Irwin Industrial Tool    Huntersville, NC 28078
May 14, 2013 Impact Performance Series™ fastener drive bits, available in Phillips®, square recess, Torx®, and tamper-resistant Torx® bits, are manufactured with cold-forged steel. Designed to drive fastener from side, nutsetters have lobular design that optimizes clearance on corners of fastener. Insert bit holders feature c-ring design with external clip that fits into retaining ring notch of insert bit, while socket adapters are available with ball-lock retention design and have forged body.

Lowell Corp.    West Boylston, MA 01583
Apr 24, 2013 Model 8C features 4 sockets that can handle 4 nut sizes commonly found in utility and construction work. While 1 ¼ x 1 1/16 in. hex socket serves tasks such as tightening heavy hex ¾ and 5/8 in. M.J. bolts on clamps and tapping sleeves, 1 1/8 x 15/16 in. hex socket can tighten nuts on standard hex ¾ and 5/8 in. flange bolts and equipment. Ergonomic grip and weight of 2.5 lb reduce fatigue during use, and solid metal sockets firmly grip nuts. For turning power, wrench is rated at 200 lb-ft.

Symmetry Medical Inc    Warsaw, IN 46580
Mar 13, 2013 Compatible with all legacy Bookwalter Retractor System components, Bookwalter Self-Retaining Rotilt Ratchet combines locking tilt, locking rotation, and self-retraction in single tool. Low-profile device closely mimics natural toe-in motion of handheld retractors while retaining benefits of table-mounted ring retractors.

Lowell Corp.    West Boylston, MA 01583
Feb 21, 2013 With extended sockets, 511X Ratchet Socket Wrench Kit helps users tighten difficult-to-reach nuts. Design helps reduce risk of injury as well as increase leverage and swing width. Kit features Model 51QR ratchet handle and 5 hexagonal deep well sockets – 7/8, 15/16, 1 1/16, 1 1/8, and 1 ¼ in. – that are all 3 ½ in. long. While Bolt-Thru design lets bolts pass entirely through arm head so nuts can be secured on any threaded length, quick release feature accelerates socket changes.

Columbus McKinnon Corp.    Amherst, NY 14228
Jan 15, 2013 Designed to fit all trailers and all standard landing gear, Sixth Wheel Ratchet enables truck operators to use ergonomically correct posture, utilizing body weight while minimizing muscle exertion to reduce risk of injuries. Made from hardened steel, self-locking security pin and cap can only be removed by using heavy-duty shop equipment.

Klein Tools, Inc.    Lincolnshire, IL 60069
Dec 13, 2012 Extra-Wide Jaw 8 in. Adjustable Wrench (Cat No D509-8) offers full 1 ½ in. jaw capacity, same as standard 12 in. adjustable wrench, and is designed with minimally protruding jaw shank. At 8 in. long tool facilitates access to nuts and bolts in confined spaces and comes with standard and metric measurement scales. Handle width promotes user comfort, while 4-threaded knurl worm gear helps balance wrench for smooth operation and maximizes applied force.

Lowell Corp.    West Boylston, MA 01583
Aug 31, 2012 Intended for utility, construction, and maintenance workers who need to tighten nuts on transmission towers, 100T Series Triple Square Transmission Tower Wrenches provide 3-in-1 functionality to enhance operational flexibility. Each wrench uses proprietary ratchet technology and has 3 square sizes in 1 permanent socket to handle common nut sizes in tower fasteners. Bolt-Thru design of wrench head and socket facilitates tightening nuts on bolts of any threaded length.

Lowell Corp.    West Boylston, MA 01583
Jun 08, 2012 Cast malleable iron 40 Series wrenches are available up to 48 in. long with square, hex, or round/keyed openings up to 4 ½ in. Features include reversing controls in head; enclosed, replaceable gears; and bolt-thru design that facilitates nut tightening. Accommodating hex and square sockets that can be changed out via removable retaining ring, 50 Series socket wrenches feature ratchet handles up to 64 in. long, socket openings up to 9 in., in-head reversing control, and bolt-thru design.

Aven, Inc.    Ann Arbor, MI 48108
Mar 14, 2012 Made of 400 series stainless steel, Adjustable Wrenches come in 6, 8, 10, and 12 in. sizes, with or without PVC grips. Units lock into position when user applies pressure, assuring knurls will not loosen and jaws will not slip. Hardened steel can be autoclaved and tolerates caustic cleaning solutions. Minimizing ferrous contamination risk, tools are suitable for maintenance in health care, food processing, pharmaceutical labs, marine applications, and chemical production.

Del City    Menomonee Falls, WI 53051
Feb 02, 2012 Flex head single and double jointed ratchets promote versatility and flexibility for end-users. Heads can flex up to 180° and feature smooth, 72-tooth design that minimizes ratchet lash while also optimizing torque. Also, there are ratchets available with telescoping handles. Twist and pull motion lets users extend handle to desired length. This feature, available in all styles except double jointed ratchet, helps limit number of ratchets required in tool box.

