Hitachi Power Tools
Norcross, GA 30093
Oct 03, 2005 Measuring 5 11/16 in. high, 3 lb SV13YA random orbit finishing sander employs 230 W, 2.0 A motor that operates at speeds from 7,000-12,000 rpm. Ball bearing construction and sealed switch protect sander from dust, while ergonomic palm grip minimizes vibration and prevents slippage. Unit has hook and loop pad system for attaching sanding paper and comes with integrated dust collection bag. Product is also offered in single-speed version, SV13YB.

KWH Mirka Ltd
Espoo FIN-02630  Finland
Mar 17, 2005 Abranetâ„¢ Deco Sander performs dust-free finishing on walls and ceilings, helping to maintain clean work environment. System is made up of telescopic sanding tool that uses proprietary abrasive material coupled with industrial-type vacuum cleaner. Suction of vacuum can be adjusted to allow unit to stick firmly to ceiling. Material has thousands of holes across surface that facilitate dust extraction, helping to avoid atmospheric contamination.

Bosch Power Tools & Accessories
Mt. Prospect, IL 60056
Feb 10, 2005 Series 1800 incorporates vibration absorbing rings in 3-position, side-assist handle and between main trigger handle and motor housing. Seven inch Models 1873-8 and 1873-6 feature 3 hp motor and operate at 8,500 rpm and 6,000 rpm, respectively. Models 1893-6 and 1894-6 are 9-in. grinders operating at 6,000 rpm with 3 hp and 4.5 hp motors, respectively. Models 1853-5 and 1853-6 are 7 and 9 in. large angle sanders operating at 5,000 and 6,000 rpm respectively.

Allway Tools, Inc.
Bronx, NY 10462
Jun 09, 2004 Made of structural foam with stainless steel clips, Hand Sander is primarily used for drywall sanding. Handle is over-molded with soft, Santoprene rubber, allowing all-day use without discomfort. Sander is also suited for polishing, scrubbing, and deglossing of wall and floor surfaces, cabinets, furniture, woodwork, and boats.

Bosch Power Tools & Accessories
Mt. Prospect, IL 60056
May 20, 2004 Model 1297DK ¼-sheet palm-grip finishing sander kit includes SheetLoc(TM) Sandpaper Attachment System, which pulls regular sandpaper flat and tight for uniform sanding. Using through-the-pad dust collection, Microfilter(TM) canister provides up to 75% collection efficiency and captures particles as small as ½ micron in diameter. Kit also includes low-vibration, 3-point, internal counter-balance system; ergonomic soft-grip top; and all ball-bearing construction.

RIDGID
Elyria, OH 44035
Oct 23, 2003 Model R2610, 6 in. sander offers 1/8 in. setting for fine finish work and 1/4 in. setting for aggressive material removal. Features include auto-stop motor brushes, Micro Fiber(TM) hook and loop sanding pad, and on-board vacuum adaptor. Electronic speed control from 4,000-10,000 rpm provides unit with feedback to maintain speed under any load. Integrated pad brake prevents gouging of work piece during accidental startups.

RIDGID
Elyria, OH 44035
Oct 23, 2003 Model R2600 5 in. Random Orbit Sander features electronic speed control ranging from 7,000-12,000 rpm, which provides feedback to maintain constant speed under any load. Soft start/pad brake system prevents surface damage on start-up and shut down. Micro Fiber(TM) hook and loop pad feature eliminates dust build-up. Sander includes 12 ft rubber power cord, which stays flexible in cold weather, and lighted plug, which confirms tool is live.

RIDGID
Elyria, OH 44035
Oct 23, 2003 Model EB4424 Oscillating Edge/Belt Spindle Sander features adjustable 0-48° tilting table with detents at 0, 15, 22.5, 30, and 45°. By removing Sof-Touch(TM) knob, user can convert from belt sander to spindle sander without tools. Powerful, 3/8 hp, 5.0 A motor features permanently lubricated sleeve bearing. Combined oscillating and rotary motions provide fast material removal and smooth finishes. Sander includes 4 x 24 in. sanding belt, drums, and set of sleeves.

RIDGID
Elyria, OH 44035
Oct 21, 2003 Model R2500 operates on 2.4 A motor, which provides quiet power source with little vibration. Oversized, quick release tabs secure standard paper onto sander. Dust collection is provided by active through-the-pad collection and screw on dust bag. Dust-sealed slide switch allows user to verify if tool is on or off, preventing accidental start-up. Sander includes 12 ft flexible rubber power cord, lighted plug, and Velcro(TM) cord wrap.

