Hougen Mfg. Inc.
Flint, MI 48501 2005
Oct 06, 2004 Models HMD904, HMD150, and 10914 feature LED indicator with circuitry that monitors critical magnet lift detector. LED provides instantaneous alert to operator, switching color from green to red if unsafe condition exists involving sensor. Drills also feature 2-stage power-on switch that prevents spindle rotation unless electro-magnet has been energized. In case of power interruption, relay circuitry requires motor to be manually restarted by operator.

Hitachi Power Tools
Norcross, GA 30093
Aug 31, 2004 Rated 18 V, Model DS18DMR delivers 550 lb-in. torque and comes with two 3.0 Ah batteries. Using two 2.0 Ah batteries, 14 V Model DS14DMR produces 450 lb-in. torque. Both feature 2-speed transmissions with no-load rpms of 0-400/1,600. Drills include rare earth magnet motors, replaceable armatures, externally accessible carbon brushes, industrial-grade Rohm chucks, 22-stage ratcheting slip-clutch, and 5-position belt hook with integrated LED work light.

Metabo Corp.
West Chester, PA 19380 4243
Jun 25, 2004 With torque ranges from 265–575 lb-in., SBP 18 Plus provides drill setting for rotation only as well as hammer drill setting for rotation with impact. Product runs on 18 V battery and features 2-speed gearbox, 5 torque settings, and Variospeed technology. Impuls system lets user drive screws as well as drill in metal and ceramic without center punching. With 1/2 in. keyless chuck, drill provides 22,400 bpm and no-load speeds of 0–400 and 0–1,400 rpm.

Metabo Corp.
West Chester, PA 19380 4243
May 27, 2004 Able to drill into wood, aluminum, and steel, BSP 18 Plus operates from 18 V battery at no-load speeds of 0–400 and 0–1,400 rpm in first and second gears respectively. Motor enables product to drill holes up to 2 in. dia in wood and ½ in. dia in steel. Features include 2-speed gearbox, 20 torque settings, ½ in. keyless chuck, and Variospeed technology. Impuls system lets users drive screws and drill in metals and ceramics without center punching.

Metabo Corp.
West Chester, PA 19380 4243
Dec 10, 2003 Suited for drilling, tapping, and driving screws, 12 V, variable speed BSP12 incorporates motor that generates low heat and optimal power. Impulse technology enables bit to find point of resistance and helps prevent drill bit from walking. Features include die cast aluminum gear housing, quick-release keyless chuck, and spindle stop system. It also offers forward/reverse feature, no-load speeds of 0–400/0–1,400 rpm, and max torque of 178/194/484 lb-in.

Metabo Corp.
West Chester, PA 19380 4243
Nov 10, 2003 Model BE710 incorporates 2-speed gearbox along with Variospeed full wave electronic speed control, which enables infinite variation in speed. Reversing feature provides full torque in reverse, while S-automatic safety clutch restricts reverse torque in case of bit jam. Features include winding protection grid, die cast aluminum housing, and auto-stop carbon brushes. Max tightening torque is 142 lb-in., and drilling capacity is ½ to 1 9/16 in.

Milwaukee Electric Tool Corp.
Brookfield, WI 53005 2550
Oct 29, 2003 Compact Series of 12 and 14.4 V Cordless Driver/Drills employ Clip-Lokâ„¢ System and feature single-sleeve, ratcheting chuck; 2-speed motor that operates from 0–400/0–1,400 rpm and produces 390 lb-in. torque (14.4 V model); and 20-position clutch. Suited for drilling and fastening, 12 V unit has 3/8 in. capacity chuck, while 14.4 V unit has ½ in. capacity chuck. Reversible battery may be positioned to suit working environment or to optimize balance.

Ridge Tool Co.
Elyria, OH 44036
Oct 23, 2003 Available in 12, 14.4, and 18 V models, 3/8 in. drills include 2 NiCad battery packs; die-cast, 24-position clutch ring; and self-ejecting battery pack feature. Products deliver torque from 350–460 lb-in. depending on model. Both 14.4 and 18 V models have 360° auxiliary handle for increased control and comfort. Tools also offer single-sleeve locking chuck, slide-stop pads, grip overmold, and 3-piece housing. No-load speeds range from 0–380/0–1,300 rpm to 0–450/0–1,500 rpm.

Ridge Tool Co.
Elyria, OH 44036
Oct 23, 2003 Available in 12, 14.4, and 18 V models, X2 series ½ in. cordless drills are equipped with 2-speed transmission for rates of 400/1,600 rpm or 450/1,600 rpm. With max torque levels from 365–485 lb-in., drills have auxiliary handles for increased control and handling. They come with 2 Max HCâ„¢ high capacity battery packs, 24-position clutch, and single-sleeve locking chuck with carbide jaws and auto spindle lock.

Ridge Tool Co.
Elyria, OH 44036
Oct 21, 2003 Model R7100 Heavy Duty ½ in. Drill features hardened steel gears and 9 A motor that handles operation in dusty, abusive jobsites. Auto-stop brushes halt drill's operation when brushes are worn, before they damage motor. Automatic safety clutch protects user from kickback if bit accidentally jams. Two variable speeds, 0–1,000/0–3,000 rpm, permit screw driving and drilling. Model R7100 includes lock-on button and 12 ft cord with lighted plug.

