Drilling & Tapping Tools

Related Categories
Portable Tools

Drill/Driver and Impact Driver operate on 20 V Li-Ion battery.

September 19, 2016

Part of Brushless EDGE™ family of tools, 20 V MAX Lithium Ion Brushless Drill/Driver (PCCK607LB) and 20 V MAX Lithium Ion Brushless Impact Driver (PCCK647LB) offer maximum runtime. Drill/driver features 2-speed gear transmission that delivers 0–450 rpm in low speed for high-torque applications and 0–1,800 rpm in high speed for maximum fastening speed. Each tool hosts onboard state of charge indicator, over-molded comfort grip, and LED work light. Read More

Electrical Equipment & Systems, Machinery & Machining Tools, Portable Tools

Cordless Battery, Tools, Accessories extend in-field runtime.

September 6, 2016

FLEXVOLT™ Power Tool and Battery System provides power comparable to that of corded tools for 20 V MAX System as well as 60 and 120 V MAX tools; 6.0 AH FLEXVOLT™ Battery automatically changes voltage when operator changes tools. Tools include circular saw, grinder, reciprocating saw, VSR stud and joist drill, table saw, fixed head compound miter saw, and sliding compound miter saw. Also available, 44 FLEXVOLT High Efficiency Accessories™ maximize runtime of cordless FLEXVOLT™ power tools. Read More

Portable Tools

PipeMan Products, Inc. - Becomes a SpeedTaps(TM) Dealer

June 16, 2016

PipeMan Products, Inc. has become an approved distributor of the revolutionary SpeedTaps™ tapping solutions in standard and metric sizes. Concord, CA – PipeMan Products, Inc. is proud to announce that it has become a distributor of the new SpeedTaps™ tapping solutions. When operated with impact wrenches, SpeedTaps™ out-tap traditional hand tap methods by 14 to 1 holes tapped. Many... Read More

Machinery & Machining Tools, Portable Tools

Makita Releases the Next Generation 12V Max Lithium-Ion

April 28, 2016

New 12V max CXT™ is more compact with more comfort and capacity La Mirada, Calif. – Makita, a pioneer in cordless technology, has released the next generation of 12 volt with the 12V max CXT™ Lithium-Ion cordless tool series. Makita 12V max CXT™ features slide-style batteries so each tool’s handle is built with ergonomics in mind – not around the stem of a battery – for improved... Read More

Portable Tools

Cordless Impact Tools deliver optimized torque values.

March 22, 2016

Offering electronic 3-speed power selection, 18 V LXT® Brushless Cordless Impact Tools include XWT07M/Z ¾ in. square drive impact wrench, XWT08M/Z ½ in. square drive impact wrench, and XWT09T/Z 7/16 in. hex chuck impact drill. While XWT07M/Z delivers 780 lb-ft fastening torque and 1,250 lb-ft breakaway torque, respective values for XWT08M/Z are 740 lb-ft and 1,180 lb-ft. Both impact wrenches feature Star Protection Computer Controls™. Model XWT09T/Z delivers 590 lb-ft drilling torque. Read More

Portable Tools

Portable Magnetic Drill has coolant bottle package.

February 10, 2016

Suited for repetitive hole drilling, HMD904 is offered with package that ensures adequate levels of coolant are continuously delivered to tool's cutting edge. Drill also incorporates LED indicator with circuitry that monitors critical magnet lift/shift sensor and switch, changing from green to red if unsafe condition exists. Powered by 7.2 A, 450 rpm motor, tool uses 12,000-Series Rotabroach® Annular Cutters for burr-free holes up to 1½ in. dia and 2 in. deep. Read More

Machinery & Machining Tools, Portable Tools

Magnetic Drilling Units are designed for heavy-duty applications.

September 15, 2015

Equipped with ACCUDRILL pressure indicator and material and thickness detector, ICECUT 100 (850 W, 600 rpm) and ICECUT 200 (300 and 600 rpm) promote safe and reliable use. ACCUDRILL safety amp meter in central control panel lets users optimize drilling operation productivity while preventing motor from overloading/overheating. Also included, material and thickness detector will not let drill start when magnetic holding power is insufficient to secure unit to work piece and operate safely. Read More

Fasteners & Hardware, Machinery & Machining Tools, Portable Tools

Blind Hole Taps machine stainless steels.

September 4, 2015

Designed for machining stainless steels and ISO M materials, TC142 Blind Hole Taps also have secondary application in ISO P materials, particularly in softer steels which require more chip control. Grade WW60RB, featuring wear-resistant coating, offers extended tool life and high cutting speeds for high-volume production. Grade WY80FC features vaporized surface that guarantees high level of process reliability thanks to optimized chip control. Read More

Machinery & Machining Tools, Portable Tools

Portable Magnetic Drill features automatic feed mechanism.

August 7, 2015

Suitable for production applications, MAB 825 V incorporates automatic feed mechanism with power retraction; double-insulated, 16 A, reversible motor with 4-speed oil bath gearbox; infinitely variable torque control; and full-wave electronics. Heavy-duty drill cuts holes up to 4 in. dia. in structural steel and other metals. Additional capabilities include twist drilling and reaming up to 1 ¼ in. dia, tapping up to 1 1/8 in. dia, and countersinking up to 2 in. Magnet holding force is 6,600 lb. Read More

Machinery & Machining Tools, Mechanical Components & Assemblies, Portable Tools

Programmable Hydraulic Tapping Arms combine power and efficiency.