Metabo Corp.
West Chester, PA 19380 4243
Oct 08, 2003 Offered with rubber-coated top that deadens vibration, model Sr356, 1/3 sheet sander also incorporates 2-position side handle for operator control. Unit has no protruding parts and die-cast aluminum base plate. Sandpaper clamping system incorporates rubberized pressure pads for gripping and tensioning of sanding sheet, while auxiliary fan provides for self-contained dust collection or external vacuum hose connection.

Chicago Pneumatic Co.
Rock Hill, SC 29730-7463
Aug 08, 2003 Series SX palm-type, random orbital sanders offer 3/32 in. orbit diameter for fine finishes and 3/16 in. diameter for general finishing. Lubrication-free pneumatic motor generates 0.3 hp with variable speed range from 0–12,000 rpm. Oversized, dual ball bearing sets are double sealed for long life. Two interchangeable grips are provided to suit operator hand size. Lock-off lever prevents accidental starts. Pad diameters include 3.5, 5, and 6 in.

Palmgren Steel Products
Chicago, IL 60617
Apr 08, 2003 Belt-disc sanders for sanding, finishing, polishing, and deburring on metal, plastic, and wood have capacitor motors that supply extra current at start up and when running under load. Models feature belt housing that rotates from vertical to horizontal positions for sanding long pieces. One model is dual speed sander for stock removal on cast iron or other metals. Disc sizes range from 6–12 in. with belt sizes that range from 2 x 42 in. to 6 x 48 in.

T.C. Service Co.
Willoughby, OH 44094
Oct 17, 2002 TOP CAT® Model 520VK vertical grinder/sander is available in versions that include 7 or 9 in. configurations for both Type 27 or Type 28 grinding wheels; and 4, 5, or 7 in. sizes for sanding discs. Wheel guard version includes drive flange wrench, while sanding pad version comes with sanding disc mounting nut and wrench. Tool has 1,500 W, 2 hp motor with rated speeds of 6,000–12,000 rpm. All versions include comfort-grip handles to protect hands and handle isolators.

Metabo Corp.
West Chester, PA 19380 4243
Sep 23, 2002 Model Lf724 strips paint, varnish, and other coatings on flat wood surfaces. S-automatic clutch reduces damage to gear train when planer hits nail on siding or wood. Tool has 4 reversible solid tungsten carbide blades and creates minimal dust during use. Blade cutting diameter is 3 1/7 in. and max rabetting height is 1 1/0 in. Cutting depths are .012 in. axil and .006 in. radial. No-load speed is 11,000 rpm with torque of 18 lbs-in.

Kalamazoo Industries, Inc.
Kalamazoo, MI 49001
Sep 06, 2002 With its 20 in. disc, Model DS20 sander operates at 1740 rpm. It offers tilt table with miter gauge and reversing switch. Two motors are available: 2 hp, 3 phase or 1½ hp, 1 phase.

Kalamazoo Industries, Inc.
Kalamazoo, MI 49001
Apr 29, 2002 Model S613v is equipped with 6 x 48 in. belt and 12 in. solid aluminum disc. Belt side of sander features 6 x 10 in. worktable with 1/2 x 1/8 in. slot, 6 1/2 x 14 in. steel platen, and belt speed of 2800 fpm. Disc side features 8 x 14 in. cast iron worktable and disc speed of 2500 fpm. Sander is powered by 3 hp TEFC motor, and can be supplied with or without enclosed stand and built-in 100 cfm dust collector.

Milwaukee Electric Tool Corp.
Brookfield, WI 53005 2550
Mar 26, 2002 Lightweight Models 6080-20 and 6081-20 7 and 9 in. sanders, respectively, Model 6088-20 7 in. grinder, and Models 6086-20 and 6089-20 9 in. grinders all have 4 hp, 15 A motors. For operator comfort and safety, they have angled rear handles and side handles, 2-finger trigger switches, 3-position side handles and spindle locks. Applications include metal fabricators, welders, steel erectors, pipeliners and masonry contractors.

Dynabrade, Inc.
Clarence, NY 14031 1490
Feb 13, 2002 Dynorbital-Spirit 12,000 rpm, air-powered, random orbital sander has low profile housing, and comes in vacuum and non-vacuum models. It is available in 3, 3-1/2, 5 and 6 in. dia models, with 3 sanding orbit diameters: 3/8 in. dia orbit for aggressive sanding; 3/16 in. for general sanding; and 3/32 in. dia for ultra-fine sanding. It works on wood, metal, composites, solid surface, plastic, and fiberglass.