Pro-Line
Haverhill, MA 01835
Apr 06, 2007 Pro-Line PB packaging workbenches feature lower shelf with 18 x 18 in. dividers, full width storage shelf with 4 in. clearance, bin holder, 6 outlet power strip, power spool holder, 12 in. deep metal shelf with four 4 in. dividers, and shop light. Modular units are height adjustable from 30-36 in., and are constructed of 16 ga steel. Featuring 750 or 1,000 lb capacity, line is available in plastic laminate, solid maple, or with ESD coating.

Lyon Workspace Products
Aurora, IL 60507
Mar 28, 2007 Providing 250 lb capacity, Sit-Stand Stools allow users to work in upright standing position with their weight partially supported on padded seat. Mechanism allows height adjustment by lifting front of seat and sliding it up or down to desire height, then pushing seat front down to relock in place. Designed to swivel 16° in either direction and return to center automatically, seat tilts forward 20° and is infinitely adjustable from 22¾-33¾ in. in height.

SKF Linear Motion & Precision Technologies
Olney, IL 62450
Feb 13, 2007 Controlled with desk, hand, or foot switches, SKF® TELESMART TMA/TMD series promote safe height adjustment for desks, tables, chairs, and industrial workstations. Type TMA pillars have 640 mm retracted length and 500 mm stroke, delivering push forces to 1,000 N at speeds to 55 mm/sec. With 550 mm retracted length and 700 mm stroke, Type TMD pillars achieve push forces to 800 N at speeds to 60 mm/sec. Dimensions of both types contribute to optimized workplace ergonomics.

Rehabco
Roanoke, VA 24014
Feb 08, 2007 Designed to provide rehabilitation for those who are non ambulatory due to age, illness, or trauma, LifeGlider 3000 helps patients with basic motions and therapeutic exercise. Product is suited for various treatments such as recovery from hip or knee surgery, cardiac and stroke rehabilitation, fall prevention therapy, arthritis therapy, and Alzheimer's exercise therapy.

Merritt, J. R., Controls, Inc.
Stratford, CT 06615
Jan 24, 2007 Designed to address operator ergonomics, FSMDSS System provides motorized control of armchair adjustments, such as console elevation, lateral motion, and tilt. Manual and motorized seat adjustments accommodate wide range of operator sizes. In some applications, armchair enables operators to sit while operating equipment, ensuring unobstructed view to perform work safely. Consoles can be equipped with joysticks, pushbuttons, and other operator devices.

IAC Industries
Brea, CA 92821 2926
Jan 03, 2007 Offering custom configurations, Workmaster(TM) Storage Cabinet Workbenches come in 60, 72, and 96 in. lengths with depths of 30 and 36 in. and overall heights of 33 and 36 in. Work surfaces include standard, ESD laminate, solid maple, or stainless steel. Supporting 1,000 lb distributed static load, benches offer 9 drawer configurations and drawer heights of 3, 6, and 12 in. Weight capacity is 100 lb per drawer using Accuride® full ball bearing, 95% extension drawer slides.

Source International, Inc.
Shrewsbury, MA 01545
Dec 19, 2006 Offering sophisticated interpretation of tech styling, Purl Chair emulates Aeron chair to make it suited for offices that desire refined image. Self-conforming back shape utilizes knit material that provides individual comfort regardless of size or shape of occupant. Offered in 11 colors, chair also features recessed arm rests that provide appropriate resting surface while allowing user to get closer to work surface.

Durham Manufacturing Company, The
Durham, CT 06422-2108
Dec 11, 2006 Equipped with stand-up writing surface and secure storage for files and records, mobile shop desk measures 23 x 20 x 51 in. Unit is all welded and fabricated of 16 gauge steel, and features shelf area fitted with pencil rest lip, 2 drawers mounted on ball bearing slides with recessed pull handles, and lower storage compartment with flush handle. Easy mobility is provided by four 3 in. rubber plug-in casters, supporting up to 500 lb.

Clean Air Products Clean Air Systems Div.
Minneapolis, MN 55445 1828
Nov 17, 2006 Perforated, stainless steel, Series 64 eliminates eddied and stagnant air pockets that are on or above work surface of solid-top tables. Continuous-top Series 64CT is made from single sheet of stainless steel that is perforated, forming smooth top. Holes are offered in nominal sizes of ¼, 3/8, and ¾ in. Perimeter frame Series 64PF is made with piece of perforated stainless steel with 1/8 in. diameter holes, spot welded to perimeter stainless steel frame.

Eagle MHC
Clayton, DE 19938
Nov 03, 2006 For Class 1-100,000 cleanroom operations, Eagle clean tables are constructed of type 304 18-8 stainless steel and feature stainless steel hat-channel framing. Solid or perforated tops are available, and electropolished finishes are offered on tables from 36-96 in. wide and 24, 30, or 36 in. deep. Also available, stationary and mobile open-wire worktables offer 62% laminar flow and have 800 lb load-bearing capacity. Flexible-height overshelves have posts numbered on 1 in. increments.

