A & E Hand Tools / A & E Inc.
Racine, WI 53401
Jul 16, 2008 With fine tooth ratcheting feature, 9-Piece Wrench Set No. 5333 allows positioning of wrench-driving end for tensioner access from any angle, and direct access to tensioners without removing engine accessories or frame components. Set includes 8 interchangeable adapters that allow service to most serpentine belt applications including GM, Ford, Dodge, Toyota, Saturn, and Volkswagen.

A & E Hand Tools / A & E Inc.
Racine, WI 53401
Jul 16, 2008 Designed to adjust tie rods on vehicles with rack-and-pinion steering, Tie Rod Wrench No. 615 works on most spline, hex, and two flat design tie rods. Spring-loaded upper jaw pivots to accommodate tie rods ranging in size from 10-18 mm and is self-adjusting. Cam action increases gripping pressure as load applied to handle increases.

A & E Hand Tools / A & E Inc.
Racine, WI 53401
Jul 16, 2008 Used for rotation of crankshaft and to check engine timing and parts clearance, 6-Spline Crankshaft Wrench No. 9270 is custom designed for 2007 Harley-Davidson Sportster and 2008 Buell 6-spline engines, while 24-Spline Crankshaft Wrench No. 9280 is suited for 2006 Dyna 24-spline engines. Reversible ratcheting wrenches are heat-treated and chrome-plated and come complete with E-Z Grip handles to optimize turning power while minimizing hand fatigue.

DeWalt Industrial Tool Co.
Hampstead, MD 21074
Jul 15, 2008 Suited for woodworkers and carpenters, 15 gauge Model D51276K and 16 gauge Model D51257K are designed with Sealed Lube Dual Tech(TM) feature, which allows for oil-free or oil-lube operation. Internal piston catch provides consistent drive on each shot, while tool-free jam clear helps remove bent nails, and 360° exhaust cap channels air and dust away from user. Tool-free depth adjustment lets user quickly set depth for proper nail countersink. At 3.85 lb, both nailers minimize user fatigue.

Greenlee Textron, Inc.
Rockford, IL 61109
Jul 09, 2008 Offering 400 lb-ft torque, Fairmont H8508-1/1V/2/2V turn at up to 6,500 rpm and drill holes through hardened treated wood poles in seconds. Moderate-speed H8508-3/3V offer 280 lb-ft max torque and deliver optimal control. While ½ in. square drive is standard on select models, 7/16 in. hex quick change chuck on others facilitates and accelerates switch from drilling to driving. All models incorporate twin-hammer impact mechanism, Super Spool(TM) selector, and forward/reverse button.

ASG, Div. of Jergens, Inc.
Cleveland, OH 44110
Jun 25, 2008 Featuring ergonomic design that provides operator comfort and gripping power, direct drive Torq2(TM) HDP Series is appropriate for soft draw applications, such as wood screws, self-tapping screws, or trim screws. Sculpted thermoplastic elastomer housings help deliver balanced, non-fatigue performance, while quick-change collet facilitates bit changing.

Lowell Corp.
West Boylston, MA 01583
Jun 19, 2008 Model 151 Double Shot dedicated ratchet wrench and 151T socket ratchet wrench are available with 1½ in. fat grip that makes using tools more comfortable and secure while reducing worker fatigue. Bolt-thru design of both models lets bolts pass entirely through socket so nuts can be secured on any threaded length. Featuring fluorescent orange sockets to optimize tool visibility, ratchets feature reversing control located in head and are semi-enclosed to minimize fouling.

Del City
Milwaukee, WI 53209
May 30, 2008 Featuring ergonomic, cushioned handles, line of Circuit Alert(TM) Tools includes screwdrivers, wire strippers, pliers, flashlights, and utility knives, all with built-in removable voltage detector that produces audio and visual alert when it detects live circuit. Tools are made of forged steel for light weight, and many are multifunctional for completing variety of tasks.

Acument(TM) Global Technologies North America
Sterling Heights, MI 48314
May 30, 2008 Torx Plus® Maxx concentrates highest available levels of torque directly to studs, ball studs, and threaded fasteners. Studs feature drive lobes that extend into threaded portion of fastener point, and full engagement between drive socket and assembly tool spreads surface contact. Established fastening angle enables stems to achieve up to 95% of blind hole torque before failure. Tool can also hold threaded parts, studs, and ball studs stationery while nut is torqued to proper setting.

Hitachi Power Tools
Norcross, GA 30093
May 23, 2008 Model N5010A stapler fires ½ in. standard-crown 16 ga staples ¾-2 in. in lenghth. Using 15/16 in. wide-crown 16 ga staples from 5/8-2 in. long, N5021A also features dial for adjusting drive depth. Both devices weigh less than 5 lb and include nose with tool-less release for extraction; top-load, stainless steel plated plastic magazine with open design for monitoring staple quantity; and elastomer grip. Cylinder valve firing mechanism drives up to 13 staples/sec.