Metabo Corp.
West Chester, PA 19380 4243
Aug 08, 2003 Housed in ergonomic package, BE1020 provides 248 lb-in. torque and incorporates 2-speed gearbox, S-automatic safety clutch, and winding protection grid. It also features electronic carbon brush wear indicator and Vario-Tacho-Constimatic full-wave electronic speed control. Drilling capacity is 5/8 in. (steel) and 1 9/16 in. (softwood). Utilizing 8.2 A motor, product has no-load speeds rated at 0–900/0–2,600 rpm and rated input of 1020 W.

Millmate
Harahan, LA 70123-4132
Aug 06, 2003 Equipped with No. 2 Morse taper, Tap Aligning Center has spring center used to align taps when hand tapping in lathes or drilling machines. Suited for awkward tapping operations, product does not require user to constantly adjust center. Physical characteristics include hardened 5/16 in. dia center, 1 in. plunger travel, and overall length of approximately 5½ in.

Niko Trade Ltd - U.S.A., Inc.
Fairfield, NJ 07004
Jul 01, 2003 Fleximills countersink and chamfer any angle between 10–80°. Tools are supplied with 2 types of insert pockets: one for square insert (SCMT 421) and one for triangle insert (TCMT 321). Made from tool steel with nitrogen superficial treatment, tools have hardness of 60 HRC, are blacked by PVD coating, and polished for added rigidity and accuracy. Products are offered in 2 sizes: 330W-.750 (.750 shank) and 340W-1.00 (1 in. shank).

Hougen Mfg. Inc.
Flint, MI 48501 2005
Mar 20, 2003 Portable HMD150 incorporates quick-change arbor design with bayonet-style twist and lock tool mounting. Able to cut holes with up to 1 3/8 in. dia through materials to 1 in. thick, product measures 6 ½ x 11 11/16 x 7 13/16 in. Rated 120 V, 50/60 Hz and 8 A, unit includes motor that develops no-load speeds to 450 rpm. Magnetic base has 1,200 lb dead lift rating on 3/8 in. plate and 2165 lb on 1 in. plate, with drill point breakaway limits of 500 and 735 lb, respectively.

Milwaukee Electric Tool Corp.
Brookfield, WI 53005 2550
Oct 30, 2002 Lok-Torâ„¢ Series of 14.4 and 18 V driver/drills and hammer-drills offer all metal, single-sleeve, ratcheting chuck with carbide jaws. Three-stage system of 15 planets evenly disperses load of gear teeth. Drills produce speeds up to 1,700 rpm. Tools, with quiet spindle-lock mechanism, also offer externally replaceable brushes, soft-grip handle and finger grip, and reversible battery orientation.

S-B Power Tool Co. (Skil/Bosch)
Chicago, IL 60646 5925
Oct 25, 2002 Brute-Toughâ„¢ drill/drivers are designed with ½ in. chuck for continuous heavy use in high torque drilling applications. Models offer 1,500 rpm (14.4 V) and 1,300 rpm (18 V) in addition to 475 lb-in. torque. Compact-Toughâ„¢ drill/drivers, designed for tight spaces, feature 3/8 in. chuck and come in 9.6, 12, and 14.4 V models with speeds up to 1,200 rpm (12 and 14.4 V). All drill/drivers include Dura-Shieldâ„¢ exterior housing consisting of ABS/Nylon blend.

Hougen Mfg. Inc.
Flint, MI 48501 2005
Oct 16, 2002 Model HMD904 has drilling capacity of up to 1½ in. diameter and 2 in. depth of cut. Magnetic base provides 820 lbs. drill point breakaway force rating. It incorporates Hougen motor with electrical rating of 115 V, 60 Hz and 8.0 A to maintain cutting speeds and feeds. Design includes rear-mounted controls; side-to-side, reversible feed-handle configuration; motion sensor; and 2-stage, power-on switch. Drill uses Rotabroach® 12,000-Series Annular Cutters.

Makita U.S.A., Inc.
La Mirada, CA 90638
Oct 09, 2002 MForceâ„¢ drills are equipped with 2-piece D-31 motor, which utilizes high-grade field magnet. Armature is supported with dual sealed ball bearings. Shift Lockâ„¢ Drive System offers instant, 1-touch shifting from drill to driver mode. All metal gear transmission is protected in dust-proof housing. Three-stage, 13-planetary gear system provides smooth power. Units run on two 2.6 Ah Nickel-Metal Hydride batteries. They include keyless chuck, locking-ratcheting, and rubberized grip.

Metabo Corp.
West Chester, PA 19380 4243
Aug 29, 2002 Model BE622SR+L features triple reduction gear train, aluminum die-cast gear housing, and vario-speed electronic speed control. Reversing feature makes it easy to use for right- and left-handed operators. S-automatic slip clutch stops tool in event of bit jam. Drill has capacity up to 5/8 in. in steel and 9/16 in. in softwood. Rated input is 620 W with output power at 360 W. No-load speed is 0 to 550 rpm, and speed at rated load is 330 rpm.

CS Unitec, Inc.
Norwalk, CT 06850
Jul 08, 2002 Model ECO-32T magnetic drill can be used for both drilling and tapping. It uses annular cutters to drill holes up to 1 1/4 in. and comes with tap holders for tapping up to 3/4 in. dia holes. It also comes with carrying case, eye protection, ear protection, gloves, steel safety chain with carabin hook, Allen keys, and lubricant. Options include 1/2 in. geared chuck for conventional twist drilling, and automatic internal lubrication system for annular cutters.