Urethane Paints & Primers

Paints & Coatings, Chemical Processing & Waste Management

Autodeposition Coating suits iron castings and ferrous metals.

February 18, 2014

Formulated to deliver uniform, defect-free surface coating on both inside and outside of complex components, Bonderite® M-PP 930C™ provides corrosion and abrasion resistance, thermal stability, and edge protection. Water-based, epoxy-acrylic urethane coating will coat any surface it wets during immersion of parts with no limitation as to part size, shape, or density. Non-flammable, non-explosive, and RoHS-compliant, coating contains no toxic heavy metals, very low VOCs, and no APEs or HAPs. Read More

Paints & Coatings, Chemical Processing & Waste Management

Urethane Coating provides high temp corrosion resistance.

October 16, 2013

Applied in 4.0 mil wet film thickness that dries to 2.0 mils, Corr-Paint™ CP2010 provides corrosion resistance on copper and steel components and structures exposed to oxidation and corrosive atmospheres up to 400°F. Single-part, aluminum-rich formula dries and cures at room temperature to hard, non-porous, abrasion-resistant surface. With viscosity of 300-600 cP and specific gravity of 1.08 g/cc, product is also resistant to wide range of acids, bases, fuels, and solvents. Read More

Paints & Coatings, Chemical Processing & Waste Management, Green & Clean, Architectural and Civil Engineering Products

Sustainable Urethane Floor Coating uses 50% soy plant content.

May 31, 2012

Made using 95% plant-based BiOH® polyol, Eco-ITS(TM) bio-based urethane floor coverings are designed to protect floors in manufacturing, industrial, and warehousing facilities. Sustainable coating application improves productivity and minimizes shutdowns. Available in clear or various colors with gloss or satin finish, product offers 21 g/L VOCs (clear) and 23-46 g/L VOCs (color) and qualifies for multiple LEED® credits. Read More

Paints & Coatings, Chemical Processing & Waste Management, Architectural and Civil Engineering Products

Urethane Floor Coating meets USDA/FDA standards.

April 16, 2012

Available in multiple colors and several grades with varying textures and thicknesses, URelle(TM)-Crete protects concrete against mechanical abuse and heavy traffic, as well as extreme conditions such as thermal shock associated with hot water discharge. Three-component urethane cement system, offering resistance to wide range of cleaning and processing chemicals, is suited for pharmaceutical and food/beverage applications. Read More

Paints & Coatings, Chemical Processing & Waste Management, Green & Clean, Architectural and Civil Engineering Products

Urethane Floor Coating resists wide range of chemicals.

February 15, 2012

Designed to withstand excessive physical impact, thermal shock, and chemical exposure, URelle(TM)-Crete is suited for pharmaceutical and food/beverage facilities. Three-component urethane cement system protects concrete against mechanical abuse and heavy traffic. Available in multiple colors and several grades with varying textures and thicknesses, URelle(TM)-Crete meets USDA/FDA standards, and is suitable for exposure to wet processing and steam cleaning. Read More

Paints & Coatings, Chemical Processing & Waste Management

Low-VOC Moisture-Cure Urethane Coating is chemical resistant.

January 14, 2010

With low temperature cure at 20ºF and application in conditions up to 85% relative humidity, Cor-Cote HB Urethane provides 4 hr return to service and can be applied on concrete, as well as steel substrates. Reinforced with micaceous iron oxide, it delivers high abrasion resistance, film integrity, and edge retention qualities. Product is suited for municipal and industrial wastewater treatment facilities, including clarifiers, settling tanks, wet wells, and grit chambers. Read More

Paints & Coatings, Chemical Processing & Waste Management

Urethane Coating targets exterior applications.

May 13, 2008

Two-component, high-gloss Envirothane® 550 is suited for industrial and commercial applications requiring color retention as well as UV, chemical, abrasion, and moisture resistance. Product is available in 22 standard colors, including 5 safety colors. Read More

Paints & Coatings, Chemical Processing & Waste Management

Urethane Topcoats meet stringent VOC requirements.

March 13, 2008

With VOCs below 250 g/L, WearGuard - CRU(TM) 250 Topcoats meet VOC requirements of LADCO, OTC, and Chemicals Control Branch of Environment Canada. Products offer UV light stability, light reflectivity, and ability to withstand Skydrol®, jet fuels, and other industrial chemicals. Available in white, light gray, and gray, coatings come in 100% aliphatic, non-yellowing formula to maintain appearance over time. Read More

Paints & Coatings, Chemical Processing & Waste Management

Clear Urethane Coating is ANSI/ESD-S20.20 compliant.

November 21, 2007

Licron Crystal(TM) is permanent static dissipative coating that adheres to metal and plastic surfaces, operates from 0-100% humidity, and maintains 107-109 W resistivity. It can convert standard bumpers, bins, tools, and other surfaces into ESD-safe products. Applications include electronic assembly work stations, bins, carts, and trays, packaging for sensitive components, production conveyors and bumpers, and static protection for electronic devices. Read More

Paints & Coatings, Chemical Processing & Waste Management

Urethane Mortars protect floors from harsh conditions.

October 11, 2007

Applied by roller, MORTARTHANE(TM) SL is self-leveling, durable floor topping that withstands repeated exposure to hot oil or steam without pitting or cracking. It is packaged in premeasured components in 5 gal unit covering 32 sq ft at 3/16 in. deep. MORTARTHANE(TM) HF is trowel-applied and packaged in 5 gal units covering 18 sq ft at ¼ in. deep. Both thermal shock-resistant resurfacers meet USDA, FDA, and OSHA standards. Read More

Paints & Coatings, Chemical Processing & Waste Management

Coating withstands extreme exterior exposures.

