Sherwin-Williams Chemical Coatings    Brampton, ON L7A1B1
May 21, 2012 Exhibiting hide, scrub, stain, block, and burnish resistance, Emerald Interior paints prevent stains from penetrating, facilitate surface cleanup, and resist water streaking/spotting. These GreenGuard IAQ certified paints emit minimal odor and feature anti-microbial properties. With 100% acrylic formula, Emerald Exterior paints resist blistering, peeling, chalking, fading, mildew, and dirt pickup. Both are tinted with ColorCast Eco Toners(TM), which maintains paint's full body after tinting.

Michelman Inc.    Cincinnati, OH 45236
Feb 24, 2012 Effective at thin coat weights of 0.04 dry gsm, Michem Flex P2300 produces adhesion between extruded resins, and paper and film substrates. Single component, optically clear formulation is water-based, contains no VOCs, and requires no curing. Typical users include converters of food packaging, medical packaging, health and beauty product packaging, and industrial laminating stock, as well as film producers and paper converters.

Color Wheel Paints & Coatings    Orlando, FL 32808
Oct 04, 2011 To create base coat that promotes efficient use of finish coat, 1260 Flex Lox Surface Sealer is formulated for optimal adhesion, chalk-binding, and sealing as well as hiding capability. Primer is designed for previously painted surfaces and uses acrylic resins to penetrate and seal substrate. With properties that promote topcoat adhesion, low-odor solution meets LEED standard for low VOC (less than 50 g/L) and is designed as companion primer for use with Flex Lox Flat and Satin.

Antistatic Industries    Northvale, NJ 07647
Jan 25, 2011 Available in white and off white, Static Paint® resists oils, grease, foodstuffs, and detergents. Two-part epoxy system is water-resistant upon drying and can be applied by brush or spray. Supplied in 1 and 5 gallon kits, paint can be used on walls, floors, steel handles, railings, and various equipment used in food processing plants, restaurants, hospitals, schools, warehouse facilities, labs, or anywhere FDA-compliant antistatic paint for direct food contact is necessary.

Masterchem Industries, Inc.    Imperial, MO 63052
Dec 02, 2010 Fast drying KILZ® Masonry and Stucco primer can be used on recently poured masonry and stucco surfaces. It penetrates and binds light surface chalk, creating surface that is ready to be top coated, and is suited for use with interior and exterior above-grade masonry, stucco, plasters, and poured and precast concrete. Available in 5 gal containers, clear primer is 100% styrene acrylic, is alkali-resistant up to 13.0 pH, and lowers risk of lime burn, discoloration, and efflorescence.

Michelman Inc.    Cincinnati, OH 45236
Nov 18, 2010 Designed for printing on HP Indigo WS6000 label and package digital printing press, DigiPrime 6029 produces optimal ink transfer, ink adhesion, and rub resistance on embossed and heavily textured, pressure-sensitive label stock. Forty-eight percent of active raw material in DigiPrime 6029 comes from renewable sources and product is also solvent-free, odorless, and repulpable.

Carboline Co.    St. Louis, MO 63144
Oct 14, 2010 Suited for galvanized steel and other non-ferrous metals, water-based Galoseal WB creates tenacious bond, which optimizes topcoat adhesion to galvanized metal surfaces. Low VOC formula accepts 2-component solvent-containing finishes such as epoxies and urethanes. Product contains no heavy metals or mineral acids and provides dry film thickness of 0.5-1.0 mils.

APV Engineered Coatings    Akron, OH 44301
Aug 24, 2010 Used as first coat in conjunction with NeverFade(TM) exterior paints, water-based NeverFade(TM) Universal Primer adheres to wide variety of substrates, including wood, stucco, aluminum siding, vinyl siding, masonry, and cement panels. White primer can be applied to prepared surfaces with brush, roller, or spray gun and requires just 24 hours of drying time. Together, both products provide environmentally friendly system for both residential and commercial projects.

IdeaPaint    Ashland, MA 01721
Aug 10, 2010 IdeaPaint® dry-erase paint recoats chalkboards and worn whiteboards saving the cost of having to replace them. Suitable for all dry-erase markers, product can also be applied to any wall. It converts previously unused spaces into new visual use and collaborative areas. Applied by roller and offered in various colors, paint is packaged in 50 sq ft kits.

Michelman Inc.    Cincinnati, OH 45236
Jul 13, 2010 Designed for converters of flexible packaging substrates, water-based Michem® Flex P1883 adheres to aluminum foil and paper, bonds to extrusion coated resins, and protects foil from corrosion. Product can also help prevent packages from delaminating when in contact with aggressive contents. Featuring 25% solids content and freeze/thaw stability, primer meets regulations for food packaging, making it suitable foil-based packages for condiments such as ketchup, mustard, and salad dressings.

