Portable Tools

Machinery & Machining Tools, Portable Tools

Abrasive Saw cuts pipe up to 5 ft in diameter.

December 11, 2001

Air-powered APS-438 saw and track mount assembly can square cut any diameter pipe from 6-60 in. O.D. up to 4 in. thick with ±1/8 in. accuracy and no heat affected (HAZ) zone. Its stainless steel track mounts securely around pipe's circumference and pipe trolley on which abrasive saw travels. Saw uses fiberglass reinforced blades from 8 to 12 in. O.D., or optional carbide tipped blades, and... Read More

Machinery & Machining Tools, Portable Tools

Hammer Drill has drill chuck capacity of 1/2 in.

December 11, 2001

Model FDV16VB Hammer Drill's low noise cooling air-flow design ensures protection against overheating. It contains ball and needle bearings, and is double insulated. FDV16VB's 5 AMP power-plus motor delivers no-load speeds of 0-2900 RPM with 550 W input. Other features include pistol type handle, keyless chuck, pressure sensitive trigger, and variable speed preset dial. Impact drill or drill only... Read More

Portable Tools

Cordless Kit contains collection of tools.

December 11, 2001

KC18DB 18 V cordless combo kit includes 18 volt 1/2 in. cordless driver drill with variable 2 speed transmission, circular saw, cordless torchlight, 2 rechargeable nickel cadmium batteries, and battery charger, all custom bundled in specially designed case. Drill and circular saw are powered by interchangeable high capacity nickel-cadmium batteries. Electronic feedback power control increases... Read More

Portable Tools

Stapler operates at 12.7 staples per second.

December 5, 2001

Pneumatically operated N5008AC Standard Crown Stapler features cylinder valve firing mechanism and aluminum magazine. Nail-driving depth can be adjusted for counter-sinking or flush-driving. Handle is equipped with durable rubber grip for comfortable use. N5008AC uses 16 gauge, 7/16 in. crown staples that are 1 to 2 in. in length, and features maximum staple capacity of 160. Operating pressure is... Read More

Portable Tools

Framing Nailer handles lengths from 2-3/8 to 3-1/2 in.

December 5, 2001

Model NR90AC2 Full Head Framing Nailer has 1-piece solid extruded aluminum magazine, die-cast aluminum body, and air inlet dust filter. It operates at pressures of 70 to 100 psi, and is capable of driving up to 3 round head nails per second. Features include aggressive nail push lever, idling protector, depth-of-drive adjustment dial, and 360° exhaust. It can handle 50 to 60 nails (2 strips)... Read More

Portable Tools

Framing Nailer fires at up to 3 nails per sec.

December 5, 2001

NR83AA2 Clipped Head Framing Nailer features push lever that prevents nail jamming, and one-piece rear-loading aluminum magazine which holds up to 96 nails. It weighs only 8.4 lb and includes band rubber grip. Toe push lever resembling a claw grips wood surface being nailed and eliminates slippage when driving nails in slanted direction. NR83AA2 uses 0.113 to 0.131 in. dia nails in lengths from 2... Read More

Portable Tools

Tin Snips cut stainless steel and other metals.

December 3, 2001

IDEAL Aviation Tin Snips, featuring black-oxidized chrome-moly steel forged blades, meet ANSI and DNI standards. They are available in straight, left, and right cutting designs, and feature hardened and serrated cutting edges that enable stable hold when cutting. Snips include secure safety latch with quick opening/closing design, plus dual-durometer grips that offer comfort and non-slip gripping... Read More

Portable Tools

Roll Marking Tool handles 4,000 parts per hour.

December 3, 2001

Mite-E-Roll high-speed pneumatic unit is available in three models for marking round parts from 1/8 to 2 in. dia. Three power options are available to cover variety of legend and material requirements and ensure proper marking pressure. Typically, as part diameter gets smaller, surface in contact gets smaller, requiring less power to imprint mark. Unit can be provided as separate stand-alone... Read More

Machinery & Machining Tools, Portable Tools

Brushes feature high filament density.

November 30, 2001

Bradex® Composite hub fiber abrasive radial wheel brushes have embedded fibers across entire surface of their indestructable cores. This reduces filament breakage and allows filaments to perform consistently throughout wear process. Wheels are well balanced to aid in reducing machine fatigue. Read More

Electrical Equipment & Systems, Portable Tools

Wire Stripping Module retrofits to crimping machines.

November 28, 2001

Wire stripping module, via microprocessor controller, can operate as stripping machine, crimping machine, or stripper-crimper. Stripper module works with end and side feed heavy-duty mini applicators suitable for 32 to 14 AWG wire. Stripping blades are titanium nitride coated, and wire slugs are air-ejected to collection trays. Strip length is adjustable from 0.100 in. to 0.400 in. Module... Read More

Portable Tools

Ratchet Tool crimps and embosses connectors.