October 9, 2007

Providing lasting color and gloss retention, FluoroKem Fluoropolymer Urethane Finish is graffiti, chemical, and abrasion resistant, and meets AWWA performance standards. Product has VOCs less than 340 g/l and can be applied by brush, roll, or spray to primed steel, galvanized steel, or aluminum. Applications include convention centers, water tanks, casinos, and other highly visible areas. Read More

Paints & Coatings, Chemical Processing & Waste Management, Architectural and Civil Engineering Products

Floor Coatings offer thermal and UV protection.

March 16, 2007

Addressing needs within food and beverage plants, Eco-CWO minimizes odors and food borne illnesses caused by bacterial growth. One-coat, seamless coating provides resistance to thermal shock, chemicals, and slips. Water-borne urethane is virtually odor-free and contains no VOCs. Offering UV light resistance, Eco-URE epoxy coating can be used to prime, build, or topcoat flake or quartz flooring. It is suited for automotive showrooms, retail aisles and lobbies, and education classrooms. Read More

Paints & Coatings, Chemical Processing & Waste Management, Architectural and Civil Engineering Products

Urethane Floor Coating achieves low VOC safety.

February 22, 2007

Combining chemical resistance and UV stability, CRU-340 features mixed VOC of less than 340 g/L, making it compliant in all OTC states. High-gloss formula provides UV light resistance as well as abrasion resistance, critical for high-traffic flooring. Available in clear or pigmented finish, coating is suited for new and existing concrete floors in industrial, aviation, institutional, and commercial operations. It allows for recoat in 12 hr and light foot traffic in 24 hr. Read More

Paints & Coatings, Chemical Processing & Waste Management

Urethane Coatings are available with tint bases.

June 15, 2006

Corothane® I Moisture Cure Coatings can be matched to wide range of colors in large and small batches. They include topcoats and zinc-rich primers that are designed for temperatures down to 20°F or high humidity applications. Providing abrasion and chemical resistance, single-component, VOC-compliant coatings are suitable for water tanks, clarifiers, and secondary containment. Read More

Paints & Coatings, Chemical Processing & Waste Management, Architectural and Civil Engineering Products

Concrete Coating tolerates harsh industrial environments.

January 18, 2006

Thermakrete(TM) urethane coating shields industrial floors against thermal shock in -10 to +240°F temperature range. Capable of seamlessly expanding and contracting to resist cracking, it withstands caustic washdowns, heavy traffic, abrasion, chemicals, and standing water contamination. Each 3-component kit cures in less than 72 hr without need for primer or sealers. Available in 3/16 or ¼ in. thicknesses, it can be used in USDA facilities based on FSIS Directive 11,000.4. Read More

Adhesives & Sealants, Paints & Coatings, Materials & Material Processing

Flame Retardant Compounds suit encapsulating and potting.

August 30, 2005

Non-shrinking castable liquid, Cable Cast FR urethane encapsulates, insulates, and provides strain relief for electrical connectors and cables. Because it forms flexible jacket with abrasion, tear, and puncture resistance, it can also repair power cable jackets and insulation. Intended for potting aerospace inserts, clear-drying 5 Minute® Epoxy FR adhesive/encapsulant paste fills gaps and bonds rigid substrates such as metals, glass, ceramics, concrete, and wood. Read More

Paints & Coatings, Chemical Processing & Waste Management

Water-Based Urethane Coating resists yellowing.

June 8, 2005

HYDROGLOSS(TM) Single-Component Urethane Coating is formulated to provide high-gloss finish with interior and exterior color and gloss retention. It is ready to brush, roll, or spray without adding and mixing additional components. With VOC content of 250 g/l, low odor formulation is recommended for water tanks, power plants, amusement parks, bridge and highway construction, and for corporate logos and petrochemical plants. Read More

Adhesives & Sealants, Paints & Coatings, Materials & Material Processing

Urethane Patch Kit quickly repairs concrete.

July 22, 2003

ARMORSEAL® ExpressPatch fast-dry, low-odor, water-based system requires only one coat. It protects concrete from thermal shock, impact, corrosion, chemical attack, and abrasion while providing return to service in 4 hr. ARMORSEAL offers no outgassing at high film thickness. It may be applied directly to damp concrete using flat trowel at minimum thickness of 3/16 to 1/4 in. Kit is suitable for patching concrete, epoxy mortar systems, and urethane cement flooring systems. Read More

Adhesives & Sealants, Paints & Coatings, Chemical Processing & Waste Management

Urethane requires only one coat.

November 22, 2002

High-build, fast-drying, direct-to-metal Fast Clad(TM) DTM Urethane can be applied at 6-9 mils DFT in single coat with no outgassing or pinholing. Urethane dries in 1 hour as corrosion-resistant finish and may be applied at temperatures as low as 35°F, with airless spray equipment, brush, or roller. Coating has 2-hour potlife at 77°F and is for use directly over properly prepared steel. Read More

Paints & Coatings, Chemical Processing & Waste Management

Coatings reduce application and labor costs.

July 1, 2002

ExpressTech(TM) coatings provide fast throughput, fast return to service, fast stack times in fabrication shops, and lower VOC emissions. Fast Clad Zinc inorganically reinforced primer can be recoated in 2 to 3 hr. Reinforced film resists topcoat bubbling, dry spray and mudcracking. FasTop Urethane floor system offers a 6-8 hr return to service. Envirolastic Polyurea can be returned to service in mere minutes, significantly reducing downtime. Read More