Portable Tools

Machinery & Machining Tools, Portable Tools

Hydraulic Crimping Machine features programmable operation.

September 25, 2015

Designed for loose-piece, heavy gauge crimping, CT 65 employs parallel crimping action that delivers up to 16.9 tons for applications up to 750 MCM. Full-cycle mechanism maximizes crimp quality by ensuring dies close completely before they reopen, machine's ergonomic 15° tilt provides optimal viewing angle, and LED light enhances visibility of crimping area. Along with 3 programmable... Read More

Machinery & Machining Tools, Portable Tools

Ball Nose Milling Cutters produce homokinetic joints.

September 23, 2015

Suited for production of homokinetic joints of hardened steel, CPMill Ball Nose Milling Cutters feature 5 cutting edges and highly spiraled geometry that ensures optimal chip removal. Solid carbide cutters for pre-machining come in variety of diameters featuring optimized base substrate and coating. For easy changing of milling heads, units are equipped with CFS interface. High concentricity of... Read More

Mounting & Attaching Products, Portable Tools

Inflatable Shim supports up to 300 lb.

September 23, 2015

Spanning gaps from 3/32 to 2 ½ in., AirShim Inflatable Pry Bar and Leveling Tool allows single installer to position and hold items in place. Contractor-grade inflatable bag offers one-handed operation using squeeze pump and precise bleeder valve, letting user raise and lower to perfect alignments. With no-scuff cover, AirShim is suited for installing appliances, beams, cabinets, doors,... Read More

Electrical Equipment & Systems, Machinery & Machining Tools, Portable Tools

Multi-Material Cutter cuts tubing, tape, wire, and cable.

September 21, 2015

Featuring fully electric design, Model MMC71 is capable of cutting wide range of materials, including flat material up to 3.3 in. wide, tubing up to 3/16 in. OD, and wire up to 14 AWG stranded or 16 AWG solid. Programmable unit offers 10 fixed feed rates, 10 fixed cut rates, and storage for up to 99 batches and 10 kits. Material guides are adjustable for each application, and... Read More

Machinery & Machining Tools, Portable Tools

Magnetic Drilling Units are designed for heavy-duty applications.

September 15, 2015

Equipped with ACCUDRILL pressure indicator and material and thickness detector, ICECUT 100 (850 W, 600 rpm) and ICECUT 200 (300 and 600 rpm) promote safe and reliable use. ACCUDRILL safety amp meter in central control panel lets users optimize drilling operation productivity while preventing motor from overloading/overheating. Also included, material and thickness detector will not let drill... Read More

Machinery & Machining Tools, Optics & Photonics, Portable Tools

Solid Carbide Milling Cutters work on lightweight materials.

September 14, 2015

For machining thermoplastics, OptiMill-Thermoplastic has sharpened cutting edges and chip discharge-optimized geometry. Diamond-coated OptiMill-Thermoplastic-FR, for machining fiber-reinforced thermoplastics, cuts fibers without burr formation. For milling fiber composite parts, OptiMill-Composite-UD diamond-coated end milling cutter eliminates delaminations and fiber projections.... Read More

Machinery & Machining Tools, Portable Tools

Cordless Grinders utilize 18 V battery with 4 Ah capacity.

September 14, 2015

Available with ¼ in. or 6 mm chuck, ASC 9 Straight Grinder operates at speeds of 9,000 rpm and is suitable for work with non-woven brushes and flap wheels. ABC 7 Belt Grinder, operating at 7,000 rpm, can be fitted with 1/8, ¼, and ½ in. wide belts for applications with tight spaces. AKC 3 Fillet Weld Grinder features reduction gears and long aluminum neck for metalworking... Read More

Electrical Equipment & Systems, Machinery & Machining Tools, Portable Tools

Hand-Held Air-Operated Cutter from Eraser

September 9, 2015

Model MR30A from The Eraser Company is a Hand-Held Air-Operated Cutter.  This ergonomically designed tool uses 85 PSI air pressure and creates 617 lbs. of cutting force.  The MR30A is capable of cutting .130 copper, .110 steel and .047 piano wire.  Three blade types are available to provide end cuts, center cuts, or diagonal cuts. Also available for use with the MR30A is an optional... Read More

Fasteners & Hardware, Machinery & Machining Tools, Portable Tools

Blind Hole Taps machine stainless steels.

September 4, 2015

Designed for machining stainless steels and ISO M materials, TC142 Blind Hole Taps also have secondary application in ISO P materials, particularly in softer steels which require more chip control. Grade WW60RB, featuring wear-resistant coating, offers extended tool life and high cutting speeds for high-volume production. Grade WY80FC features vaporized surface that guarantees high level of... Read More

Machinery & Machining Tools, Portable Tools

Holemaking Tools are engineered for performance, durability.

September 4, 2015

Made from heavy-duty steel, holemaking products are engineered for optimized for life expectancy and performance. Bi-metal hole saws cut stainless steel, mile steel, drywall, ceiling tile, laminate, wood, and plastic. Double-fluted step drill bits have thick, extra-long, 3/8 in. hex shank that provides firm, positive grip in drill and won’t spin out. Also available, wood boring bits... Read More

Machinery & Machining Tools, Portable Tools

Die Grinders offer 3 in. or 6 in. shaft for extended reach.

