Stainless Steel Coatings, Inc.
South Lancaster, MA 01561
Sep 06, 2007 Featuring 316L SS leafing pigment that creates protective corrosion- and chip-resistant barrier, USDA-approved STEEL-IT® Anti-Rust Stainless Steel Polyurethane can withstand salt spray, UV light, chemicals, solvents, and detergents. Suited for food processing equipment and other environments that require frequent high-pressure power washing, paint can be brushed or sprayed onto parts such as motor mounts, drive components, and brackets.

Stainless Steel Coatings, Inc.
South Lancaster, MA 01561
May 18, 2007 Capable of withstanding continuous 2,000 hr salt spray test, STEEL-IT® Stainless Steel Coatings feature 316L stainless steel leafing pigment, which creates durable finish to protect steel structures above waterline. Corrosion-resistant products are offered in epoxy-based formulation or polyurethane-based version for withstanding direct, prolonged UV exposure. Applied by brush, roller, or spray gun, paints feature metallic satin gray finish that will not chip, peel, or flake.

Tempil, Inc.
South Plainfield, NJ 07080
Apr 17, 2007 Bloxide aluminized rust-preventive weld-through primer is used to protect steel surfaces from rust where extended periods of outside storage are anticipated. It protects prepared edges and surfaces prior to welding and other heat-joining methods, eliminating need for secondary weld preparation on steel parts. It can be applied by brush, dip, or spray, is temperature-resistant to 800°F, and meets California requirements of less than 1.00 MIR (maximum incremental reactivity).

Rust-Oleum Corp.
Vernon Hills, IL 60061
Jan 16, 2007 With high-delivery valve, Industrial Choice® High Output Inverted Marking Paint produces 2-3 in. wide lines and resists early fading and chalking. Solvent-based formula can be applied in temperatures as low as 25°F and can penetrate and adhere to hot surfaces. Spray-through cap is guaranteed not to clog. Available in 16 oz cans, paint dries in less than 5 min, comes in variety of colors, and can be applied to concrete, asphalt, and brick, as well as dirt, gravel, and grass.

Maintech
Hassocks, West Sussex, BN6 9WU   United Kingdom
Nov 27, 2006 Cross Check(TM) Tamper Proof Torque Mark provides visual method for identification of vibratory loosening or tampering of nuts, bolts, fasteners, and assemblies. Visible under ambient light and fluorescent under UV light, paint marks are easily broken if parts are tampered with or become loose. Paint adheres to metal and other substrates and is safe on most surfaces.

Aremco Products, Inc.
Valley Cottage, NY 10989
Oct 16, 2006 Corr-Paint(TM) CP4000 protects steel components and structures in applications to 1,100°F. Applied using spray equipment, brush, or roller, ceramic silicone-based coating adheres to marginally prepared steel surfaces and is resistant to acids, bases, and solvents. Formulation also resists thermal shock, salt spray, and UV light. Able to dry at room temperature, this single-part, black-pigmented paint is water-dispersible and cures fully during operation at temperatures above 450°F.

Dampney Co., Inc.
Everett, MA 02149
Mar 29, 2006 Thurmalox® Stove Paint is fast drying, long lasting, and heat resistant silicone coating for stove, stovepipe, and hearth accessories. Available in variety of colors, it resists blistering, peeling, or flaking. Product comes in aerosol spray cans for application on fireplace andirons, screens and grates; barbecues; gas grills; and hibachis.

Reverso Pumps Inc.
Fort Lauderdale, FL 33315
Jun 03, 2005 Fuel Primer FP-301 pumps diesel fuel from tank through fuel lines, pushing air from main feeding line, primary filters, secondary filters, and engine. Measuring 9 5/8 x 10 5/8 x 4 7/8 in., primer includes integrated pressure relief valves to protect fuel system components. It is suited for bleeding lines when air enters system during filter replacement or when engine runs out of fuel. Under extreme conditions, primer can also pump fuel through clogged filters.

Stainless Steel Coatings, Inc.
South Lancaster, MA 01561
May 05, 2005 STEEL-IT® High-Temp Metallic Blend No. 7156 Paint features 316L stainless steel leafing pigment and other metallic components that create satin metallic finish capable of withstanding temperature cycling effects. Offered in pints, quarts, and gallons, product employs rust inhibitors that negate unfavorable reactions caused by high temperatures, salt-air weathering, and wet environments. Industrial-grade coating can be applied by brush, spray, or roller.

Stainless Steel Coatings, Inc.
South Lancaster, MA 01561
Mar 16, 2005 STEEL-IT® High Temp No. 7156 features 316 stainless steel leafing pigment and other metallic components which create finish that withstands up to 1,200°F, salt air, and water. Combining heat-resistance and corrosion-resistance in single coating, chip-resistant paint withstands oil spills and wash-downs and is suited for restoring exhaust headers and preventing rust. It is available in pints, quarts, and gallons, and can be applied by brush, spray, or roller.

