FiberFin, Inc.
Yorkville,, IL 60560
May 18, 2007 Intended for use with Versatile link® connectors, Installer's Tool Kit includes hand tool that can terminate fiber and strip jacket to proper length, as well as crimp tool that installs connector with consistent results every time. Blade on termination tool is mounted on gear assembly that rotates blade every time user cuts fiber for even wear. After 1,260 cuts, cutting assembly will stop and prevent usage of unit until replacement cutting head is installed.

ACT Fastening Solutions
Gardner, MA 01440
Mar 29, 2007 Designed to save time and cost associated with replacing nicked wires and hoses damaged during maintenance and repairs, hand tools feature smooth safety guards that slide behind strap to prevent sharp blades from contacting bundled items. Features include ergonomic cushion grip handles designed for optimal natural hand contraction and auto return spring. Intended users include maintenance technicians, assemblers, shipping and receiving personnel, and electricians.

Ideal Industries, Inc.
Sycamore, IL 60178
Mar 20, 2007 Able to strip RG-59, RG-6, and RG-6Q coaxial cable without nicks, Coax/UTP Combo Stripper is equally effective on unshielded twisted pair cable, including CAT 3, CAT 5e, and CAT 6. Users do not have to remove and replace stripping cartridges when moving from one cable type to another. Pre-measured stop eliminates measuring and trimming, while Push-in Ring prevents sharp coax conductor from injuring user's hand while terminating cable with push-on style connector.

FCI/Burndy Products
Manchester, NH 03108
Jan 22, 2007 Offering one-handed operation for advance, retract, and hold functions, BURNDY PATRIOT(TM) PAT644XT-18V suits contractor, utility, and telecommunications applications. Self-contained unit is ergonomically constructed and has hydraulic pump, transmission, and piston design. Along with crimping head design capable of 360° rotation for any-position operation, tool uses 2.6 AH high-capacity 18 V Ni-MH battery that eliminates voltage depression and features 11 tons of output force.

Ideal Industries, Inc.
Sycamore, IL 60178
Nov 06, 2006 Coax connector tool works on compression-style hex F connectors in CATV installations and BNC style connectors employed for CCTV. For use in space-restricted areas, shaft size lets installer slide tool's open socket onto connector and tighten or loosen it without damaging termination. Threaded end holds F connectors during cable insertion to facilitate connector seating against dielectric. While promoting torque delivery, no-slip grip handle also reduces hand fatigue.

Komax Corp.
Buffalo Grove, IL 60089
Sep 08, 2006 Stripping wire sizes from 36-10 AWG, Cosmic 927R wire stripper features micrometer dial for choosing stripping diameter in 0.01 mm increments, and shows selection via digital display. Portable device operates on 100 Vac, 60 VA. Rotating 4 blade stripper allows selection of full or partial pull-off lengths from 1-25 mm. Stripping head rotation and twist (or non-twist) direction is changeable from clockwise to counterclockwise. Foot switch and air blow-out kit options are available.

Bondhus Corp.
Monticello, MN 55362 9347
Sep 07, 2006 Suited for use with electrical equipment, E-Smart Tools are tested to 10,000 V to assure integrity of insulation, and are certified to 1,000 V. Screwdriver blades are machined from European chrome/molybdenum/vanadium steel and heat-treated to highest possible hardness levels. With button attached, tools may be used with one hand as precision screwdrivers, or when locked into supplied handle, can be used as full sized screwdrivers.

Tyco Electronics Corp.
Harrisburg, PA 17105-3608
Sep 06, 2006 Cosmic 927R Micro-Cable Stripper strips conductors from 36-10 AWG, and features controls allowing stripping diameters to be set in 0.1 mm increments. Machine is capable of stripping lengths from 1-25 mm, with partial lengths of 1 mm possible. Device features 1.5 sec maximum cycle time, and is suited for use with Teflon insulation, rubber, and various wire and cable insulations and jackets.

Thomas & Betts Corp.
Memphis, TN 38125
Jul 24, 2006 Suited for making connections in corrosive or high-moisture environments, Sta-Kon® Heat-Shrink Terminal Kit includes ring terminals and butt splices, as well as ratchet crimp tool, wire stripper, and butane torch. Terminals and splices are self-insulated with heat-shrinkable, cross-linked polyolefin and internally coated sealant. Terminals feature brazed seams to prevent separation of terminal during crimping and internal serrations for increased pullout resistance.

Klein Tools, Inc.
Lincolnshire, IL 60069
Jun 22, 2006 Available in 2 models, Klein® heavy-duty ratcheting cable cutters enable users to cut copper and aluminum cables without leaving burrs or sharp edges. Model 63600 has capacity to cut 600 MCM copper, 600 MCM aluminum, and communication cable measuring 1¾ in., while model 63750 cuts 1,000 MCM copper, 1,000 MCM aluminum, and communication cable measuring 2 1/16 in. Designed for confined work spaces, they are constructed with hardened steel cutting blades.