AliMed, Inc.
Dedham, MA 02026
Oct 31, 2006 Providing comfort and adjustability, ErgoGenesis Cleanroom and ESD Task Chairs feature wide contoured seat pan, optional adjustable arms with soft pads, and washable conductive fabric. They are precision built to meet strict requirements for Class 1, 10, and 100 ESDSTM 12.1-1997 standards.

Maxpro Technologies
Fairview, PA 16415
Oct 26, 2006 Measuring 24 in. x 48 in. x 18.5 ft, Hose Test Bench is equipped with 3 Maximator air-driven liquid pumps for operation at 100-400, 400-3,000, and 2,000-10,000 psi. It includes circular chart recorder with 3 pressure ranges as well as safety devices to prevent operation in any unsafe condition. Stainless steel test chamber measures 24 in. x 16 in. x 14 ft and is equipped with 3 separate opening doors, each with Lexan viewing window.

Lyon Workspace Products
Aurora, IL 60507
Oct 23, 2006 Measuring 30 x 28 ¼ x 59 ¼ in., Deluxe Computer Workstation features clear view monitor door that allows for visibility and protection of up to 21 in. monitor. Adjustable lower section provides storage for CPU, printer, and supplies. Able to supports loads to 200 lb, lower shelf rides on ball bearing slides and is adjustable on ¾ in. centers. Ergonomic keyboard shelf slides out and drops down for tension-free keystroking, and 53 ½ x 12 ½ rear access door opens completely.

Stanley Vidmar
Allentown, PA 18105 1151
Aug 21, 2006 Custom-designed Industrial Work Centers come with dual lock system that creates 2 sets of independently lockable drawers or doors in single cabinet housing. Users can choose from 3 housing heights, 2 housing widths, and 15 drawer heights. Centers are available with 1-5 full-width drawers on top, along with nearly any combination of drawers and cabinet doors below. Housings may be ordered with pallet bases, wheels, or stainless steel leveling feet.

Modular Tooling Systems
Royal Oak, MI 48073
Jul 31, 2006 Designed to promote neater work area and quick tool changes by providing means to keep track of inserts and tools, tool-changing bench features molded compartments for 6 sizes of inserts, Allen wrenches, and torque keys. It also includes bin for dull inserts. Each table measures 24 x 24 in. and can be bolted to floor next to each machine. Vertical panel holds printed instruction sheets for matching tooling inserts to proper machining operation.

AliMed, Inc.
Dedham, MA 02026
Jul 31, 2006 Neutral Posture Balance(TM) chair has 7 adjustable features including back and seat angle, seat tension and height, arm height and width, and arm pad positioning. Padded seat sits atop synchronous knee-tilt mechanism that has side-activated tension knob, multi-locking positioning, and anti-kickback and anti-rocking motion with free float to facilitate balancing. Foam and mesh back support structure adjusts to contours of user's back, and arm pads are topped with gelthane.

Clean Air Products Clean Air Systems Div.
Minneapolis, MN 55445 1828
Jul 19, 2006 Series 305 clean bench features stainless steel table top with white painted-steel shell, front access, and interior lighting, with models for Class 100 or Class 10 environments available. Table is 2-1/2 in. over nominal 3, 4, 5, 6, 8 increments x 21.5 x 30 in. standard. Overall cabinet width, depth, and height will depend on size of unit chosen. HEPA-filtered air flows outward from cabinet, and top and bottom front grills recirculate air and provide ±½°F temp control.

Durham Manufacturing Company, The
Durham, CT 06422-2108
Jul 10, 2006 Measuring 23 x 20 x 51 in., 16 gauge steel all welded construction mobile shop desk provides organized, movable work area with secure storage for files, records and supplies. Maneuverability is provided by four 5 x 1¼ in. bolt-on polyurethane casters, 2 swivel and 2 rigid. Desk also features sloped writing desk with pencil lip, 3 section open shelf area, and 2 ball bearing slide drawers over front storage cabinet. Drawers and cabinet have cylinder locks.

Durham Manufacturing Company, The
Durham, CT 06422-2108
Jun 09, 2006 All-welded, Extra Heavy-Duty Workbenches feature 3/16 in. thick steel top surface with smooth radiused edges. Angle iron legs are 2 x 2 x ¼ in. with 3 x 3 x ¼ in. footpads pre-drilled for floor lagging. Under-table angle iron reinforcements and 3/16 in. corner gussets disperse weight for optimal support. Fabricated of 12 gauge steel, lower shelf is rated at 500 lb capacity. Three models measure 30 x 48, 36 x 60, and 36 x 72 in. All are 34 in. high.

Stanley Vidmar
Allentown, PA 18105 1151
Jun 02, 2006 Built around modular drawer cabinet and laminate top, Shipping/Receiving Workbench can be tailored to suit customer. Set at 36½ in. high, top is 90 in. long, providing room for weighing, packing, and labeling. Drawer cabinet comes with roll-out shelf at top drawer position, providing additional surface for writing, packing, or staging, and can be locked in open position while in use. All drawers have 100% extension slides, and can be locked separately.