Revere Products
Cleveland, OH 44135 0311
Sep 24, 2004 Available in white, yellow, and medium blue, FAST LANE bulk traffic paint creates lines that dry in under 10 min. Acrylic latex formula comes ready to use and requires no blending or water additions. Suited for busy parking lots and streets that cannot afford extended downtime, product may be applied with any proprietary striper or Graco Line Lazer.

Krylon Products Group
Cleveland, OH 44115
Aug 13, 2004 Krylon® OSHA Paints consist of special-purpose, 16 oz aerosols that visibly mark physical hazards and designate caution, promoting employee safety in workplace. Paints dry in 12 min or less and are available in safety yellow, purple, green, red, orange, blue, white, and black. Each can becomes spray gun when used with Krylon Industrial Snap and Spray(TM) accessory; heavy-duty plastic mechanism provides added application control and eliminates finger fatigue.

ADM Tronics Unlimited, Inc.
Northvale, NJ 07647 1904
Aug 12, 2004 Water-based HR-97 permits adhesion of PVDC to LDPE and PVC films, as well as many other substrates. Typically, only light application weights are needed, and primer can be applied using conventional processing equipment. It is suited for range of industries that include converting, printing, ink, and packaging.

Aremco Products, Inc.
Valley Cottage, NY 10989
Apr 05, 2004 Pyro-Paintâ„¢ 634-SIC is a high-temperature, silicon carbide-based, oxidation-resistant coating that protects graphite foam in applications as high as 2,550°F. Single-part, 75% solids material is non-volatile and can be applied using paintbrush, roller, dip process, or spray equipment. Water-based product dries quickly at room temperature within 1 hour, and cures by heating to 200°F and 500°F for 2 hours each, respectively.

Sherwin-Williams Co.
Cleveland, OH 44115
Feb 19, 2004 Krylon® Industrial Quik-Markâ„¢ Solvent-Based, Fluorescent Orange, Inverted Marking Paint provides high-solids formulation for bright, visible markings on concrete, pavement, gravel, grass, brick, and asphalt. Fast drying, formula penetrates and adheres to hot surfaces, and Spray-Thruâ„¢ cap and non-clogging spray tip provides smooth, constant application. Formulations are VOC and MIR compliant, and free of lead hazards. Sizes include 16 and 20 oz cans.

French Technology Press Office, Inc.
Chicago, IL 60601
Jul 23, 2003 CROMATIC PLUS consists of 3 lead-free, 14 pearly, 7 transparent, and 23 opaque basecoats, including 4 metallic shades. It can be used to decorate motorcycles, cars, vans, and commercial vehicles and can turn distribution outlets into fully independent paint production facilities. Range of binders (30+) makes it suitable for all 1K and 2K finishes.

Sentinel Chemical Co., Inc.
Minneapolis, MN 55432 2512
May 06, 2003 Self-priming 24/7 Coating with Microban® Antimicrobial Product Protection inhibits growth of odor and stain-causing bacteria, mold, and mildew on coating film. Microban additives are EPA registered and will last life of coating by guarding against degradation caused by microorganisms. Coating cleans up with soap and water and is suitable for lined and unlined HVAC duct systems, previously painted surfaces, drywall plaster, wood, concrete, brick, and most metal.

Sherwin-Williams Co.
Cleveland, OH 44115
Apr 16, 2003 Fast Glo Acrylic Safety Marking Paint is single component acrylic with phosphorescent luminescent pigment that enables paint to glow yellow/green in dark for up to 4 hours. Paint is for marking aisle ways, emergency routes, boundaries, and stairways to identify safe passageways in event of power outage or failure of back-up power systems. It can be applied by brush, roll, or spray and comes in quart and gallon containers.

Masterchem Industries, Inc.
Barnhart, MO 63012
Mar 20, 2003 Hammerite® RustCapâ„¢ can be painted directly over firm, rusty surfaces such as iron and steel, providing decorative finish that is resistant to corrosion and damaging effects of moisture and severe weather. As coating dries, heat-hardened glass flakes interlock with resins to form surface of protective resin and glass particles, inhibiting growth or continuation of rust. Product dries to touch in 30–45 min.

Benjamin Moore & Co.
Montvale, NJ 07645
Jun 12, 2002 Moorcraft® Super Spec® alkyd-based primer, sealer, and stain suppressor is suitable for interior use on bare or previously painted wood, plaster, drywall, plywood, and hardboard surfaces. It may also be used on exterior surfaces for limited applications, such as sealing knots or suppressing sap stains. Primer is available in gallons, in white only. Product seals charred or smoke-stained substrates and holds back water soluble stains.