ILLUMINUP    San Jacinto, CA 92583
Jun 29, 2011 Constructed from 100% recyclable polypropylene, Universal Multi-Purpose Lite Mat incorporates SunStruck LED technology. Mat measures 36.5 x 15.75 in. with 2.5 in. beveled edges all around and dovetail design that holds 96 LEDs in place. Applications range from work light for mechanics to patio lighting and outdoor welcome mat.

My Ladder Hand, LLC    Owensboro, KY 42303
Jun 22, 2011 Installed by hooking onto ladder rungs, My Ladder Hand provides 11 x 14 in. shelf on which to hold tools, materials, and supplies. Safety is increased by permitting OSHA-recommended 3-point-of-contact climbing and eliminating need to hold and balance working tools. Shelf also helps prevent dropped tools and eliminates need for multiple trips up/down ladder to retrieve tools. Ladder compatibility includes commercial extension ladders, multi-purpose ladders, small step ladders, and more.

Stakrak Ltd    West Sussex RH11 9SH  United Kingdom
Jun 22, 2011 Industrial workbenches are built to accommodate needs of flexible production and assembly environments in technical and electronics manufacturing. Ergonomic and modular workbenches are height-adjustable to promote operator comfort and productivity. Comprised of epoxy-coated, steel frame finished in mid-grey RAL7045, main structure is combined with worktops made from 25 mm particle board that is laminated on all sides. Several variants are available to accommodate requirements.

Revolabs, Inc.    Maynard, MA 01754
Jun 09, 2011 Designed for small- to mid-sized conference rooms, executive offices, and SoHo environments, Revolabs FLX(TM) features 128-bit encryption and support for both analog and IP. Microphone and speaker support wide band audio ranging from 80-11,000 Hz. Variety of microphones are available to match caller's needs, including lapel microphone worn by 1 person, omni-directional tabletop microphone for 6-10 participants, and directional tabletop microphone that enables audio capture from 2-3 people.

ZaGO    Newark, NJ 07114
May 26, 2011 Regardless of rocker switch size or configuration, crystal clear rocker switch boots cover top of switch and also penetrate enclosure to eliminate need for special cut-out. This custom sealing solution helps prevent even sealed rocker switches exposed to harsh environments from getting gummed in areas that threaten exposure to dirt, salt, and oil. Using this product, any standard switch may be converted into completely sealed switch.

Newport Corporation    Irvine, CA 92606
May 25, 2011 Laser µFAB tabletop laser microfabrication workstation is designed for use in both additive and subtractive processes. It can be configured for use with femtosecond laser oscillators, amplifiers, OPAs, and other types of lasers in visible to NIR range. Integrating precision stages covering 100 mm in X and Y axes and 4.8 mm in Z axis, with resolution of 50 nm, workstation also has top plate with holder that accommodates slides, cover slips, wafers, or large samples.

VarTech Systems, Inc.    Baton Rouge, LA 70809
May 20, 2011 Comprised of computer workstation integrated with Type X purge and pressurization protection system, VTPC950W suits classified areas such as Class 1 Div 1 Groups B/C/D and Class 2 Div 1 groups E/F/G. Powered by 2.30 GHz Intel® Pentium® Core(TM) 2 Duo T4500 CPU, system is constructed of 316 stainless steel and comes with intrinsically safe keyboard and 19 in. SXGA color LCD. In addition to facilitating setup and operation, screen displays information such as flow, pressure, and system status.

Mettler Toledo, Inc.    Columbus, OH 43240
May 19, 2011 Requiring minimal or no training, OptiMax(TM) fosters pharmaceutical, fine-chemical, and specialty-chemical development. Design and interface optimize organic synthesis process and time-to-result. Experiments can be run from -40 to +180°C, without oil or ice baths or cryostats, while careful tracking produces quality data. Offering one platform for product and process development, system delivers data recording and reporting capabilities that contribute to traceability and reproducibility.

Crown Mats & Matting Div., Ludlow Composites Corp.    Fremont, OH 43420
May 18, 2011 Made from recycled, post-consumer materials molded to reinforced, rubber/nitrate non-skid backing, EcoPlus(TM) entry matting systems are crush-resistant and feature reinforced patterns that tolerate aggressive scraping action and raised edging to retain soil and moisture. They are suitable for use in heavy traffic areas such as office buildings, hotels, and malls.

Hammond Manufacturing Co., Inc.    Cheektowaga, NY 14225
May 17, 2011 Constructed with fully welded frame, HME Series supports industrial controls, operator interface equipment, switches, and circuit breakers. Series includes HME single door version in 43 sizes from 1,400 x 600 x 500 mm to 2,200 x 1,000 x 600 mm; 36 HMET double door units ranging from 1,400 x 1,200 x 500 mm to 2,200 x 1,200 x 600 mm; and 23 HFMD single door and HFMDT double door flange disconnect versions sized from 1,400 x 800 x 500 mm to 2,200 x 1,000 x 500 mm to accept disconnect switches.