September 4, 2015

Available with front or rear exhaust air motor, .4 Hp Extension Die Grinders run at 25,000 rpm and are suited for work within long pipes, castings, and other places where extended reach is needed. Straight-line air tools include safety-lock lever that prevents accidental start up. To minimize noise in workplace, tools run as low as 72 dB(A). Optional carbide burrs and mounted points enable... Read More

Machinery & Machining Tools, Material Handling & Storage, Portable Tools

Fastening Tools suit light industrial and MRO applications.

August 31, 2015

Machined from high-grade alloy steel and heat treated to provide non-brittle toughness, Apex Geta Tools are suited for construction, light industrial assembly, and general maintenance and repair applications. Line includes Torx®, Phillips, Square, Torq-Set, and Slotted insert and power screwdriver bits as well as magnetic bit holders, magnetic sockets, nutsetters, and extensions. Read More

Portable Tools

Customers Embrace Cascading Arc Technology Using Oerlikon Metco's SinplexPro Plasma Spray Gun

August 28, 2015

Winterthur, Switzerland — New SinplexPro spray gun appeals to a large customer base because it allows applicators to standardize coating parameters across multiple spray systems. Oerlikon Metco today reported brisk sales of its SinplexPro plasma spray gun and that the rate of adoption is increasing steadily. The SinplexPro spray gun, launched approximately two years ago, brings the benefits of... Read More

Portable Tools

Customers Embrace Cascading Arc Technology Using Oerlikon Metco's SinplexPro Plasma Spray Gun

August 27, 2015

Winterthur, Switzerland — New SinplexPro spray gun appeals to a large customer base because it allows applicators to standardize coating parameters across multiple spray systems. Oerlikon Metco today reported brisk sales of its SinplexPro plasma spray gun and that the rate of adoption is increasing steadily. The SinplexPro spray gun, launched approximately two years ago, brings the benefits of... Read More

Electrical Equipment & Systems, Portable Tools

EC&M Magazine Announces Klein® Tools Wins 2015 Product of the Year

August 27, 2015

Klein Tools’ All-Purpose Pliers Receives Accolades for Multi-Functional Design Lincolnshire, IL – Klein Tools (http://www.kleintools.com), for professionals since 1857, was awarded the 2015 Product of the Year award for its All-Purpose Pliers (Cat. No. J206-8C) by Electrical, Construction Maintenance Magazine. This product combines the functions of a... Read More

Electrical Equipment & Systems, Machinery & Machining Tools, Portable Tools

VPI Now Offering a Cutter & Stripper Tool for CAT5e Super Flat Shielded Cables

August 25, 2015

Aurora, OH: Video Products Inc today announced the addition of a Cutter & Stripper Tool for CAT5E Super Flat Shielded Cables to its popular line of network tools. The Cutter & Stripper Tool is ideal for cutting and removing jackets from VPI's CAT5e super flat shielded bulk cables. The STRIPPER-CAT-FLAT is a combo tool that can cut and strip cable jackets from VPI’s CAT5e super flat shielded... Read More

Fasteners & Hardware, Machinery & Machining Tools, Portable Tools

Spherical Ball Nose System provides indexable finishing inserts.

August 24, 2015

EDGE²® Spherical Ball Nose (SBN) inserts feature 2 usable cutting edges for optimal finish quality and thick carbide construction for heat and stress absorption. Insert life allows for extended, unattended finishing runs with quality surface finishes optimized by grinding process. Also suited for tip-cutting, 3D profiling, semi-finishing, and light roughing, fully... Read More

Electrical Equipment & Systems, Machinery & Machining Tools, Portable Tools

Hand Tools suit 3D printing applications.

August 20, 2015

Made from alloyed steel with non-slip rubber grips, Xuron® 3D Printer Hand Tools are used for removing support material from 3D print, trimming filament, and servicing printer. Model 170-II Micro-Shear® Flush Cutter produces clean, square cut using shear action and has glare-eliminating black finish for optimum visibility when cleaning up prints. For holding filament and removing post... Read More

Machinery & Machining Tools, Portable Tools

Grooving Tool offers optimized chip control, finish, longevity.

August 20, 2015

Used on turret turning centers, Swiss turn, and multi-spindle machines, internally cooled Walter Cut G1011-P comes in shank versions of 0.750 and 1.00 in. and features precision coolant delivered to both flank and chipbreaker of insert. Tool head length is suited for universal use and also promotes chip evacuation, while clamping forces are optimized due to screw position. With cutting... Read More

Material Handling & Storage, Portable Tools

Wrist Lanyards keep tools at hand and facilitate exchange.

August 12, 2015

Included within Objects at Heights collection, Squids® 3114 and 3116 Pull-On Wrist Lanyards tether ≤3 lb tools to limit drop distance, reduce snag/tangle hazards, and facilitate tool exchange. Connecting mechanisms include 304 stainless steel carabiner (3114) and modular buckle (3116). While pocket on both styles allows for tucking in carabiner or buckle when tool is not in use,... Read More