RIDGID
Elyria, OH 44035
Oct 11, 2006 Conforming to ASTM F 1807 black copper crimp ring specifications, RIDGID® Compact Series Pressing Jaws are available for crimping PEX and multi-layer tubing for radiant heat and potable water applications. Jaw ID clips, constructed of glass-filled nylon and marked with system and size information, facilitate identification of correct pressing jaw. Available in 6 sizes from 3/8-1¼ in., products are designed for use with RIDGID Compact 100-B battery press tool.

FCI/Burndy Products
Manchester, NH 03108
Sep 14, 2006 Model PAT750XT-18V battery-actuated hydraulic crimping tool provides consistent connection on up to 750 kcmil copper and aluminum terminals and splices. Features include crimping head design that offers 360° rotation, high-speed hydraulic pump, 12-tons of output force, and audible pop-off crimp indicator. Operating on 2.6 AH high-capacity 18V Ni-MH battery, tool is suitable for contractor, utility, and telecommunications markets.

Schleuniger, Inc.
Manchester, NH 03103
Aug 30, 2006 Featuring 20-job memory for all stripping parameters and functions, StripCrimp 200 performs precision stripping and crimping of side or rear-feed terminals for 30-12 AWG wires. It accepts mini-style applicators and delivers up to 3.7 tons of crimping force. All stripping parameters and special functions are programmable through multilingual operating panel. Along with quick-change base plate, machine features adjustable crimp height, speed controls, and cycle time under 0.9 sec.

RIDGID
Elyria, OH 44035
Aug 16, 2006 Designed to produce crimp without marks and distortion of crimped rings, RIDGID® manual PEX Crimp Tools are suitable for crimping PEX and multi-layer tubing for radiant heat and potable water applications. Ergonomically designed E3(TM) handles are constructed of glass-filled polycarbonate, and enable users to crimp with minimal effort. Designed to conform to ASTM F 1807 copper crimp ring specifications, tools come in 3/8, ½, 5/8, ¾, and 1 in. sizes, as well as ½-¾ in. combination size.

Waytek Inc.
Chanhassen, MN 55317
Jul 27, 2006 Weather-pack die set, usable with Mobile Crimp Tool Frame, crimps full range of wire sizes 12-20 gauge. Snap-in device can handle insulator and conductor crimps at the same time without need for separate tools.

Thomas & Betts Corp.
Memphis, TN 38125
Jul 24, 2006 Suited for making connections in corrosive or high-moisture environments, Sta-Kon® Heat-Shrink Terminal Kit includes ring terminals and butt splices, as well as ratchet crimp tool, wire stripper, and butane torch. Terminals and splices are self-insulated with heat-shrinkable, cross-linked polyolefin and internally coated sealant. Terminals feature brazed seams to prevent separation of terminal during crimping and internal serrations for increased pullout resistance.

Greenlee Textron, Inc.
Rockford, IL 61109
Jun 20, 2006 Models EK121D and CK121D feature flip open indentor crimping head capable of crimping wide range of lugs and splices. Tools are UL and cUL Classified for 8 brands of aluminum color-coded code connectors from 6 AWG to 1,000 kcmil and for 8 brands of copper-coded code connectors from 4 AWG to 1,000 kcmil. Resulting crimps show single indentation marked with Greenlee logo for future identification of tool that made crimp. Corded and battery powered versions are available.

RIDGID
Elyria, OH 44035
Apr 11, 2006 Made of high carbon, heat-treated steel, RIDGID® electrical hand tools line comprises 10 models for cutting, stripping, and crimping stranded copper, copper, coaxial, and fiber optic cables. Tools feature RIDG-BACK(TM) cutting blade, return-spring, and cushion-grip handles for operator comfort. Paint-filled tool graphics provide quick and long-lasting identification of all tool functions, and application markings are indicated on tool handle.

Thomas & Betts Corp.
Memphis, TN 38125
Mar 31, 2006 Available in standard and self-contained models, Color-Keyed® Battpac® Battery-Powered 6-Ton Crimping Tools accept Color-Keyed CRCTBP1 Smart Batteries. Both tools feature 10,000 psi of operating pressure and crimp connectors from 8 AWG to 600 MCM in copper and 10 AWG to 400 MCM in aluminum (H-taps to 4/0). Both use T&B® Fittings 6-Ton dies and Blackburn® O and D dies as well as other manufacturers' crimp dies. Cutting head cuts cable up to 750 kcmil.

Thomas & Betts Corp.
Memphis, TN 38125
Mar 31, 2006 Color-Keyed® 14-Ton Hydraulic Crimping and Cutting Tools, available in manual and battery-powered models, protect operator hands and are suited for use in tight spaces. Tools provide 14.6 tons of terminal crimping and cable cutting force. In addition to dual-speed action pump, crimp tools use Color-Keyed® 15500 series crimp dies. Manual and batter-operated tools crimp up to 900 and 750 kcmil copper as well as 750 and 600 kcmil aluminum connectors, respectively.

