Ideal Industries, Inc.    Sycamore, IL 60178
Apr 11, 2013 Offering 4 defined ranges, SureTrace™ lets electricians select proper sensitivity for specific job. Circuit tracer pinpoints opens/shorts and identifies fuses and breakers on both energized and de-energized circuits from 0-600 Vac/Vdc. Unit includes display that provides numeric value between 0–99, variable pitch/tone audible indication, and peak detector that instantaneously registers signal strength. To minimize false signaling on noisy circuits, handset signal communication is tuned tight.

Klein Tools, Inc.    Lincolnshire, IL 60069
Aug 15, 2012 Conduit reaming drill head (Cat No. 85091) reduces time required for commercial electricians to ream and install conduit runs. Fitting into power drill chucks and quick release adapters, precision engineered replaceable blade reams ½, ¾, and 1 in. conduit using standard power tool. This U.S. manufactured tool, designed to minimize wrist strain experienced during extended conduit runs, includes replaceable No. 2 square recess bit for installing conduit fittings.

Thomas & Betts Corp.    Memphis, TN 38125
Aug 13, 2012 Employing battery-powered hydraulic system, Blackburn® Hydraulic PowerTap(TM) System eliminates cleaning associated with powder-actuated, fire-on style tool. Quick-connect coupler allows for positive engagement between tool head assembly and power unit. C-member of wedge-tap connector applies constant contact pressure to conductor through expansion and contraction of thermal cycling, while integrated positive-stop valve matches PowerTap(TM) System's output pressure to that of wedge-tap connector.

Klein Tools, Inc.    Lincolnshire, IL 60069
Jun 27, 2012 Available in 4 and 7 in. blade lengths, with ¼ and 5/16 in. tip sizes, Demolition Screwdrivers transfer impact force directly to work surface. Slotted drivers feature plated metal strike cap that protects handle from hammer blows. Manufactured and tested for prying and chiseling, screwdrivers can be used by electricians to bang out knockouts in junction box or for tightening locknuts.

Ideal Industries, Inc.    Sycamore, IL 60178
Sep 27, 2010 Designed for electricians, 21-n-1 Twist-a-Nut(TM) has 4 most frequently used bits pre-loaded into driver shaft. Additional 12 bits are securely stored for quick access within handle. Dual interchangeable chrome-vanadium shafts are designed for driving ¼, 5/16, and 7/16 in. nuts, and handle also has 2 Accu-Loop(TM) wire looping holes along with Wire-Nut® ratcheting wrench formed into its bottom. Tool is built around all-metal, 28-tooth ratcheting mechanism that delivers 225 lb torque.

The Oel Sales Company    Palmer Lake, CO 80133
Sep 09, 2008 Tested to 10,000 Vac and rated for 1,000 Vac max exposure, Insulated Tool series promotes safety when working around electricity. OEL COMBINATION TOOL has wall drive profile that distributes torque load to fastener through flats, optimizing area of force application as well as lowering possibility of distortion to nut or bolt head. Capable of exceeding tightening torques specified in DIN standard by 70-100%, each socket or spanner fits Metric and Inch series fastener.

Del City    Menomonee Falls, WI 53051
May 30, 2008 Featuring ergonomic, cushioned handles, line of Circuit Alert(TM) Tools includes screwdrivers, wire strippers, pliers, flashlights, and utility knives, all with built-in removable voltage detector that produces audio and visual alert when it detects live circuit. Tools are made of forged steel for light weight, and many are multifunctional for completing variety of tasks.

JDV Products, Inc.    Fair Lawn, NJ 07410
May 16, 2008 Customizable with JDV or Standard Pneumatic brand tools to meet unique application needs, KTW6021 Series provides all essential tools for terminating 22-24 or 24-26 AWG wire-wrapping applications. Kits includes Standard Pneumatic brand (model 6021) 120 V wire wrap tool, bit/sleeve, hand wrap tool, unwrap tool, cut/strip tool, and deep cavity tool pouch. Left handed tool pouches are also available.

Stanley-Proto Industrial Tools; A Division of The Stanley Works    Conyers, GA 30013
Nov 01, 2007 Insulated product line consists of 350+ items, including screwdrivers, pliers, cutting tools, wrenches, drive tools, and keys as well as insulated gloves. Orange plastic insulation protects users from shock when working on live circuits of up to 1,000 Vac and 1,500 Vdc. VE Series tools are designed for craftsmen who install and maintain standard electrical equipment and wiring, while VSE Series tools are for use around highest live voltages and are wrapped with 2 layers of insulation.

FCI/Burndy Products    Manchester, NH 03108
Jan 22, 2007 Offering one-handed operation for advance, retract, and hold functions, BURNDY PATRIOT(TM) PAT644XT-18V suits contractor, utility, and telecommunications applications. Self-contained unit is ergonomically constructed and has hydraulic pump, transmission, and piston design. Along with crimping head design capable of 360° rotation for any-position operation, tool uses 2.6 AH high-capacity 18 V Ni-MH battery that eliminates voltage depression and features 11 tons of output force.

