Plant Furnishings & Accessories

Plant Furnishings & Accessories

Absorbent Mats increase safety in high-traffic areas.

February 26, 2015

With tacky underside, SPC Adhesive Mat can adhere to and be removed from walkways. SPC High Visibility Barrier-Backed Mat, which combines caution printing, absorbency, and durability, draws attention to high-risk areas. Intended for general use, SPC High Traffic (HT) Barrier-Backed Mat blends absorbency with subtle safety messaging. All 3 mat versions help prevent slips, trips, and falls and are designed to prevent tearing beneath foot and forklift traffic. Read More

Plant Furnishings & Accessories

Operable Hollow Metal Doors offer STC ratings from 32-55.

February 18, 2015

Ceco Door Sound-Tech Xpress Systems and Curries 757 Quiet Noise Door Series are available with sound deadening technology that enables Sound Transmission Classification (STC) ratings from 32–55 in single flush, temperature rise, glazed, and embossed panel doors as well as flush and glazed pairs. Supplied with seals, ADA-compliant thresholds, and door bottoms, to meet STC label on door, products have been tested to ASTM E90, ASTM E1332, and ASTM E413 and carry 3 hr max fire rating. Read More

Communication Systems & Equipment, Plant Furnishings & Accessories, Software

Conferencing Equipment enhances collaboration.

February 17, 2015

Unified communications and group collaboration solution, Crestron RL™ 2, brings Crestron DigitalMedia™ and Microsoft® Lync® software into one device in order to bring Lync experience from desktop to conference room. Lync-based system enables video, voice, interactive content sharing, presence, and chat from one touchscreen interface, and codec can switch between VGA, HDMI®, and DM® sources without separate switcher. Solution mounts beneath table or behind display on wall mount. Read More

Plant Furnishings & Accessories, Electronic Components & Devices

NEMA 4X Plastic Enclosure suits outdoor applications.

February 16, 2015

Molded in light gray, UV-stabilized polycarbonate and UL Listed to 508A, Type 1, 2, 4, 4X, 12, and 13 specifications, 4.50 x 4.50 x 2.44 in. ML-44F houses electronics that may be subjected to harsh environmental conditions. Features include silicone gasket seal, UL94V-0 flame rating, molded on flanges, plastic PCB mounting bosses, and stainless steel screws. Along with clear cover option, available accessories include internal mounting panels and watertight cable glands. Read More

Plant Furnishings & Accessories, Electronic Components & Devices

DIN Rail Mounting Enclosures feature customizable design.

February 10, 2015

Manufactured using UL94 V0 flame retardant PC/ABS material and available from 2–12 modules wide, Modulbox XTS features 53 mm height and meets requirements of DIN standard 43880. Modulbox XTS Compact is similar to Modulbox XTS enclosure, but is 32 mm in height. Both come in 3 main types. Type A has 2-step shape, while Type B has 2 steps on one side of box and high side on opposing side. For increased internal volume, Type C features high sides on both sides of box. Read More

Plant Furnishings & Accessories

Riser Pipe Lids feature damage-resistant design.

February 9, 2015

Made of resin-infused fiberglass for durability and breaking strengths in excess of 20,000 lb, DuraFiber™ Lids fit most ribbed PVC and HDPE riser pipe. Units feature flat-style flange, allowing flush-to-grade installation; cored centering ring, providing snug fit; and urethane gasket to help ensure watertight seal. Available in 24 and 30 in. diameters, DuraFiber Lids have non-skid surface with customizable center insert, along with molded-in Caution statement. Read More

Plant Furnishings & Accessories

Clear Safety Covers secure access to button controls.

February 3, 2015

Featuring low-profile, unobtrusive design, Twist and Secure™ Push Button and E-Stop Safety Covers temporarily prevent access to machine start and engaged emergency stop buttons for production and facility utility operating equipment. Units are available in 4 combinations of removable cover and permanently mounted base to fit standard 16, 22, and 30 mm pushbutton stem diameters on control panels. Bases require one-time installation that then allows workers to twist safety cover into place. Read More

Material Handling & Storage, Plant Furnishings & Accessories

Computer Cabinets and Tables feature ruggedized design.

January 23, 2015

Ventilated and supplied with several 10 A power outlets, Acticomputer Units are made of hard-wearing, powder-coated steel to handle bumps and knocks when operating close to machinery and manual operations. Cabinets and tables also withstand mild chemicals, heat, steam, cold, humidity, and vibration. Available in 2 sizes to suit 14 in. and 21 in. computer monitors, units include locking systems that keep hard drives, monitors, and keyboards securely stored when not in use. Read More

Plant Furnishings & Accessories

Contemporary Door System creates open spaces.

January 21, 2015

Comprising folding, multi slide, and swing door systems, Contemporary Clad design helps create open spaces in residences and businesses. Material option features 2 15/16 in. narrow stile and rail profile to maximize glass and light. With 2 ¼ in. thick panels made of LVL core construction and extruded aluminum, system promotes thermal performance (to meet energy code demands) and structural integrity while minimizing exterior maintenance requirements. Read More

Material Handling & Storage, Plant Furnishings & Accessories, Electronic Components & Devices

Rack Enclosure Cabinets features sideways-mounted design.

January 19, 2015

Offering 500 lb capacity, SmartRack® SRW12UHD and SRW18UHD save space by extending only 24 in. off wall. Locking front and rear doors plus side panel allow access to IT equipment while still keeping it secure. Dual-rail mounting design supports equipment mounting via square and 12-24 threaded holes. Fully vented top optimize air flow, cabinets accommodate all standard 19 in. rack equipment and are suited for network/wiring closets, back offices, and branch offices. Read More

Plant Furnishings & Accessories

Steel Enclosures protect electrical controls and instruments.

