Eidos Corp.
Lincoln, NE 68529
Apr 08, 2004 Used on hard surface floors, SitStand consists of movable seat that adjusts from flat to 45° and swivels up to 180° off center. Ergonomic design with contoured padded seat reduces fatigue and lessens chance of back strain. Equipped with rear casters, product weighs 37 lb and employs gas spring actuated seat that adjusts in height from 24–36 in. Seat base at front is 21 in. wide, allowing worker to fit into narrow spaces to reach work surface.

Tri-Mer Corp.
Owosso, MI 48867
Apr 01, 2004 Suited for metal-working operations, Downdraft Workstation captures aluminum, magnesium, zirconium, beryllium, titanium, and other volatile dusts, as well as traditional ferrous metal dusts, with 99.5% efficiency at .5 microns. Available in steel, stainless steel, or polypropylene, workstations can include Whirl Wet™ dust collector. Ten standard sizes range from 1,200–6,000 cfm. Maximum work-surface capacity is 250 lb/ft².

Anthro Corp.
Tualatin, OR 97062 8591
Mar 24, 2004 Elevate™ Electric Lift Table raises and lowers via keypad control and is offered in 2 styles: single-surface, where desktop moves up and down, or dual-surface, where back and front surfaces move up and down independently. Each style comes in 48 or 60 in. width and can be placed at heights from 29–42 in. from ground. Features include control box, cable trough, 4 in. rhombus locking casters, 250 lb overall weight capacity, and 16 ga steel frame.

BioFit Engineered Products
Waterville, OH 43566 0109
Feb 26, 2004 Series AE features sculptured, contoured seat and ergonomic backrest with lumbar support. Upholstered with molded foam cushioning, seat is 21 x 19 x 3 in. and has waterfall front for circulation and reduced strain on lower legs. Internal seat board bumperguard helps resist wear. Backrest measures 15½ x 14½ in. and includes plastic protective panel. Control enables seated individual to adjust seat height, backrest tilt, and backrest height.

Clean Air Products
Minneapolis, MN 55445 1828
Feb 17, 2004 Rated for use in cleanrooms from Class 100,000 to Class 10, Series 61 Formica tables feature heavy-duty design for corrosion-resistant operation. Tabletop measures 1.125 in. deep and features solid wood core completely covered with high-pressure plastic laminate. Work surface, mounted on stainless steel support frame, has square tubular steel support legs and adjustable leg-leveling guide. Static dissipative models are also available.

Hodge Manufacturing Co., Inc.
Springfield, MA 01107
Feb 10, 2004 Constructed of steel and finished with powdercoat paint, customizable, ergonomic work benches are adjustable from 28–42 in. and have 2,000 lb capacity. Designs include 2- and 4-drawer pedestals, file drawers, and cabinet sections that may include louver panels and back and end stops. Tops are offered in steel, tempered hard board over steel, tempered laminated maple, laminated plastic, or shop top, all with cylinder locks and locking handles on cabinets.

Clean Air Products
Minneapolis, MN 55445 1828
Dec 23, 2003 Series 201 Horizontal Flow Clean Benches remove 99.99% of particulate contaminants 0.3 micron and larger. They feature wrap-around design with white Vinclad steel for resistance to abrasion, corrosion, stains, chemicals, and general wear. Cabinet maximizes usable work space, while assuring clean laminar airflow through work area by eliminating turbulence and back currents. HEPA filter is accessible from front of unit for easy maintenance.

Outwater Plastics Industries, Inc.
Wood-Ridge, NJ 07075
Nov 28, 2003 Pliable MDF Board allows furniture and cabinet makers, woodworkers, builders, and remodelers to produce all types of circular and undulating curves needed to create unusually shaped furniture, walls, and columns. Suitable for veneering, painting, or surfacing, board is smooth on one side. Panels measure 40 7/8 x 110 ¼ in. with thickness of 8 or 9.5 mm. They can be joined with dowels, cross tongues, or butt jointed to increase length or width.

Wright Line
Worcester, MA 01606
Nov 12, 2003 LCD Lift™ module, with release trigger, enables monitor to recede into desk, converting workstation into multi-purpose platform. Available for LINX® modular office furniture, it is compatible with 15-19 in. flat screens, including those featuring VESA FDMI mounting interface. Module provides safety and security for enclosed monitor. Applications include computer labs, education and training environments, lobby and reception areas, and personal workstations.

Lista International Corp.
Holliston, MA 01746
Oct 06, 2003 Adjustable-height Ergomation® products include choice of worksurfaces, foot styles, and dimensions. Modular Ergomation EDG® Series is offered in motorized, hand crank, and slide leg versions, while Ergomation M500 Series is offered in slide leg model. Ergomation 1-2-1 Universal Upright System provides vertical organization and structural support and is offered in single and double-bay, freestanding, or in-line configurations.