July 14, 2015

Promoting machine tool utilization efficiency and shortening cycle times, FlexArm Hydraulic Tapping Arms run tapping and threading operations offline while CNC is running. Tapping 1 ½ in. in mild steel at 110 rpm is made possible due to Hydraulic Power Packs and gearboxes, and tapping and threading with FlexArm while lathe is running eliminates thread milling operations. End-users can program exact RPM for forward and reverse, and programmable depth control allows consistent tapping depth.
Read More

Machinery & Machining Tools, Portable Tools

Portable Magnetic Drill facilitates positioning via swivel base.

April 6, 2015

When attached to workpiece with 8,000 lb holding force magnet, MAB 525 SB provides 20° movement left and right and 5/8 in. forward and backward. Hole cutting capacity is up to 2 ½ in. dia in structural steel and other metals, and other capabilities include twist drilling up to 1 in. dia, tapping up to 15/16 in. dia, reaming up to 7/8 in. dia, and countersinking up to 2 in. Double-insulated, 14.5 A, reversible motor has 2-speed (70–280 rpm and 180–580 rpm) oil bath gearbox. Read More

Machinery & Machining Tools, Portable Tools

Portable Magnetic Drill features multi-axis positioning.

October 23, 2014

Used for job site drilling, boring, and slotting applications, MAB 800 KTS features infinitely variable torque control, servo-assisted drilling, 10 in. stroke, and full-wave electronics. Multi-axis positioning capability lets drill be adjusted up to 2 5/32 in. forward/backward and up to 4 ¾ in. left/right after magnet adheres to surface. In addition to cutting holes up to 2 3/8” dia, capabilities include twist drilling up to 1 in. dia. and tapping up to 1 1/8 in. dia. Read More

Portable Tools

Portable Magnetic Drill can be converted to standard drill press.

September 8, 2014

Featuring 8.2 A motor and no-load speed of 450 rpm, MABasic 200 drills up to 1¼ in. dia, 5¾ in. depth with annular cutters in structural steel and other metals. This heavy-duty, single-speed, 14¼ in. tall, 27 lb tool accepts cutters with ¾ in. Weldon Shank. With optional chuck, product converts to standard drill press with 6 1/3 in. stroke for conventional twist drilling up to ½ in. dia. Other features include internal lubrication system and Electronic Safety Shutoff Sensor. Read More

Construction Equipment & Supplies, Portable Tools

Portable, Trailer-Mounted Drill Rig is designed for shale.

May 12, 2014

Drilling rig T250XD provides 250,000 lb hook load using Telemast® technology and is equipped with LoadSafe XD fully-automated, hands-free pipe handling system. Rig is used for top-hole drilling and features top drive travel, operator's control room, and ability to interface with remote operating centers via satellite or Internet. Read More

Portable Tools

Versatile Portable Magnetic Drill with Reverse for Hole Cutting up to 2-1/2" Dia. and Tapping up to 15/16" Dia.

April 23, 2014

CS Unitec's MAB 525 portable magnetic drill has a hole cutting capacity up to 2-1/2" dia. in structural steel and other metals. The 14.5 amp, double-insulated, reversible motor has a 2-speed oil bath gearbox (70-280 and 180-580 RPM) ideal for annular cutters and twist drills. Additional capabilities include twist drilling up to 1" dia., tapping up to 15/16" dia., reaming up to 7/8" dia. and... Read More

Machinery & Machining Tools, Portable Tools

Through-Hole Tap is optimized for performance, life expectancy.

November 26, 2013

Designed for through-hole threads up to 3.5xD, Prototyp Prototex® Eco Plus is manufactured from HSS-E-PM and can be used on steel, stainless steel, and cast iron as well as such non-ferrous metals as aluminum and copper. Pre-treatment optimizes adhesion of THL hard material coating, increasing performance and tool life, while optimized geometry in chamfer section increases process reliability. Offered in several designs, tool can be supplied with internal cooling and radial coolant outlet. Read More

Machinery & Machining Tools, Portable Tools

WIDIA Vari Family of Tools Takes Efficiency to the Extreme

November 1, 2013

For milling, drilling, or tapping, VariMill™, VariDrill™, and VariTap™ deliver high performance and real economy. To address the unique needs of job shop customers and the distributors who serve them, the WIDIA VariMill™, VariDrill™, and VariTap™ are specifically engineered to be versatile, easy to choose, easy to use, and deliver superior results in a wide range of applications... Read More

Portable Tools

Panasonic Expands Its Lineup of "Tough IP" Cordless Power Tools with Two New Models

October 10, 2013

New Li-Ion cordless power tools debuts at ASSEMBLY Show 2013 NEWARK, N.J. -- Panasonic will announce the introduction of two new Li-Ion cordless power tools to its Tough IP(TM) professional-grade product offering at the ASSEMBLY Show 2013. Featuring dust and water resistant technology, the power tools have received an IP56 under international standards administered by the International... Read More

Machinery & Machining Tools, Portable Tools

Superior Tapping Performance in Multiple Materials from WIDIA(TM) VariTap

September 18, 2013

Latest tools built on 140-year legacy in tap design and engineering to deliver performance without compromise. Manufacturers, especially job shops, know better than most the pressures of ever-increasing customer demands and the equally demanding requirements to control costs. Multi-purpose tools have been one method many shops use to bridge the gap - excellent in certain materials and "good... Read More

Machinery & Machining Tools, Portable Tools, Sensors, Monitors & Transducers, Test & Measuring Instruments

Marposs Features in-Process Tool Monitoring System at Westec 2013

July 31, 2013

Auburn Hills, MI – Marposs Corp. will present its Artis CTM-V5 system with DDU-4 torque and feed force sensor for identifying tool breakage and worn tools at WESTEC 2013 in booth #1946. The DDU-4 sensor is suitable for monitoring drilling and threading (tapping or thread forming) processes, as well as forming processes such as stir friction welding, by means of axial force and torque... Read More