November 28, 2001

Y1MR Hytool has 4 color-coded die grooves and accommodates No. 8 to No. 1 copper lugs and splices as well as copper C-Tap connectors. In addition to standard red, blue and grey grooves, it has combination brown/green die groove, which can be used for standard brown applications and crimping green YAICL-type connector with No. 1 AWG or No. 2 Flex Cu conductor. Die will emboss connector with brown... Read More

Portable Tools

Adjustable Screwdriver eliminates overtorquing.

November 27, 2001

Adjustable torque manual screwdriver lets operator dial in torques from 20 oz-in to 40 ft-lb. via twist action. Slip clutch prevents over-torquing, and driver automatically resets for next fastener after torque is reached. 3 models are available: 20-100 oz-in, 3-15 ft-lb, and 5-40 ft-lb. Preset manual torque drivers are also available. All manual drivers are calibrated to meet/exceed accuracy and... Read More

Portable Tools

Sewage Grinder handles flow rates to 14 MGD.

November 21, 2001

TASKMASTER TITAN provides high capacity grinding with low headloss. It employs twin shaft grinding, where one cutter stack intermeshes with disks. As wastewater enters, it is confronted with wall of cutters which are impossible to avoid or bypass. Solids are finely ground by shear forces of close fitting intermeshing cutters while liquids pass through unit unobstructed. It reduces solids such as... Read More

Portable Tools

Impact Wrench is pneumatically powered.

November 19, 2001

Model 7560 comes in 4 anvil configurations: 3/4 in. with socket ring retainer; 3/4 in. with through socket retainer; 1 in. square drive with through hold; and #4 spline anvil with button retainer. Torque output rating is 1,025 ft-lb. Grip handle has been improved. Read More

Electrical Equipment & Systems, Portable Tools

Wire Stripper suits electronic/electrical applications.

November 17, 2001

Small Gauge Wire Stripper is designed to cut and strip solid or stranded #16-30 AWG wire. 7 stripping stations perform clean strips without damaging conductors or tearing insulation. Its built-in looping hole is suitable for shaping wire to attach on screw terminals. Serrated pliers nose allows users to grip, pull and twist wire. Cushion grip handles are ergonomically designed for comfort, and... Read More

Portable Tools

Mortar Mill grinds up samples for analysis.

November 15, 2001

MS 100 Rapid Mortar Mill homogenizes sample volumes of 2 to 25 mL to particle size less than 20 microns, enabling samples to be pelletized for subsequent use in X-ray fluorescence or other spectral analyses. Grinding sets are available in 2 sizes and 5 different materials. Required fineness is typically achieved in 3 to 5 min. Unit has digital speed control settings for mortar and pestle, timer,... Read More

Portable Tools

Polisher is designed for the die mold industry.

November 8, 2001

Sheenus Ultrasonic Polisher operates at 23,000 Hz with output powers of 20 W in low power mode and 45 W in high power mode. Strokes range from 3 to 40 microns. Accessories include diamond files and fixtures for a variety of tool types. Read More

Portable Tools

Measuring Tapes for engineers and surveyors.

November 8, 2001

Starrett measuring tapes are made with rigid, wear-resistant nylon clad steel. The 1/2-in. blade is easy to read. Its high-visibility yellow side gives graduated feet and inches while the white side is graduated engineer's style in decimal tenths of a foot. The open-reel handle rewinds easily. Tapes come in three lengths: 100, 200 and 300 ft. Read More

Material Handling & Storage, Portable Tools, Safety & Security Equipment

Tool Lanyards comply with OSHA guidelines.

November 8, 2001

Miller® Bandit(TM) Tool Holder and Miller WristBandit Tool Holder prevent workers from dropping tools at heights. Miller Bandit Lanyard Tool Holder attaches to workers' waist belts while allowing freedom of movement. It is constructed of stretchable cord surrounded by nylon tubular webbing, and stretches from 26 to 43 in. Miller WristBandit Tool Holder attaches to workers' wrists using Velcro.... Read More

Electrical Equipment & Systems, Portable Tools

Stripper/Cutters have cushioned handles.

November 8, 2001

With Klein-Kurve(TM) double-dipped handles, Model 11055 and 11057 are designed for stripping, cutting, looping, and gauging solid and stranded wire. Model 11055 is designed for 10 to 18 AWG solid and 12 to 20 AWG stranded wire; Model 11057 is designed for 20 to 30 AWG solid and 22 to 32 AWG stranded wire. Both cleanly shear 6-32 and 8-32 screws. Other features include serrated nose jaws and... Read More