BioFit Engineered Products
Waterville, OH 43566 0109
Sep 22, 2003 Series MM Upholstered Chairs feature tall, wide backrest that conforms to natural curves of spine and provides lumbar support. Seat has waterfall front to aid in circulation and reduce strain on lower legs. Backrest’s plastic panel and seat’s internal bumperguard provide resistance to wear. Chairs are adjustable to meet individual needs and adapt to multiple users on shift operations.

Outwater Plastics Industries, Inc.
Wood-Ridge, NJ 07075
Sep 03, 2003 Ready-to-assemble drawers and drawer components are available in solid Beech, Birch plywood, and PVC wrapped particle board. All drawers come with ¼ in., color-matched, melamine drawer bottom. Able to be assembled without any woodworking skills, drawers are manufactured utilizing Chuck and Bore joinery with 12-step and 7-level polyester acrylic finish. Options include dovetail joinery and bottom prepared for concealed runners.

Penco Products, Inc.
Oaks, PA 19456 0378
Jul 22, 2003 Shop Desk features 34 in. wide x 30 in. deep tabletop, 19 x 19 x 5 in. drawer, and adjustable height ranging from 41 to 43½ in. Both tabletop and drawer are all-welded. Two side leg supports and center support that doubles as leg rest create stable work surface. Unit provides paper storage in upper compartments, and middle compartment is suitable for pens, tags, and smaller items. Built-in drawer lock with 2 keys included.

BioFit Engineered Products
Waterville, OH 43566 0109
Jul 14, 2003 BioFit GX Series sit/stands, for laboratory and shop workers, are stools with features of ergonomic chairs to allow semi-sitting position. Soft Touch pneumatic mechanism raises/lowers seat height. Contoured, ventilated, 13 x 13 in. seat has built-in handle for forward tilting and chemical-resistant skin. Models GX120 and GX150 have 5-legged tubular steel base with 23 in. leg spread and 20 in. dia fixed foot ring. Models GXT20 and GXT50 are equipped with 23 in. dia, trumpet-style base.

AliMed, Inc.
Dedham, MA 02026
Jun 20, 2003 Available with or without arms, VersaTech™ Comfort Chair is designed for workstations that are continually shared by several different-sized people. Seat cushions are constructed of heat- and pressure-sensitive T-Foam™ to conform to body shape, while fully padded backrest provides upper and lower lumbar support. Seat may be slid in or out to accommodate user's legs. Single-paddle adjustment changes seat and backrest angle.

ImageVision Inc.
La Grange, TX 78945
Jun 17, 2003 AgileVIEW™ supports LCD and gas-plasma flat screens positioned on single- or double-width units, up to 3 tiers high, with adjustable tilt and pivot monitor mounts. Factory-installed power and video cables are provided in integral wireways, which allow for separation of power and control wiring. Lockable cabinets below work surfaces are provided with slide-out style trays. Equipment sub-panels or 19 in. EIA racks are available.

Unidex
Warsaw, NY 14569
Jun 06, 2003 AHW Powr-Lift provides instant adjustments of working heights at up to 4 ips lifting speed to accommodate various work positioning requirements. Product incorporates air/oil hydraulic lift system and has lift stroke of 18 in. from 27–45 in. high (Model AHW2718) or 36 in. from 9.5–45.5 in. high (Model AHW9536). Able to function smoothly regardless of uneven weight distribution, unit offers blocking valve and one, 30 x 60 in., solid maple butcher-block work surface.

Stanley Works, The
New Britain, CT 06053
Apr 01, 2003 With 27 ½ x 20 in. work surface and 550 lb capacity, ZAG® Folding Workbench serves as workbench, vise, sawhorse, or storage solution. Unit is equipped with two adjustable vise clamps, molded-in ruler, drill holder, and built-in storage compartment and fastener organizer. It also includes rubber soles and tool storage bag with 13 different types of pockets, straps, and pouches that attaches to bottom half of unit for access when working on workbench.

Lyon Workspace Products
Aurora, IL 60507
Mar 12, 2003 Mobile Work Centers have flush-mounted doors with padlock hasp, spring-actuated pull handle, and 8 gauge welded hinge plates. Ten gauge steel top features 2 in. high back and end stops, and accommodates customer-supplied vise. Internal shelf offers capacity of 1,450 lb and is adjustable on 3 in. centers. Two full-width open shelves across back hold supplies. Two fixed and 2 swivel-braking, 8 in. dia roller bearing phenolic casters support total of 3,600 lb.

Production Basics, Inc.
Watertown, MA 02472
Mar 12, 2003 Binder Holder utilizes double swing arm to ergonomically position instructions and quality documentation that production operators use. Arm may be moved out of way when not in use. Measuring 12 in. wide and 9 in. tall, unit is constructed of 12-gauge steel and comes with 1 in. ring. It is suitable for use in assembly lines, laboratories, warehouses, shipping departments, and data entry stations.