Portable Tools

Portable Tools

Pipe Press Kits feature blow-molded carrying case.

September 4, 2014

Weighing 21 lb lighter than previous models to facilitate carrying on and off jobsite, MegaPress® Kits include RIDGID Press Tools, Jaws, Rings, and Prep Tools built for demanding applications. Flameless system eliminates need for hot work permits. Press connections can be made on wet system. Kits include ½–2 in. Full MegaPress Kit and ½–1 in. Jaw-Only MegaPress Kit. Read More

Portable Tools

Cordless Impact Wrench delivers precise fastening control.

September 3, 2014

Combining extended run time of brushless motor technology with 18V LXT® Lithium-Ion 4.0 Ah battery, Model XWT02M provides 3 speed settings for fastening applications with ½ in. sockets. Low, Medium, and High Speed settings offer speeds from 0–1,600, 0–2,100, and 0–2,800 rpm with 0–1,800, 0–2,600, and 0–3,500 impacts/min, respectively. Star Protection Computer Controls™ allow... Read More

Electrical Equipment & Systems, Portable Tools

EC&M Announces Klein® Tools Wins 2014 Product of the Year

September 3, 2014

Klein Tools’ Open Jaw Cable Cutter Receives Platinum Award (Lincolnshire, IL) - Klein Tools (www.kleintools.com , for professionals since 1857, was awarded the ECM Product of the Year award for the Open Jaw Cable Cutter (Cat. No. 63711). The new tool earned high marks for solving a common problem identified by customers. Electricians and overhead and... Read More

Electrical Equipment & Systems, Machinery & Machining Tools, Portable Tools

Eraser's Model MMC200 Can Cut a Virtually Limitless Range of Materials

August 29, 2014

Eraser's Model MMC200 Multi-Material Cutter offers users a wide range of industrial cutting applications. The unit can process tubing up to 5/8" (15.8mm) OD, flat material up to 3.94" (100mm) wide and round copper wire up to 10AWG (2.58mm) solid.  Rollers and diameter settings are easily adjusted to accommodate different material sizes. Boasting a maximum cutting force of 600 pounds, the... Read More

Portable Tools

Ergonomic Scissor cleanly cuts difficult threads, cords, yarns.

August 26, 2014

Designed for cutting threads, cords, and yarns that are waxed, fluffy, soft, and slippery, Model 441 Thread & Cord Scissor is ergonomically designed with open handles for comfortable fit in smaller hands. Design does not have any finger loops and includes soft rubber grips and Light-Touch™Â return spring. Sharp, tapered cutting blades feature one serrated edge for holding threads, cords,... Read More

Electrical Equipment & Systems, Portable Tools

Cable Termination Tool exceeds 10-Gig performance standard.

August 25, 2014

Combining 2 crimpers into single tool for 2-step crimping, Tele-Titan™ Xg 2.0 terminates to industry-specified crimp heights while achieving straight action crimp with minimal hand force. Tool features S45C carbon steel frame with rust-resistant black oxide finish and gun-style lock for secure closure. Suitable for use with Cat6E, Cat6A, Cat7, and over-sized Cat5e/6 industrial Ethernet... Read More

Machinery & Machining Tools, Portable Tools

Modular Punch Assemblies feature one-piece design.

August 22, 2014

Featuring punch-and-die design to make custom-shaped cut-outs, Modular Punch Assemblies can punch holes in flexible materials such as films, foils, paper, nonwovens, hose, tubing, tape, foam, rubber, mesh, laminates, and medical devices. Units are also capable of creating virtually invisible micro punches. Available in pneumatic or electric configurations, punch units use hardened-steel tooling... Read More

Portable Tools

Pneumatic Chain Saws feature patented chain brake.

August 22, 2014

Equipped with 4 hp motor that consumes 92 cfm of air at 90 psi, Series 5 1026, 5 1027, 5 1028, and 5 1029 are available with cutting capacity of 15, 17, 21, or 25 in. Units include Armor Tipped Guide Bar, Super Chisel saw chain 404 pitch, two separate oil lubricating systems for chain and motor, and chain brake that stops chain movement during kickback or repositioning of saw during cutting.... Read More

Portable Tools

Torque Wrenches feature self-locking adjusting knob.

August 21, 2014

Featuring large white/black, high-contrast external scale, QL5 Series Adjustable Torque Wrenches enable torque value to be set on unit. Tools also include re-designed 2-tone color grip which features different ranges, scale, and adjustment style. With multi-color grip cap options, operators can identify wrench for different uses or job purposes. Lightweight Model QLE2 features press lock... Read More

Electrical Equipment & Systems, Portable Tools

Self-Adjusting Wire Stripper features built-in cutter.

August 14, 2014

Made from high grade polymers and carbon steels, Maxim 6 features stripping range of 24–10 AWG and cutting range of 30–10 AWG. Autoform laminated stripping jaws form around radius of cable to prevent damage to inner conductor, while built-in wire stop measures strip length. Suitable for round, oval, and flat wire cable, tool has ergonomic handle designed to minimize fatigue. Read More

Portable Tools

Battery-Powered Heat Gun offers digital temperature control.