Michelman Inc.    Cincinnati, OH 45236
Mar 17, 2010 Designed to meet regulations for food packaging, Michem® Flex P1852 produces strong adhesion between flexible substrates and extrusion coated polymer resins. Water-based product contains no VOCs and requires no mixing. It can be applied on single in-house coating station and cures immediately upon application. Supplied as concentrated dispersion, primer will bond to resins extruded at low temperatures, which minimizes odor and optimizes heat seal.

Federal Process Corp.    Cleveland, OH 44128
Feb 08, 2010 Designed to mark and identify manhole covers and tank valves, UV resistant FAS-MARK(TM) Cap and Cover Paint enables upside down application with little or no overspray and can be applied directly to metal and other clean, dry surfaces. Paint is water-repellant, VOC compliant, and dries within 8-10 min. Available in 8 highly pigmented bright colors, in 15 oz aerosol cans, acrylic paint can also be used on island forms, structural steel, storage tanks, or equipment.

Antistatic Industries    Monmouth Junction, NJ 08852
Oct 02, 2009 Available in 1- or 2-part systems, STATICPAINT® protects against any static build-up on personnel handling parts and assembling PC boards. Conductive, acrylic, water-based paint also helps eliminate dust clinging to walls and has no hot spots. Suitable for indoor or outdoor use, product withstands wear and tear in high traffic areas, and is UV protective to resist fading from halogen, fluorescent, and tungsten light.

Sherwin-Williams    Cleveland, OH 44115
Sep 30, 2009 Fast drying Envirolastic® LT Primer is low-viscosity primer that can be applied in temperatures as low as 0ºF. At 77ºF, surfaces can be recoated after 1 hr, and at 40ºF, surfaces can be recoated after 5 hr. Suited for use with polyurea and polyurethane topcoats, primer offers long pot life for brush/roll applications and minimizes likelihood of irregularities in coating film caused by outgassing from concrete substrate. It can be applied via airless spray.

Sherwin-Williams    Cleveland, OH 44115
Aug 06, 2009 Supplied as 2-package industrial coating, Tile-Clad® High Solids Mildew Resistant epoxy protects against mildew growth on exterior surfaces where dampness and humidity are of concern. It features gloss finish and is offered in variety of safety colors. Applications include clean rooms, laboratories, institutional kitchens, and chemical processing equipment where mildew growth must be guarded against in order to maintain operations.

Sherwin-Williams Co. c/o Ultimate Lead Systems    Berea, OH 44017
Aug 05, 2009 Suited for surfaces in damp, humid locations, Tile-Clad® High Solids Mildew Resistant Epoxy protects substrates such as steel, galvanizing, and concrete. Two-package coating features gloss finish and is available in variety of safety colors. Typical applications include clean rooms, laboratories, institutional kitchens, and chemical processing equipment, as well as water tank exteriors, structural and support steel, power plants, offshore structures, and fuel storage tanks.

Amerimax Building Products, Inc.    Plano, TX 75024
Jun 30, 2009 Available in 6 colors, Aluma-Shield(TM) low-maintenance aluminum patio cover system features Teflon® additive and will repel oil, dirt, dust, and stains. It provides real wood appearance with combination of matte finish and semi-gloss cleaning characteristics. Offering protection against UV, salt, pollution, and weathering, customizable paint system makes surface resistant to chalking, fading, cracks, peels, warps, and termites.

ISP    Wayne, NJ 07470
Apr 17, 2009 Used to stabilize primary lignin in wood, SunCare® Lignin Protection includes 3 products designed to protect against degradation and yellowing caused by UV radiation. SunCare Concentrate and SunCare UV Concentrate serve as additives in primer and stain applications, while SunCare 800 is supplied as ready-to-use, formulated primer for untreated wood. All three products are based on UV-absorber plus stereochemically hindered amine chemistry and do not contribute odor to formulation.

PPG TrueFinish (R) Industrial Coatings    Pittsburgh, PA 15272
Mar 24, 2009 Spectracron 315 primer surfacer fills scratches and minor surface imperfections in substrates such as fiberglass, plastic, sanded or blast cold-rolled steel, and treated aluminum. Containing no heavy metals, 2-component, high-solids, high-build primer can be applied with Exempt Blend TFS321-50 reducer for VOC output of 2.1 lb/gal. Corrosion- and humidity-resistant compound can be sanded after 90 min and be top-coated with 2-component polyurethane enamels.

BASF Corp.    Wyandotte, MI 48192
Mar 09, 2009 Producing paint colors with low odor and zero VOC content per U.S. Environmental Protection Agency Method 24, PureOptions colorants are designed for paint manufacturers, and retailers. These colorants are also free of alkylphenol ethoxylates, and do not require special equipment to prevent drying and clogging at tip of dispensing nozzle.