ASG, Div. of Jergens, Inc.
Cleveland, OH 44110
May 22, 2008 Available with torque ranges from 22-115 lbf-in, Torq2(TM) HPS Series pistol grip drivers are suited for soft draw applications such as wood screws, self-tapping screws, or trim screws. Operator controls torque of positive clutch tool by varying pressure applied to driver, and ergonomic design lends to operator comfort and gripping power. While sculpted thermoplastic elastomer housings promote balanced, non-fatigue performance, quick change collet facilitates bit changing.

Klein Tools, Inc.
Lincolnshire, IL 60069
May 20, 2008 Comprising of 7 screwdrivers and 5- or 7-piece set (Cat. Nos. JSDS01 and JSDS02), Journeyman(TM) line of screwdrivers have hard steel blade machined with precision ground tip for exact fit into fastener. They feature tri-lobe handle for generating maximum amount of turning power. Tools come in various tip styles including 3/16 in. cabinet (Cat. Nos. JSD4C06 and JSD6C06), ¼ and 5/16 in. keystone (Cat. Nos. JSD4K08 and JSD6K09), and Nos. 1-3 Phillips (Cat. Nos. JSD4PH1, JSD4PH2, and JSD6PH3).

Emhart Teknologies, A Black & Decker Co.
Shelton, CT 06484
May 19, 2008 Delivering 4,148 lb pulling power with force-to-weight ratio of 990 lbf/lb, POP® ProSet® 3400 Rivet Tool can set all 4-, 5-, 6-, and 8-size rivets, including high-strength and SS. Features include quick-disconnect nose housing and jaw case, as well as quick-disconnect MCS cup that safely captures spent mandrels for disposal. Weighing 4.41 lb, tool can set 1/8-¼ in. dia rivets, has stroke of 1.02 in., and consumes 2.83 ft³ of air per rivet set.

Lowell Corp.
West Boylston, MA 01583
May 15, 2008 Featuring model 51QR ratchet handle and 5 x 3½ in. long deep well sockets, 511X Wrench Kit is designed for applications in plant maintenance, repair, operation, and production as well as construction and pipeline work. Bolt-Thru design allows bolts to pass entirely through arm head and product includes quick release feature. Sockets are made of machined steel while handle is made of cast iron. Hexagonal sockets of 7/8, 15/16, 1 1/16, 1 1/8, and 1¼ in. are included.

Bondhus Corp.
Monticello, MN 55362 9347
Apr 30, 2008 Available in standard and insulated versions, Ergonic® screwdrivers feature handles that conform to user's hand to promote comfort during use. Handle also serves to optimize torque transmission capability. Each screwdriver blade is machined to exacting German standards.

Aven, Inc.
Ann Arbor, MI 48108
Apr 28, 2008 Targeting telecom and electronics technicians, Model 10140 Crimping Tool for Micro Connections is capable of crimping 1.25-2.5 mm narrow pitch connector pin wires, and handles D-Sub connector contacts from variety of manufacturers. Pliers are made of S55C with Teflon coating, and feature oil-resistant elastomer handles, locking latch, and coiled spring. Measuring 6.8 in. long, tool allows for fatigue-free work.

Weidmuller, Inc.
Richmond, VA 23236
Apr 18, 2008 Measuring 250 mm in length, Weidmuller crimper features hard/hard handle combination that withstands exposure to oils and lubricants. Leverage system ensures that fingers are not inadvertently squeezed together, decreasing hand fatigue. Made from hardened steel, crimper is equipped with integrated ratchet that allows it to open only when crimping process is fully completed. Tool meets requirements for hand crimping tools per DIN 41 641 Part 1.

Waytek Inc.
Chanhassen, MN 55317
Apr 10, 2008 Supplied with Mobile Crimp Tool Kit, crimp tool frame facilitates exchange of snap-in dies and eliminates need for buying multiple tools. Seven snap-in dies work on variety of applications including insulated, non-insulated, heat shrink, and Weather Pack terminals and splices. All dies come standard with interlocking holder and are pinned together so that pieces do not get lost.

TorcUp
Easton, PA 18040
Apr 07, 2008 Available in 5 sizes, Raptor Torque Wrench accommodates torque needs from 120-6,000 lb-ft. It features sealed housing and ergonomic grip, ensuring comfort of operator and safe operation. Patented gear technology minimizes operational temperatures, while custom-designed motor is specifically intended to withstand heavy industrial use.

Metabo Corp.
West Chester, PA 19380 4243
Apr 04, 2008 Model SE2800 is suited for contractors whose jobs entail hand-held tool use for extended period of time. Weighing 2.64 lb with tool length of 9½ in., it includes heavy-duty forward and reverse running motor with up to 106 in.-lb of tightening torque suitable for driving up to #8 tek screws into metal or up to #14 wood screws. Compact and light weight unit features 2-piece depth stop, joist hanger, and onboard Variospeed electronics that offer no-load speeds of up to 2,850 rpm.