August 8, 2014

Letting users preset operating temperature, MCH-100-D reaches up to 900°F and features programmable PID controller that can maintain working temperature within ±1°F of set point. Portable hand-held tool, powered by 48 V rechargeable battery, incorporates thermocouple inside heating element housing for optimum efficiency and accepts 100+ specialty stainless steel air nozzles.... Read More

Labels Tags Signage & Equipment, Portable Tools

Laser Marking Machine delivers 50 W of power.

August 6, 2014

With 50 W fiber laser, Model TF450 vaporizes material, creating completely unalterable marking. Laser interaction offers opportunities for deep engravings, especially in hard materials such as metals. In addition to contrasted marking and micro-machining, machine is approved for cutting metal sheets up to .118 in. thick. Typical applications include engine block and chassis burning, water meter... Read More

Cleaning Products & Equipment, Electrical Equipment & Systems, Portable Tools

Bidirectional Cutter clears stubborn drain clogs.

August 5, 2014

Used for drain cleaning applications, Spider double cutter features front and rear blades. Cutting starts as cable feeds into line and continues as it retracts to increase chance of removing stoppages and promote thorough cleaning. Double U-Cutter and Double Heavy Duty Side Cutter models are both offered in 3 and 4 in. sizes, and Double U-Cutters can also be adapted to sectional machines or to... Read More

Portable Tools

CS Unitec's Non-Sparking Machine Chisels

August 4, 2014

CS Unitec's line of Non-sparking, corrosion-resistant pneumatic machine chisels are ideal for breaking or chipping concrete, asphalt or soil with paving breakers and other demolition tools. Manufactured from Copper-Beryllium or special Aluminum-Bronze alloys, the chisels are specifically made to eliminate the risk of sparks at sites where explosive atmospheres may be present. These special alloys... Read More

Material Handling & Storage, Packaging Products & Equipment, Portable Tools

PneumaticScaleAngelus to Promote New Angelus V-Series Seamers and More at Pack Expo 2014

August 1, 2014

STOW, Ohio — PneumaticScaleAngelus, a global provider of fillers, cappers, can seamers, labelers, wet case detectors, orienters and centrifuges, will promote its latest innovations in technology at Pack Expo 2014, November 2 to 5, in booth #S-2100 at the McCormick Convention Center in Chicago, Illinois. A team of professionals from PneumaticScaleAngelus will be available in booth #S-2100... Read More

Machinery & Machining Tools, Materials & Material Processing, Portable Tools

Metcal to Demonstrate Updated Rework Product Family NEPCON South China

August 1, 2014

GARDEN GROVE, CA – Metcal today announced that it will exhibit in Booth #A-1K25 at NEPCON South China, scheduled to take place August 26-28, 2014 at the Shenzhen Convention & Exhibition Center. The new MX-500 Soldering and Rework System, HCT2-120 Hot Air Pencil and new features on the Scorpion will be demonstrated. Metcal’s updated MX-500 Soldering and Rework System builds on the features... Read More

Machinery & Machining Tools, Portable Tools

Press Brake Tooling supports all sheet metal fabrication.

July 31, 2014

Available for press brakes configured with European Precision Style and Wila Trumpf Style tooling, Press Brake Tooling line includes expansive array of punches, dies, standard specials, specials, and accessories, offered in segmented, full-length, and half-length sizes to suit nearly any metal bending application. Tooling is manufactured from premium alloy tool steels with wear surface of punches... Read More

Labels Tags Signage & Equipment, Machinery & Machining Tools, Optics & Photonics, Portable Tools

Material Processing System accepts 2 air-cooled CO2 lasers.

July 30, 2014

Consisting of 40 x 24 in. laser material processing area and advanced beam delivery system, Model XLS 10.150D is used for cutting organic materials and marking/engraving of both organic and inorganic materials. System provides high-speed beam positioning using rigid, friction-free motion system with servo driven motors. It features full color LCD, multiple focusing modes, and Laser System Manager... Read More

Electrical Equipment & Systems, Portable Tools

Coax Cable Cutter cuts copper-clad steel cable.

July 30, 2014

Featuring specialized notched blade, Model CCS can cut steel-core coaxial cable without damaging knives or deforming cable. Shears can also cleanly cut and snip solid and stranded copper, aluminum, and UTP/STP twisted pair wires and cables. Made of through-hardened tool steel with hot-riveted joint, tool features high-leverage handles for one-handed operation. Cutter is suited for... Read More

Portable Tools

Rotary Polisher offers electronic speed control.

July 25, 2014

Powered by 10 A motor with variable speed trigger and dial that delivers no load speed of 0–3,000 rpm, 7 in. Model 9237C includes soft-start feature that ensures smooth start-ups and minimized fling-off of polish, wax, or paste. Wire mesh intake covers prevent wool fibers and other debris from entering motor. For comfort, polisher features lock-on trigger switch. Rubberized gear housing and... Read More