Machinery & Machining Tools, Portable Tools

Makita Releases the Next Generation 12V Max Lithium-Ion

April 28, 2016

New 12V max CXT™ is more compact with more comfort and capacity La Mirada, Calif. – Makita, a pioneer in cordless technology, has released the next generation of 12 volt with the 12V max CXT™ Lithium-Ion cordless tool series. Makita 12V max CXT™ features slide-style batteries so each tool’s handle is built with ergonomics in mind – not around the stem of a battery – for improved... Read More

Portable Tools

Cordless Impact Tools deliver optimized torque values.

March 22, 2016

Offering electronic 3-speed power selection, 18 V LXT® Brushless Cordless Impact Tools include XWT07M/Z ¾ in. square drive impact wrench, XWT08M/Z ½ in. square drive impact wrench, and XWT09T/Z 7/16 in. hex chuck impact drill. While XWT07M/Z delivers 780 lb-ft fastening torque and 1,250 lb-ft breakaway torque, respective values for XWT08M/Z are 740 lb-ft and 1,180 lb-ft. Both impact wrenches feature Star Protection Computer Controls™. Model XWT09T/Z delivers 590 lb-ft drilling torque. Read More

Portable Tools

Portable Magnetic Drill has coolant bottle package.

February 10, 2016

Suited for repetitive hole drilling, HMD904 is offered with package that ensures adequate levels of coolant are continuously delivered to tool's cutting edge. Drill also incorporates LED indicator with circuitry that monitors critical magnet lift/shift sensor and switch, changing from green to red if unsafe condition exists. Powered by 7.2 A, 450 rpm motor, tool uses 12,000-Series Rotabroach® Annular Cutters for burr-free holes up to 1½ in. dia and 2 in. deep. Read More

Machinery & Machining Tools, Portable Tools

Magnetic Drilling Units are designed for heavy-duty applications.

September 15, 2015

Equipped with ACCUDRILL pressure indicator and material and thickness detector, ICECUT 100 (850 W, 600 rpm) and ICECUT 200 (300 and 600 rpm) promote safe and reliable use. ACCUDRILL safety amp meter in central control panel lets users optimize drilling operation productivity while preventing motor from overloading/overheating. Also included, material and thickness detector will not let drill start when magnetic holding power is insufficient to secure unit to work piece and operate safely. Read More

Machinery & Machining Tools, Portable Tools

Portable Magnetic Drill features automatic feed mechanism.

August 7, 2015

Suitable for production applications, MAB 825 V incorporates automatic feed mechanism with power retraction; double-insulated, 16 A, reversible motor with 4-speed oil bath gearbox; infinitely variable torque control; and full-wave electronics. Heavy-duty drill cuts holes up to 4 in. dia. in structural steel and other metals. Additional capabilities include twist drilling and reaming up to 1 ¼ in. dia, tapping up to 1 1/8 in. dia, and countersinking up to 2 in. Magnet holding force is 6,600 lb. Read More

Machinery & Machining Tools, Portable Tools

Portable Magnetic Drill facilitates positioning via swivel base.

April 6, 2015

When attached to workpiece with 8,000 lb holding force magnet, MAB 525 SB provides 20° movement left and right and 5/8 in. forward and backward. Hole cutting capacity is up to 2 ½ in. dia in structural steel and other metals, and other capabilities include twist drilling up to 1 in. dia, tapping up to 15/16 in. dia, reaming up to 7/8 in. dia, and countersinking up to 2 in. Double-insulated, 14.5 A, reversible motor has 2-speed (70–280 rpm and 180–580 rpm) oil bath gearbox. Read More

Machinery & Machining Tools, Portable Tools

Portable Magnetic Drill features multi-axis positioning.

