Automation Systems Interconnect Inc.
Mechanicsburg, PA 17055
Aug 25, 2009 Commonly used for Ethernet connections, RAP10-1-45CS and RAP6-45CS Through Panel Remote Access Interface Connectors provide means for passing RJ45 connector equipped with cable to inside of panel or piece of equipment without shutting down or opening door of equipment. Units come with hinged dust cover and can be equipped with protection components such as fuses and circuit breakers. With dust cover closed and latched, interfaces have IP67 rating, providing water-tight seal.

NCMT Ltd
Surrey KT7 0QJ  United Kingdom
Apr 13, 2009 T-Slot Clean covers aid in comprehensive removal of swarf from T-slots in machining area of mill or machining center to accelerate changeover to subsequent batch runs. Products also reduce inaccuracies due to chips causing misalignment when component is clamped. Pushed into T-slots over all areas of machine table where they are not being used to clamp fixtures, strips are retained by spring-loaded sides, slightly wider than slots, that prevent swarf and coolant ingress.

Leviton Manufacturing Co., Inc.
Melville, NY 11747
Feb 05, 2009 Constructed of cast aluminum, Single-Pole Panel Mount Receptacle Cover features self-closing lid that prevents incidental contact with energized conductor and protects enclosed device. Type 3R-rated lid contains foam gasket that seals out contaminants, debris, rain, dirt, snow, and sleet when cover is not in use. Available in 5 colors, cover accommodates 90° 17 and 19 Series male and female panel-mount receptacles and 22 and 23 Series female panel-mount receptacles of cam-type designs.

Hubbell Inc. (Delaware) / Wiring Device-Kellems Division
Milford, CT 06460
Dec 15, 2008 With 6 SKUs that cover almost every application, modular homeSELECT® While In Use weatherproof plastic covers offer snap on cover plate design for installation with either device or box mounting. Padlockable covers prevent tampering and feature polycarbonate construction.

Arsco Manufacturing Co
Cincinnati, OH 45247
Oct 06, 2008 Manufactured from 22 ga cold rolled steel, galvanized material, or stainless steel Arsco pipe covers conceal utility pipes and prevent direct contact with hot or cold piping systems in any commercial or residential environment. Covers are available in overhead styles for induction units and overhead pipes, and accommodate sprinkler devices. Manufactured to any size or configuration, pipe covers are available in 6 standard and unlimited custom colors.

A & A Manufacturing Co., Inc.
Fall River, MA 02722
Sep 22, 2008 Designed to protect machinery from oil, dirt, chips, and other contaminants, custom-engineered, Protective Bellows-Type Covers are available in way covers, photographic bellows, linear bearing way covers, ballscrew and rod covers, and die set shields. Units are suited for machine tools, robots, precision slides, automated handling equipment, and cameras, as well as medical, dental, and office machinery.

Safety Technology International
Waterford, MI 48327
Aug 05, 2008 Constructed of clear polycarbonate and open on the under side, Model STI-6528 Bopper Stopper protects standalone access control units, electrical outlets, digital keypads, pull stations, and push buttons against both vandalism and accidental damage. Measuring 3.55 x 4.15 x 2.37 in., cover comes complete with screws and gasket for ease of installation.

Medicus Health
Grand Rapids, MI 49508
Jul 10, 2008 Providing 24/7 keyboard protection in medical facilities, manufacturing plants, as well as other applications with high amounts of dust and dirt, Quick Ship Custom Protective Keyboard Covers and Screen Protectors can repel liquid spills, dust, dirt, blood, and other hazardous agents. Made from polyurethane, custom covers are also available for standard keyboards, laptops, or LCD screen.

Fortress Interlocks Ltd
Erlanger, KY 41018
Jul 09, 2008 Offered in standard and padlocked versions, Dustcovers fit over mGard industrial safety interlocks to prevent build up of dust and debris that could prevent internal mechanism from operating properly. Stainless steel products are spring-loaded and feature internal clamp that grips lock body. Designed to fit CL(S), ML(S), and BL(S) locks, covers can be mounted vertically or horizontally and offer polished front surface that provides room for text.

Coverall
Worcester, MA 01604
Jul 07, 2008 Made from polyester, Hospital Covers withstand temperatures over 200°F and can therefore be sanitized by autoclave process. Covers can be customized to any size or design, and can also incorporate various features such as Velcro, grommets, zippers, pockets, or elastic.

Caplugs
Buffalo, NY 14207
Jul 03, 2008 Used as protective cover for wide variety of fittings, pipe ends, or threaded connectors, tethered vinyl cap features tethered end that allows cap to hang freely from application when not in use. It features high gloss finish with smooth, contoured ends and smooth flat top. Cap does not tear when stretched, rip when slipped over sharp edges, or shred when forced over threaded fittings.