Ideal Industries, Inc.
Sycamore, IL 60178
Jun 09, 2006 Constructed of polypropylene plastic, Tuff-Grip PRO(TM) Fish Tape features full-perimeter handle that minimizes intake of dirt and moisture and accommodates large, gloved hands. Case facilitates process of installing replacement tapes, while non-slip fingertip grooves provide secure grip, and tape retaining feature keeps tape properly positioned in opening.

Ripley Co.
Cromwell, CT 06416
May 24, 2006 Designed for safe end stripping of primary cable, WS 5A-DA features removable 3/8 in. adapter that allows tool to be driven by electric or battery-operated power drill. Product strips XLPE, polyethylene, and EPR insulation up to 400 mil thick on 600 V to 35 kV cables. Also suited for primary URD cable, adjustable end stripper has guarded cutting blade, knob for setting strip length from .625-2.5 in., and ability to accept SW-2 ratchet wrench for leverage.

Greenlee Textron, Inc.
Rockford, IL 61109
May 03, 2006 Model ES25 battery-powered ratchet style cable cutter is designed for ACSR and other steel reinforced cables. Unit weighs 7.7 lb, is operable with one hand, and suits overhead crews at power utilities and utility contractors. Cutter features 14.4 V NiCd battery, and makes about 50 cuts of Grosbeak or 120 cuts of Merlin on 1 battery charge. Blades are contoured to slice aluminum strands and then snap steel strands. It comes with 2 batteries, battery charger, and molded carrying case.

RIDGID
Elyria, OH 44035
Apr 11, 2006 Made of high carbon, heat-treated steel, RIDGID® electrical hand tools line comprises 10 models for cutting, stripping, and crimping stranded copper, copper, coaxial, and fiber optic cables. Tools feature RIDG-BACK(TM) cutting blade, return-spring, and cushion-grip handles for operator comfort. Paint-filled tool graphics provide quick and long-lasting identification of all tool functions, and application markings are indicated on tool handle.

Cementex Insulated Tools Co.
Burlington, NJ 08016
Apr 10, 2006 Basic Electrician's Kit consists of 8 pieces, all double-insulated and certified for use to 1,000 Vac/1,500 Vdc. It comes in custom soft briefcase with slot for each tool, including 9 in. Lineman's Pliers, 8 in. Chain Nose Pliers, 7¾ in. Hi-Leverage Curved Pliers, and 7 5/8 in. Wire Stripper. Three screwdrivers include ¼ x 4¼ in. Mechanics Tip, 3/16 x 6 in. Cabinet Tip, and No 2 x 4 in. Phillips, all with cushion grip handles.

Klein Tools, Inc.
Lincolnshire, IL 60069
Mar 13, 2006 Multifunctional, lightweight, large gauge Wire Stripper/Cutter (Cat. No. 11053) cleanly shears 6-32 and 8-32 screws and has serrated pliers nose for pulling, gripping, and twisting wire with minimal pressure. Curved handle design and double-dipped textured grips provide control and comfort. Made of heat-treated tool steel for durability with black oxide finish for corrosion resistance, tool features coil spring for self-opening action and closure lock for storage.

Klein Tools, Inc.
Lincolnshire, IL 60069
Jan 12, 2006 Featuring integral guards that prevent shock resulting from hand contact with energized sources up to 1,000 V, model 11049-INS has 5 precision-ground stripping holes designed for removing insulation from 8, 10, 12, 14, and 16 AWG stranded wire. Gauge markings are located on both sides of tool, and black-oxide finish resists corrosion. While shear-type cutting blades provide clean cuts, spring-loaded self-opening feature facilitates repetitive use.

Schleuniger, Inc.
Manchester, NH 03103
Jan 09, 2006 Featuring menu-guided programming, CoaxStrip 5500 utilizes 4-blade design to process thin, difficult-to-strip or out-of-round insulation types. It can strip coaxial, triaxial, and multiconductor cables as well as single conductor wires up to .590 in. OD at rates to 450 cables/hr. In addition to graphic display and programmable gripper force, product offers 3.35 in. max stripping length and memory storage capacity for up to 1,000 cables and 100 wire lists.

Klein Tools, Inc.
Lincolnshire, IL 60069
Dec 13, 2005 Featuring curved handles, Klein-Kurve® multifunctional tool (Cat. No. 11055-INS) cuts, strips, loops, and gauges solid and stranded wire while protecting user against shock from energized sources up to 1,000 V. It features 2 layers of insulation, integral guards to prevent hand contact with conductive parts, and gauge markings on both sides. Measuring 8 in. long, unit strips 10-18 solid and 12-20 stranded AWG wire and cleanly shears 6-32 and 8-32 screws.

Waytek Inc.
Chanhassen, MN 55317
Dec 06, 2005 Pressmaster self-adjusting cut and strip tool, Stock No. 555, can be used on over 90% of wires without requiring adjustment. It will cut and strip 34-8 gauge wire. Also available, Stock No. 556 heavy-duty cable stripper handles cables of all insulation types. Tool handles cable up to 1.57 in. and insulation thickness to 0.18 in. Used for removing insulation from copper and fiber optic cables, Stock No. 557 handles cable up to 0.43 in. and insulation thickness to 0.04 in.