FCI/Burndy Products
Manchester, NH 03108
Mar 20, 2006 Delivering 6 tons of crimping force, Y81KFT 4-POINT(TM) dieless HYPRESS(TM) incorporates latchless flip-top style head that facilitates tool removal from continuous conductor runs. Unit weighs 12 lb and has ergonomically sound design for termination and splicing. Suited for use on copper, aluminum, compressed, compact, stranded, solid, and flex conductors, product comes with molded, high-impact plastic case. Head rotates 360° relative to handles and is mated to rapid advance pump.

FCI/Burndy Products
Manchester, NH 03108
Mar 15, 2006 PAT81KFT-18V 4-POINT(TM) battery-powered hydraulic crimping tool incorporates dieless latch head design eliminating need to purchase and maintain dies. Featuring 360° head rotation, it is designed for use in any position. Allowing for one-hand operation, tool features audible pressure "pop-off" valve and die embossment. Product is suited for use on copper, aluminum, compressed, compact, stranded, solid, and flex conductors.

Weidmuller, Inc.
Richmond, VA 23236
Aug 04, 2005 Designed for preparing wire ends, stripax® plus 2.5 works with wire cross sections from 20–14 AWG. Complying with DIN 46228 P4 requirements, crimping ferrules are stored in tool and inserted automatically in strips of 50. Crimping cylinder can be positioned using adjusting wheel, which audibly snaps into place, preventing errors in positioning and protecting tool from damage. Tensioning clamp features closed lug to prevent spring from becoming detached.

Anderson Power Products
Sterling, MA 01564
Jan 21, 2005 Compact, heavy-duty crimping tools 1370 and 1387G3 use interchangeable, hexagonal die sets from 6 AWG through 4/0 and 10 through 95 mm² that can be changed in seconds. Powered by 3 A-hr Ni-Mh battery, 1370 incorporates hand guard for operator safety. Model 1387G3 hand tool has integral molded handles for operator comfort. Both tools come with molded carrying case, which is compartmentalized for tool and crimping dies.

FCI/Burndy Products
Manchester, NH 03108
Nov 23, 2004 Remote-operated, hydraulic LPHY46 KOMPRESSORâ„¢ features 2 in. jaw opening, 15 ton output force, and 350° head rotation that allows for operation in any position. Double acting for hydraulic ram advance and retract, product features ergonomic handle and spring back-up for ram retraction in case of hydraulic pressure loss. It can be powered from open or closed center hydraulic tool circuits or from portable, 1,500–2,500 psi hydraulic power packs.

Anderson Power Products
Sterling, MA 01564
Jul 30, 2004 Model PM1000GI features 12-position, dial type locator that accommodates 18 different PowerMod and Power Drawer contacts. Integrated 4-indent die includes dial selector with appropriate settings for 24–12 AWG wires. Product also comes equipped with carrying case and tooling required for die and locator maintenance.

FCI/Burndy Products
Manchester, NH 03108
May 25, 2004 PATRIOTâ„¢ PAT600-18V incorporates high-speed pump, transmission, and piston design. Latch style head provides 180° rotation and allows interference free closure on tap connections, while audible pop-off valve signals completion of crimp. Coupled with variable speed trigger, unit holds position when trigger is released. Tool provides 6 ton crimping force, has crimp speed of less than 4 sec, and performs 160–200+ crimps per charge.

Ideal Industries, Inc.
Sycamore, IL 60178
Mar 12, 2004 Smart-Gripâ„¢ electrician's tools include 9¼ in. side-cutting linesman pliers with optional crimp, 8 in. diagonal pliers with optional angled head, 7¾ and 8½ in. needle-nose pliers, 9½ and 10 in. tongue-and-groove pliers, cable cutter, and multi-crimp tool. Pliers are rated for cutting screws, nails, hardened wire, and ACSR. All tools have textured, dual-durometer Santoprene® handle and feature dropforged carbon-steel construction and induction-hardened cutting edges.

Conta-Clip
Hillsborough, NJ 08844
Jan 28, 2004 Ferrule Crimpers are available in pneumatic, handheld, tabletop, and hand-operated models. Supplied fully assembled and ready for hookup to compressed air supply, pneumatic crimpers produce trapezoidal crimp cross section, ensuring optimum mechanical and electrical connection between ferrule and conductor. Manufactured to exacting specifications, hand-operated ferrule crimpers are available with front or side wire entry, and with one or individual crimp cavities.

FCI/Burndy Products
Manchester, NH 03108
Dec 05, 2003 KOMPRESSORâ„¢ LPHY750 remote-operated, 12-ton crimping tool is double acting for hydraulic ram advance and retract. It includes spring back-up for ram retraction in case of hydraulic pressure loss. Tool has 1.65 in. jaw opening with 350° head rotation. It can be powered directly from open or closed center hydraulic tool circuits, which are present on most utility trucks, or from individual, 1,500-2,500 psi hydraulic units.