosive buildup, and displace moisture, dirt, and contaminants. Coating resists dust, sand, salt spray, and other abrasive elements.

Weber Marking Systems, Inc.
Arlington Heights, IL 60005 4457
Jan 29, 2004 SolarJet HD marks products and packages found in wet, dusty, environments. Permanent text, bar codes, and graphics as small as 0.020 in. high can be marked on substrates like paper, cardboard, foils, coated metals, plastics, wood, and glass. The 50 W, CO₂ laser can mark up to 1,000 characters/sec at product delivery speeds up to 1,060 fpm. Five lenses allows marking fields from 2.0–7.8 sq in. Unit integrates with sealed, SS controller mounted on floor stand.

JMD Mfg., Inc.
Framingham, MA 01701
Jan 28, 2004 Shapex self-inking batch coders/stampers are available with hand batch coders/stampers for specific applications, interchangeable characters for customized messages, and fast drying inks. Product line includes: Bottomex Batch Coder, Capex Batch Coder, Curvex Batch Coder, Cupex Batch Coder, and Bottlex Batch Coder.

Columbia Marking Tools, Inc.
Chesterfield, MI 48047
Dec 22, 2003 Handy Andy(TM) pneumatic, fully-programmable, bench-top marker can apply serial numbering, date codes, job numbers, lot numbers, and logos. PC software works with Windows® 95/98/2000/NT4/XP and provides pull-down menus, icons, hot keys, and text orientation control. Two-axis stepper motor connected to PC by serial interface connection controls marking stylus. Pneumatic dot peen force is 14.5 psi max, which allows for marking fragile parts.

Columbia Marking Tools, Inc.
Chesterfield, MI 48047
Jul 29, 2003 Double-acting, air-operated Slide-A-Mark models 651 and 851 utilize same cylinder body and bolt-mounting pattern and are offered with various keyed air-powered rod and stamp holder styles. Model 651 produces force range of ¼-6 tons, while Model 851 produces force range of 1½-12 tons. Markers utilize 2-stage impact marking sequence and fixed internal air passages that control speed. Strokes range from 2½-12 in., and marking pressure remains same anywhere within stroke.

Kitzel, E.C., & Sons
Cleveland, OH 44135-2677
Jul 25, 2003 Suited for 2D, pin, and peen marking systems, DiaMarkâ„¢ diamond-tipped stylus is available in all diameters and lengths for any marking machine, and provides 100 times the service life of carbide tools. Standard diameters are up to 5/8 in. and standard lengths are up to 6 in. Applications include aerospace and defense, automotive, and medical industries, or anywhere permanent marking is utilized.

LA-CO Industries, Inc.
Elk Grove Village, IL 60007
Jul 25, 2003 With broad tip nib measuring more than ½ in., Markal® PRO-MAXâ„¢ paint marker uses Xylene-free formula to produce heavy, weather-resistant lines that dry in minutes. Odor-free product has Valve Action® construction and is capable of permanently marking most surfaces in temperatures from 0 to 150 °F. Marker is offered in 6 bright colors with self-storing cap. Applications include raw material and shipping/receiving identification.

MECCO Marking Systems, M.E. Cunningham, MECCO Machine Ltd. Divisions
Ingomar, PA 15127
Apr 03, 2003 Adjustable pocket for hand holder allows user to increase pocket size for various marking requirements. Hand style M-E-Conomy Holder uses multiple width starter and ender spacers pinned into position for 7 pocket openings ranging from 1/2 x 1/4 in. to 1/2 x 3 in. Standard slotted type is retained with spring-pin retainer. Press and sledge style options are available for high-volume operation.