October 23, 2014

Used for job site drilling, boring, and slotting applications, MAB 800 KTS features infinitely variable torque control, servo-assisted drilling, 10 in. stroke, and full-wave electronics. Multi-axis positioning capability lets drill be adjusted up to 2 5/32 in. forward/backward and up to 4 ¾ in. left/right after magnet adheres to surface. In addition to cutting holes up to 2 3/8” dia, capabilities include twist drilling up to 1 in. dia. and tapping up to 1 1/8 in. dia. Read More

Portable Tools

Portable Magnetic Drill can be converted to standard drill press.

September 8, 2014

Featuring 8.2 A motor and no-load speed of 450 rpm, MABasic 200 drills up to 1¼ in. dia, 5¾ in. depth with annular cutters in structural steel and other metals. This heavy-duty, single-speed, 14¼ in. tall, 27 lb tool accepts cutters with ¾ in. Weldon Shank. With optional chuck, product converts to standard drill press with 6 1/3 in. stroke for conventional twist drilling up to ½ in. dia. Other features include internal lubrication system and Electronic Safety Shutoff Sensor. Read More

Construction Equipment & Supplies, Portable Tools

Portable, Trailer-Mounted Drill Rig is designed for shale.

May 12, 2014

Drilling rig T250XD provides 250,000 lb hook load using Telemast® technology and is equipped with LoadSafe XD fully-automated, hands-free pipe handling system. Rig is used for top-hole drilling and features top drive travel, operator's control room, and ability to interface with remote operating centers via satellite or Internet. Read More

Portable Tools

Versatile Portable Magnetic Drill with Reverse for Hole Cutting up to 2-1/2" Dia. and Tapping up to 15/16" Dia.

April 23, 2014

CS Unitec's MAB 525 portable magnetic drill has a hole cutting capacity up to 2-1/2" dia. in structural steel and other metals. The 14.5 amp, double-insulated, reversible motor has a 2-speed oil bath gearbox (70-280 and 180-580 RPM) ideal for annular cutters and twist drills. Additional capabilities include twist drilling up to 1" dia., tapping up to 15/16" dia., reaming up to 7/8" dia. and... Read More

Portable Tools

Panasonic Expands Its Lineup of "Tough IP" Cordless Power Tools with Two New Models

October 10, 2013

New Li-Ion cordless power tools debuts at ASSEMBLY Show 2013 NEWARK, N.J. -- Panasonic will announce the introduction of two new Li-Ion cordless power tools to its Tough IP(TM) professional-grade product offering at the ASSEMBLY Show 2013. Featuring dust and water resistant technology, the power tools have received an IP56 under international standards administered by the International... Read More

Fasteners & Hardware, Machinery & Machining Tools, Mechanical Power Transmission, Portable Tools

Disc Springs Application: Heavy Duty Right Angle Drill

May 7, 2013

DEWALT, a subsidiary of Stanley Black and Decker, is a brand with a reputation for providing high quality professional power tools, contractor tools and accessories. DEWALT's lead design engineer for drills was tasked with designing a high power right angle drill that is lightweight, compact, and portable. As is common with hand power tools, the goal with the design was to maximize performance... Read More

Electrical Equipment & Systems, Machinery & Machining Tools, Portable Tools

Panasonic Showcases New Dual Voltage Technology for Tough IP(TM) Power Tools at IBS 2013

January 25, 2013

Panasonic Booth Number: C6638<4444>LAS VEGAS - Panasonic Power Tool Division, a pioneer in cordless power tool technology, showcases the expansion of their line of Tough IP(TM) Li-Ion Cordless Power Tools at the2013 International Builders' Show. The Tough IP line now features products with new Dual Voltage Technology, allowing select tools to be used as both 18-volt and 14.4-volt with just a... Read More

Portable Tools

Cordless Drill/Driver features attachment to increase torque.