Transhield, Inc.
Elkhart, IN 46514
May 30, 2008 Suited for use on metals, machinery, large parts, and vehicles, Transhield custom-fit covers are made from Shrinkable Fabric(TM) and feature non-abrasive, cloth-like lining to protect finishes from damage. Breathable exterior fabric is waterproof and also serves to reduce condensation. Also incorporated, Adhesive Additive Delivery - Vapor Corrosion Inhibitor (AAD-VCI) system provides 100% protection from corrosion during transportation and storage.

Lanxess - Technical Rubber Products
Pittsburgh, PA 15275
May 16, 2008 THERBAN® C 3669 VP (36% ACN; 6% RDB; 95 Mooney viscosity) is offered as alternative to acrylonitrile-butadiene copolymers (NBR) rollers in fabrication of rubber roll coverings used in extreme environments. Soft printing roll cover option, made of THERBAN hydrogenated acrylonitrile-butadiene copolymer (HNBR), allows for development of compound formulation with high acceptance of plasticizer. It also contributes to symmetrical shape during roll cover fabrication.

Brookfield Engineering Laboratories, Inc.
Middleboro, MA 02346
May 01, 2008 Available for DV-I series, DV-II series, CAP series, DV-III series, YR-1, VTE series, and AST-300SY touch screen controller models, Protective Keypad Covers protect against dirt, scratches, spillage, and dust. Clear, flexible covers are suited for instruments with multiple users and for busy, high traffic work areas.

Huot Mfg. Co.
St. Paul, MN 55104-1701
Mar 13, 2008 Designed to minimize industrial espionage of CNC tooling, CNA Safety Tool Covers allow operator to select correct tooling while visitors or personnel are touring non-secured manufacturing areas. Covers also protect tooling from damage and keep staged tooling clean and ready for set-up. Available for tapers 30, 35, 40, 45, and 50 as well as HSK 63A and HSK 100A, covers are held in place with key hold slots molded in to base and shoulder bolts on ToolScoot®.

Fibox Enclosures
Glen Burnie, MD 21061
Mar 12, 2008 Available in 5 sizes ranging from 6 x 6 x 4 in. up to 14 x 12 x 7 in., ARCA enclosures are UL Listed, with larger sizes having NEMA ratings Type 4, 4X, 12, and 13. Sizes 12 x 10 in. and smaller are also rated NEMA Type 6 and 6P. Transparent screw and hinged covers offer overlapping design to protect formed-in-place polyurethane gasket. Mounting plates plus fixed and hinged inner panels are available in metal/non-metallic versions.

Kimberly-Clark Corp.
Roswell, GA 30076
Feb 26, 2008 Kimtech Science Bench Top Protector comes with polyethylene backing that creates effective fluid barrier while providing slip resistance. It has ability to resist harsh chemicals, quickly absorb spills, retain its strength when wet, and remain flat even after drying.

NLU Products
Draper, UT 84020
Feb 26, 2008 Custom-designed and precision cut for Apple's MAcBook Air notebook computer, BodyGuardz protector is optically clear and remains transparent without distorting notebook's dimension or design. Cover adheres by using water-based adhesive that holds it in place and can be removed when needed. Each BodyGuardz package includes one complete Macbook Air BodyGaurdz protector, application solution, and squeegee card.

EGS ELECTRICAL GROUP ? APPLETON
Rosemont, IL 60018
Feb 20, 2008 Made of red, epoxy powder-coated steel, fire and safety Outlet Boxes, Extension Rings, and Covers eliminate need for painting at job site. Boxes come in 4 in. and 4 11/16 in. square sizes, measuring 1 ½ in. and 2 1/8 in. deep, with welded or drawn construction to meet needs of commercial applications. Groundskeeper(TM) raised boss enables 3/8 in. ground screw to be threaded into box without contacting mounting surface. Standard flat ground tapped holes are also available.

Aries Electronics, Inc.
Bristol, PA 19007-6810
Nov 01, 2007 Constructed of black UL 94V-0 glass filled 4/6 Nylon, Series 680 programmable headers and covers are available with either plain (solid) or top-slot press-on covers. They feature 3/4 hard brass alloy pins, as well as tin pin plating, and offer 50-150 m minimum matte tin per ASTM B545-97 over 50 m nickel plating per SAE-AMS-QQ-N-290. With current rating of 1 A, units have operating temperature of 221°F. Products can be mounted in PCB hole size of 0.032 ± 0.002 in. in dia.