Lowell Corp.    West Boylston, MA 01583
Nov 02, 2011 Using Model 101XRS, utility workers can open pentagon security nuts and adjust ¾ in. hexagon tie-down nuts used on pad mount transformers. Tool features one-piece design that incorporates gear, shaft, and sockets. Ratchet mechanism reverses with flick of lever, while 32 teeth minimize throw angle, making tool suitable for working in tight areas. Featuring 7 in. handle length with cushion grip, wrench has been tested to 90 lb-ft.

Wright Tool Co.    Barberton, OH 44203
Nov 02, 2011 Polished with chrome-plated finishes, Cougar Pro(TM) Combination Wrenches come in 11- and 14-piece SAE sets with sizes ranging from 3/8 to 1 ¼ in., as well as 11- and 18-piece metric sets with sizes from 7-24 mm. Cougar Pro Reversible-Ratcheting Combination Wrenches, featuring 72-teeth ratcheting action that turns fasteners with only 5° arc swing, come in 8-piece SAE set with sizes ranging from 5/16-¾ in. and 8-piece metric set ranging from 8-19 mm.

Wright Tool Co.    Barberton, OH 44203
Sep 27, 2011 Offered in metric sizes from 7-24 mm, Wright Tool open-end and combination wrenches are available with WrightGrip(TM) high-strength, anti-slip design. This feature ensures wrench fits snugly on fastener, preventing jaws from spreading and tool from slipping. Series of strategically placed teeth or grooves on insides of wrench's 2 jaws promote precision seating of wrench on fastener, while slight enlargement of wrench opening's back end helps stiffen wrench jaws.

Lowell Corp.    West Boylston, MA 01583
Feb 21, 2011 Used to drive screw mechanism of ratchet-type outside lineup pipe welding clamps, ratchet arms facilitate and increase precision of pipe welding in oil/gas pipeline construction/maintenance. With ½-1 1/8 in. gear openings and 300 lb-ft torque, fabricated handle Models 104 and 105, respectively, measure 16 and 19 in. and weigh 2¾ and 3 lb. For heavier jobs, cast iron Models 16 and 17 deliver up to 400 lb-ft torque. Tools are 16 and 19 in. long and weigh 4¾ and 5½ lb, respectively.

Aven, Inc.    Ann Arbor, MI 48108
Dec 17, 2010 Available in 6 sizes with overall lengths of 5-8 in., Grade 420 Stainless Steel Combination Wrenches are corrosion-resistant and can be autoclaved up to 250°F. Tools have open end angled at 15° and 12-point box end for hexagonal or square nuts. Provided individually or as 6-piece set in roll-up pouch, wrenches help assure aseptic environments in critical areas for industrial, scientific, and health care users. Sizes include 5/16, 3/8, 7/16, 1/2, 9/16, and 5/8 in.

Black & Decker U.S., Inc.    Towson, MD 21286
Oct 07, 2010 Made of forged steel with black oxide finish, Ratcheting ReadyWrench® combines 16 standard and metric socket sizes from 5/16-¾ in. (8-19 mm) in one hand tool. SureFit(TM) Technology promotes grip, while short-pin design lets tool slide over nuts tightened down on long bolts. Color-coded socket sizes foster visibility and selector ring facilitates direction changes when ratcheting. Applications range form DIY projects to automotive work.

Ideal Industries, Inc.    Sycamore, IL 60178
Sep 27, 2010 Designed for electricians, 21-n-1 Twist-a-Nut(TM) has 4 most frequently used bits pre-loaded into driver shaft. Additional 12 bits are securely stored for quick access within handle. Dual interchangeable chrome-vanadium shafts are designed for driving ¼, 5/16, and 7/16 in. nuts, and handle also has 2 Accu-Loop(TM) wire looping holes along with Wire-Nut® ratcheting wrench formed into its bottom. Tool is built around all-metal, 28-tooth ratcheting mechanism that delivers 225 lb torque.

Channellock, Inc.    Meadville, PA 16335-0519
Aug 10, 2010 Intended for tradesmen and do-it-yourselfers, 4-in-1 Ratcheting Wrench Set does work of 8 combination wrenches or sockets with 2 tools. Both wrenches have 4 different sizes built into each. While 12-point sockets maximize points of contact, one-handed operation facilitates and accelerates tightening/loosening of nuts and bolts. All wrenches are heat-treated and have electronic coating for rust prevention. Set is available in metric and SAE measurements.

Count On Tools    Gainesville, GA 30501
Jul 19, 2010 PB Swiss Tools' Holding Ring Hex Keys allow fasteners to be inserted or removed in hard-to-reach locations, without fastener falling off tool or sacrificing strength. Hex key L-wrenches for hexagonal socket screws (mm) are equipped with holding ring on ball end, and inlaid circlip spring ring holds screws firmly onto tool. Inlaid design of holding ring eliminates wear concerns while allowing movement at up to 30° angle when tightening/loosening screw over full 360° rotation.

Wright Tool Co.    Barberton, OH 44203
Jun 10, 2010 WrightGrip SB ratchet features a ½ in. drive, 7/8 in. open-head ratchet, replaceable hammer on other side of ratchet, and 7/8 in. open-end wrench on end of handle. Ratchet is interchangeable with 2 in. deep socket for final tightening on smaller scaffold diameters, and hammer inserts are available in brass or steel. Lanyard ring allows tool to be tied to scaffold builder, and it slides up and down the handle to keep lanyard out of the way while user works with tool.