November 20, 2012

Powered by Ultra-M 4.0 Ah battery, BS18 LTX Quick has dual range torque adjustment with max running torque of 372 lb-in. and up to 850 lb-in. for momentary spikes. Cordless tool offers no-load speed of 0&ndash;400 rpm in first gear and 0&ndash;1,400 rpm in second gear. When paired with Power X3 torque attachment, torque is tripled and speed is reduced to 0&ndash;133 rpm for maximum control and power. Quick change chuck system allows operator to change from drill to driver mode or install Power X3 in seconds. Read More

Machinery & Machining Tools, Portable Tools

Diamond Coring Bit is built to serve geo-technical applications.

November 14, 2012

Offering range of ground formations, GTUMX&trade; supports drilling speeds and penetration rates required for shallow holes and conventional drilling in both exploration and geo-technical applications. UMX metallurgical formula, impregnated with large synthetic diamonds, optimizes penetration and bit life, while Razorcut&trade; design on face of bit accelerates exposure of diamonds. Width of tapered waterways improves surface flushing and cutting while reducing wear on inner-diameter of bit. Read More

Machinery & Machining Tools, Portable Tools

Makita Expands Growing Line-Up of 18v LXT Brushless

June 8, 2012

New LXDT08 and LXPH05 are also available in new LXT239 2-Pc. Combo Kit <4444>La Mirada, Calif. - Makita, a worldwide manufacturer of technologically advanced power tools that are more compact with less weight yet deliver industrial strength power and results, has expanded its line-up of 18V Lithium-Ion Brushless Motor tools with the new 18V LXT Brushless Impact Driver (LXDT08) and 18V LXT... Read More

Portable Tools

Cordless Driver-Drill weighs less than 4 lb.

June 21, 2011

Powered by 4-pole motor, Model LXFD0118V LXT Lithium-Ion Cordless ½ in. Driver-Drill delivers 480 lb-in. max torque and 290 lb-in. PTI torque. Unit has 16 clutch settings and 2-speed all-metal transmission for no-load speeds of 0-400 rpm on Low and 0-1,500 rpm on High. Charging on ENERGY STAR®-qualified Rapid Optimum Charger, Lithium-Ion battery reaches full charge in 30 minutes. Tool's soft grip optimizes comfort, and built-in LED light illuminates drilling surface. Read More

Machinery & Machining Tools, Portable Tools

Diamond Coring Bits help optimize drilling productivity.

March 9, 2011

Impregnating large synthetic diamonds within metallurgical formula, Ultramatrix(TM) Coring Bits create crown matrix that maximizes bit life and penetration capabilities. Razorcut(TM) face design optimizes tracking and balance in hole, while advanced Stage(TM) waterway design allows crown heights up to 25 mm. Twin-Taper(TM) windows optimize surface flushing, forcing debris through windows while keeping bit face clear and reinforcing inner diameter. Read More

Portable Tools

Cordless Right Angle Drill Driver has electronic clutch.

February 22, 2011

As 18 V tool with adjustable clutch, M18(TM) model 2615-20 provides 11 torque settings and one drill mode for complete control in close-quarter fastening applications. Extended paddle switch design aids trigger actuation from top, middle, or bottom of tool, while 3/8 in., one-handed, keyless ratcheting chuck facilitates and accelerates bit changes. Tool produces up to 125 lb-in. torque, operated from 0-1,500 rpm, and is powered by REDLITHIUM(TM) technology. Read More

Machinery & Machining Tools, Portable Tools, Green & Clean

Cordless ½ in. Driver-Drill utilizes 18 V Lithium-Ion power.

December 8, 2010

Weighing 3.3 lb, 7 9/16 in. long model LXFD01CW is powered by 2-piece, 4-pole motor that delivers 480 lb-in. max torque and 290 lb-in. PTI torque. Planetary gear system and transmission optimizes durability, while 16 clutch settings and all-metal, 2-speed (0-400/1,500 rpm) transmission cover range of drilling and driving applications. Along with ½ in. steel and 1½ in. wood capacities, tool offers 15 min charge time, ergonomic design with rubberized soft grip, and LED work light. Read More