January 16, 2015

Available in carbon steel, galvannealed steel, and 304 stainless steel, Series CSE-N1, CSE-KN, CSE-3R, and SSE come in sizes ranging from 10 x 8 x 4 in. to 36 x 30 x 8 in. Wall-mounted units are offered in water-tight and dust-tight versions with optional drip shields and optional keyed locks to keep important instrumentation safe. In addition, sub-panels and mounting straps/feet make installation convenient. Read More

Plant Furnishings & Accessories, Materials & Material Processing

Hand-Piece and Work-Stand meet high thermal demands.

January 8, 2015

Used with MX Series power supplies, MX-HPDC Dual Cartridge Hand-Piece with MX-WHPDC Work-Stand meet high thermal demands of conduction soldering. Applications include microwave shields, heavy block type housing and tabbing, preheat applications, BGA removal, cell phone shields, and industrial lugs and leads that require additional thermal energy during critical phases of flux activation and intermetallic bond formation. Five SMTC dual-shaft cartridges are available in 2 temperature series. Read More

Material Handling & Storage, Plant Furnishings & Accessories

Cabinet System protects equipment during severe earthquakes.

December 29, 2014

Engineered to protect and store network equipment in seismically active areas, Z4-Series SeismicFrame® Cabinet System features 1,500 lb seismic equipment load with additional 100 lb top load for cabling per GR-63-CORE testing. Unit comes in multiple size options, including 600 and 800 mm, as well as 1,200 mm deep model with narrow width. Features include factory-installed transport casters, recessed leveling feet, and floor anchorage to eliminate need for secondary bracing. Read More

Material Handling & Storage, Plant Furnishings & Accessories

Portable Pipe Stand can be carried to where cutting is needed.

December 19, 2014

Equipped with chain vise, PipeBench 170 firmly holds 0.6–6.7 in. dia pipe and provides proper support during such cutting operations as creating thread or welding. Maximum load capacity is 441 lb, and standard features include worktable and chip tray to catch sawing or threading chips. Weighing 22.5 lb, stand also comes with shoulder bag to facilitate portability. Read More

Plant Furnishings & Accessories, Fasteners & Hardware

Electronic Rotary Latch can accommodate door sensing.

December 19, 2014

Combining rotary latch mechanism with DC motor actuation, R4-EM 8 Series comes with or without extended housing option to accommodate door sensing and to provide added protection of locking cam. Additionally, latch is available with integrated connector and mechanical override bracket, and features concealed 2-hole installation. Unit enables simplified electronic locking and monitoring for applications that incorporate intelligent electronic control systems. Read More

Safety & Security Equipment, Plant Furnishings & Accessories

Suspension Relief Ladder helps fall victims awaiting rescue.

December 11, 2014

When worker slips while wearing fall protection, Suspension Relief Ladder can help delay onset of suspension trauma by keeping blood actively circulating. Ladder comes packed into Velcro-closed wrap. When worker falls, he/she deploys ladder, which is independently attached to harness's D-ring. Worker then places feet into webbing rungs and leans back, bringing legs into more horizontal position. After use, ladder can be re-packed and re-used. Read More

Plant Furnishings & Accessories

Ergonomic Rotating Circular Workstation offers adjustable height.

November 25, 2014

Intended for close engine assembly/work or complex mechanical assembly tasks, workstation features 36 in. dia, manually locking, rotating, height-adjustable tabletop that spins with up to 1000 lb loads. Hand crank-operated micro hydraulic lift affords height adjustments from 30–38 in. to allow sitting/standing; additional heights of 42 or 46 in. are available. Locking urethane casters enable portability, and ergonomic base cutouts allow operator to get close to work without interference. Read More

Plant Furnishings & Accessories, Electrical Equipment & Systems, Mechanical Power Transmission

Customizable Terminal Enclosure is offered in unsealed version.

November 24, 2014

While designed for desktop use, UNIDESK unsealed sloping front terminal enclosures can also be wall mounted. Ergonomic aluminum instrument enclosures, supplied pre-assembled, feature recessed front panel for membrane keypad, pre-punched PCB fixing points in base, and flat rear wall for installing switches, connectors, power inlets, and cable glands. In addition to light gray and black colors, 3 sizes are available: 7.87 x 7.87 x 4.02 in., 11.81 x 7.87 x 4.02 in., and 15.74 x 7.87 x 4.02 in. Read More

Plant Furnishings & Accessories

Equipment Enclosures withstand ultra-cold environments.

November 19, 2014

Designed to protect field-based process instrumentation, Diabox 277 Outdoor Enclosure measures 23.6 x 29.5 x 23.6 in. with 9.8 ft³ internal volume and wall thickness of 0.23 in. Continuous double seal comprises mechanical tongue and groove plus flexible silicon insert strip. For protection against extremely cold conditions, Arctic version withstands temperatures as low as -75°F. Unit is constructed with glass reinforced polyester outer walls and closed-cell polyurethane foam core. Read More

Plant Furnishings & Accessories

Nitrile Rubber ESD Workstation Mats are cleanroom packaged.

November 17, 2014

Ultrasonically cleaned, dried, and packaged in Class 1000 controlled environment, Clean Packaged Statfree UC™ nitrile rubber ESD mats feature dissipation top surface of 1 x 106 to < 1 x 109 Ω Rtt. Double bagging controls contamination of contents before being transferred to cleanroom, and several mat sizes are available: 16 x 24 in. (66310), 24 x 36 in. (66311), 24 x 48 in. (66312), 24 x 60 in. (66313) and 24 x 72 in. (66314). Read More