Safety Technology International    Waterford, MI 48327
May 12, 2011 Molded from polycarbonate material, supervised cover with sound (STI-6517S) or with sound and wireless transmitter (STI-6517SW) mounts directly into STI Stopper® Station series pushbuttons. When STI-6517S is lifted to gain access to button, selectable 65 or 85 dB alert sounds. When STI-6517SW is lifted, selectable alert sounds and wireless signal is sent to receiver, which subsequently beeps and flashes to indicate that site has been triggered.

Tiffin Metal Products Co.    Tiffin, OH 44883
May 12, 2011 Constructed with double-walled doors and 14 gauge, stainless steel continuous hinges, Sentinel® Infinity Locker has ventilation on top and bottom of frame and within drawer units. Locker offers adjustable shelves and variety of interior component kits that allow end user to create configurations to fit personal needs. Unit is also available with 3-point slam-latch locking system using combination locks, padlock hasp, or keyed locks with master override.

Safety Technology International    Waterford, MI 48327
May 05, 2011 Universal Stopper®, model STI-13420CY, delivers protection against physical damage, dust, and grime, for devices such as dual action pull stations, keypads for entry systems, intercom stations, and emergency buttons. Constructed of polycarbonate, indoor/outdoor cover is clear and features yellow message hood, horn, enclosed backbox, sealed mounting plate, and custom label. Available with surface or flush mounting options, cover is designed to comply with ADA and is less than 4 in. deep.

Detex Corp.    New Braunfels, TX 78130
May 05, 2011 Built for maximum strength, 230X Door Lock features heavy-duty, 3-bolt construction for resistance against attempted intrusion. Design puts more deadbolt deeper into frame than typical products, and connecting rods are made of continuous solid metal. Suited for back doors requiring both panic hardware and high-level protection from break-ins, multi-point lock accommodates needs of commercial properties and complies with life safety and code requirements.

Bradley Corp.    Menomonee Falls, WI 53051
Apr 25, 2011 Customizable pre-fabricated system, OmniDeck 4000 Series includes bowl, faucet, drain fittings, thermostatic mixing valves, trap covers and mounting brackets. Bowls and decks are GREENGUARD(TM) certified. Undermount bowl design eliminates unsightly gaps and crevices between deck and bowl, thereby restricting mold and bacteria growth.

Round, David, & Son, Inc.    Streetsboro, OH 44241
Apr 22, 2011 Designed for use within controlled environments found in pharmaceutical manufacturing, Ruger Industries all-stainless steel lift tables feature protected hydraulics and polished finish to facilitate wash-downs. External surfaces are entirely paint-free, meeting mandates of many drug makers for clean room equipment. While providing ergonomic benefits, tables come in capacities up to 2,000 lb and have respective raised and lowered heights of 42 and 18 in.

VEROTEC Inc    Londonderry, NH 03053
Apr 19, 2011 Designed to accommodate electronic, electric, and electro-mechanical equipment, Veroshield Rack Case comes in 3 sizes: 1U high x 10.4 in. deep, 2U high x 14.4 in. deep, and 3U high x 14.4 in. deep. Typical attenuation figures are in excess of 110 dB up to 10 MHz, falling linearly to 40 dB at 1 GHz. Constructed from 0.9 mm zinc-plated steel, case maintains electrical conductivity throughout. Additional 19" aluminum front panel, external to screened enclosure, is provided to optimize appearance.

Berner International Corp.    New Castle, PA 16101
Apr 19, 2011 With flush-mounted design with Intelliswitch 2(TM) digital controller and Pro-V Nozzle, In-Ceiling Mount provides environmental separation and energy conservation in commercial front entrances and lobbies with pedestrian entrances from 8-10 ft high and 3-12 ft wide. Product also minimizes insect and vehicle emission infiltration while also using Venturi effect to heat discharge air without affecting laminar airflow critical for creating complete doorway air coverage.

Hammond Manufacturing Co., Inc.    Cheektowaga, NY 14225
Apr 14, 2011 Available in 10 sizes from 6 x 4 in. to 16 x 14 in., Eclipse Junior (EJ Series) enclosures are offered in corrosion-resistant 316 Grade stainless steel to accommodate installation in aggressive chemical areas. Series is approved to UL 508 Type 3R/4/4X/12/13 and CSA Type 3R/4/4X/12/13. While formed lip around door aperture prevents liquid ingress, continuous foam gasket provides seal, and open/close quarter turn latching system secures door.

EIC Solutions, Inc.    Warminster, PA 18974-1157
Apr 14, 2011 Available with integrated 200, 400, 800, or 1,500 BTU thermoelectric air conditioner, wall-mount Protector(TM) Series safely and securely house fire panels used by contractors and builders in apartment complexes and industrial parks. Electrical equipment enclosures, also suitable for pole or floor mounting, are available in various materials as well as with locking latches, view windows, surge protectors, insulation, and visual or audible temperature alarms.