Ideal Industries, Inc.    Sycamore, IL 60178
Nov 06, 2006 Coax connector tool works on compression-style hex F connectors in CATV installations and BNC style connectors employed for CCTV. For use in space-restricted areas, shaft size lets installer slide tool's open socket onto connector and tighten or loosen it without damaging termination. Threaded end holds F connectors during cable insertion to facilitate connector seating against dielectric. While promoting torque delivery, no-slip grip handle also reduces hand fatigue.

Bondhus Corp.    Monticello, MN 55362 9347
Sep 07, 2006 Suited for use with electrical equipment, E-Smart Tools are tested to 10,000 V to assure integrity of insulation, and are certified to 1,000 V. Screwdriver blades are machined from European chrome/molybdenum/vanadium steel and heat-treated to highest possible hardness levels. With button attached, tools may be used with one hand as precision screwdrivers, or when locked into supplied handle, can be used as full sized screwdrivers.

Cementex Insulated Tools Co.    Burlington, NJ 08016
Apr 10, 2006 Basic Electrician's Kit consists of 8 pieces, all double-insulated and certified for use to 1,000 Vac/1,500 Vdc. It comes in custom soft briefcase with slot for each tool, including 9 in. Lineman's Pliers, 8 in. Chain Nose Pliers, 7¾ in. Hi-Leverage Curved Pliers, and 7 5/8 in. Wire Stripper. Three screwdrivers include ¼ x 4¼ in. Mechanics Tip, 3/16 x 6 in. Cabinet Tip, and No 2 x 4 in. Phillips, all with cushion grip handles.

FCI/Burndy Products    Manchester, NH 03108
Sep 20, 2005 Consisting of head and power unit in one-piece assembly, BURNDY WEJTAP(TM) uses power-driven, aluminum alloy wedge to lock tap cables into self-adjusting, C-shaped spring body, maintaining consistent pressure throughout life of connection. Wedge's wiping action, in combination with PENATROX(TM) PENA 13 oxide-inhibiting compound, provides contact integrity. Breech-loaded tool incorporates automatic forward-venting gas release directed away from operator.

Klein Tools, Inc.    Lincolnshire, IL 60069
Jul 26, 2005 Comprised of 6 pieces, trim-out set (Cat No. 80006) enables electricians to handle daily projects. It includes heavy-duty 2000 Series® 9 in. side-cutting pliers, Klein-Kurve® wire stripper/cutter, and 4 in. round shank No. 2 Profilated® Phillips-tip screwdriver in addition to ¼ in. cabinet-tip screwdriver with 4 in. heavy-duty round shank, and 4-pocket tool pouch. Set also comes with Klein® lightweight utility belt (Cat No. 5204).

Times Microwave Systems    Wallingford, CT 06492 5039
Apr 05, 2005 Designed for use with LMR-240 low loss cable, ST-240EZ tool prepares cable to exact dimensions in one step, while DBT-02 tool removes burrs from exposed center conductor. EZ non-solder connectors, which include QMA male, QMA male RA, SMA male, SMA male RA, and N male types, are supplied with adhesive-lined ATUM boot. Optimized to facilitate termination, all connectors are suited for use in True Position E911 installations.

Cooper Wiring Devices Div., Cooper Industries    Long Island City, NY 11101
Mar 16, 2004 Suited for industrial, commercial, and residential applications, G-Tool, with built-in level, helps ensure proper installation of single-gang to 20-gang devices such as toggle, decorator, duplex, and any combination of switches. Product enables proper wallplate fit without need to make further adjustments. It operates with swivel and snap arm up for toggle switches and down for decorator or duplex devices.

Ideal Industries, Inc.    Sycamore, IL 60178
Mar 12, 2004 Smart-Gripâ„¢ electrician's tools include 9¼ in. side-cutting linesman pliers with optional crimp, 8 in. diagonal pliers with optional angled head, 7¾ and 8½ in. needle-nose pliers, 9½ and 10 in. tongue-and-groove pliers, cable cutter, and multi-crimp tool. Pliers are rated for cutting screws, nails, hardened wire, and ACSR. All tools have textured, dual-durometer Santoprene® handle and feature dropforged carbon-steel construction and induction-hardened cutting edges.

JDV Products, Inc.    Fair Lawn, NJ 07410
Sep 25, 2003 Cut/Strip/Wrap (CSW) bit and holder consists of open-faced tool that cuts, strips, and wraps wire in one operation. Able to wrap wire directly from reel or harness, product is designed for applications wrapping 24 and 26 AWG wire; 30 AWG capacity is available upon request.

General Machine Products Co.    Trevose, PA 19053
Sep 10, 2003 Portable Breeze micro-fiber cable blowing machine features compliant double-driven rollers for secure grip of cable. Tornado, with hydraulic power pack, moves fiber-optic cable of 0.23-1.25 in. dia at speeds to 300 fpm into pre-installed innerduct or direct-buried duct. Model C2 Cable Lasher provides cable or bundle capacity from 1 5/8-1 7/8 in. and overlash capability. Duct Rodders are constructed of fiberglass strands impregnated with thermosetting gel.