ISP    Wayne, NJ 07470
Apr 17, 2009 Used to stabilize primary lignin in wood, SunCare® Lignin Protection includes 3 products designed to protect against degradation and yellowing caused by UV radiation. SunCare Concentrate and SunCare UV Concentrate serve as additives in primer and stain applications, while SunCare 800 is supplied as ready-to-use, formulated primer for untreated wood. All three products are based on UV-absorber plus stereochemically hindered amine chemistry and do not contribute odor to formulation.

PPG TrueFinish (R) Industrial Coatings    Pittsburgh, PA 15272
Mar 24, 2009 Spectracron 315 primer surfacer fills scratches and minor surface imperfections in substrates such as fiberglass, plastic, sanded or blast cold-rolled steel, and treated aluminum. Containing no heavy metals, 2-component, high-solids, high-build primer can be applied with Exempt Blend TFS321-50 reducer for VOC output of 2.1 lb/gal. Corrosion- and humidity-resistant compound can be sanded after 90 min and be top-coated with 2-component polyurethane enamels.

PPG TrueFinish (R) Industrial Coatings    Pittsburgh, PA 15272
Mar 23, 2009 Spectracron 320 2-component, high-solids enamel can be sprayed as low-gloss smooth coat or textured/spattered to provide custom finish that hides various surface imperfections. It contains no hazardous air pollutants and less than or equal to 2.8 lb/gal VOC output when applied. Enamel also features optimized mar, abrasion, and chemical resistance as well as hardness and flexibility.

BASF Corp.    Wyandotte, MI 48192
Mar 09, 2009 Producing paint colors with low odor and zero VOC content per U.S. Environmental Protection Agency Method 24, PureOptions colorants are designed for paint manufacturers, and retailers. These colorants are also free of alkylphenol ethoxylates, and do not require special equipment to prevent drying and clogging at tip of dispensing nozzle.

Krylon Products Group    Cleveland, OH 44115
Oct 07, 2008 Atrium® latex paint suits interior applications on walls and ceilings of primed plaster, wallboard, wood masonry, and primed metal. Offered in flat, eggshell and semi-gloss finishes, it has zero volatile organic compounds (VOCs) and low odor properties, making it safe for use in occupied areas without causing disruption. Paint can be used in hospitals, schools, offices, manufacturing facilities and other high traffic, occupied areas.

Chemline Inc.    St. Louis, MO 63103
Jul 14, 2008 With mix ratio of 4A:1B, Monomid(TM) Epoxy Flooring System forms cleanable, high-gloss finish. It offers 5 mils DFT in one coat when applied over Monomid Clear Sealer and can be applied over various other primers for application on steel. Solution supports addition of anti-slip aggregate or sand and also offers moisture resistance. In 3 hr at 77ºF, coating dries to touch to form abrasion- and chemical-resistant finish. Use is suited for industries requiring low odor and VOC levels.

Valspar Corp., The    Minneapolis, MN 55415
Jul 01, 2008 Flurospar® SR is used to coat aluminum windows, curtain walls, shutters, awnings, louvers, wall panels, and other building components. Spray-applied, factory cured coating is formulated with solar reflective pigments that keep building components cool. Available in white, black, green, blue, brown, and red, eco-friendly and mar-resistant coating minimizes need for touch-up/repainting. Pearlescent effects are also available in Flurospar SR Classic II formulation.

PPG TrueFinish (R) Industrial Coatings    Pittsburgh, PA 15272
Jun 12, 2008 Suitable for interior and limited exterior applications, Aquacron 833 can be field top coated with water reducible alkyd enamels or solvent-based enamels after thoroughly dried. Low-odor product contains no heavy metals, is VOC-compliant, and has less than 1 lb of organic HAPS/gal of solids. Applications include metal fabrication, structural steel, industrial machinery, cabinets, racking, and shelving.

PPG TrueFinish (R) Industrial Coatings    Pittsburgh, PA 15272
Jun 12, 2008 Water-reducible alkyd primer, Aquacron 835, is suited for industrial use on bare metal surfaces where corrosion resistance is needed. It can be top coated with water reducible alkyd enamels or solvent-based enamels in field after thoroughly dried and contains no heavy metals. Along with less than 1 lb of organic HAPS/gallon of solids, low-odor primer features 2.8 lb/gal VOC-compliant formulation compatible with tap water reduction.

PPG TrueFinish (R) Industrial Coatings    Pittsburgh, PA 15272
Jun 12, 2008 Formulated for accelerated drying times, Aquacron 880 Series interior/exterior enamel is intended for industrial use on bare or primed metal surfaces. Low-odor solution contains no heavy metals, comes in range of colors and gloss, and has no recoat window. Water can be used for reduction and clean-up, and product can be formulated to 2.8 VOC (less water) compliance.

PPG TrueFinish (R) Industrial Coatings    Pittsburgh, PA 15272
Jun 12, 2008 Applied directly to cleaned or blasted steel, Spectracron 380 promotes surface protection and color/gloss retention. This 2-component exterior-grade enamel has blended VOC of 3.5 lb/gal max and imparts resistance to chemicals, abrasion, and impact. There are no hazardous air pollutants or SARA 313 constituents, and various colors and glosses are available. Poly-Iothane HS can be applied directly to cleaned or blasted steel as well as over 2K epoxy or polyurethane primers.

PPG TrueFinish (R) Industrial Coatings    Pittsburgh, PA 15272
Jun 12, 2008 Promoting corrosion resistance over cleaned and treated steel, Spectracron 560 suits short wet-on-wet application windows when topcoated with Spectracron 2K polyurethane enamels; polyurethane topcoat can be applied directly over this primer 10-15 minutes after application. Formulated with VOC less than or equal to 3.5 lb/gal and less than 0.17 lb HAPS/gal, this 2-component, chrome-free primer adheres to cleaned G90 galvanized steel and aluminum as well as fiberglass substrates.

Enviroline Group (IECC)    Pompano Beach, FL 33069
May 13, 2008 Two-component, high-gloss Envirothane® 550 is suited for industrial and commercial applications requiring color retention as well as UV, chemical, abrasion, and moisture resistance. Product is available in 22 standard colors, including 5 safety colors.

Valspar Corp., The    Wheeling, IL 60090
May 01, 2008 Developed for painting contractors, low VOC ZAP Interior/Exterior Latex Primer blocks typical household stains caused by wax crayons, pencil, pen, china markers, ketchup, mustard, and grease. ZAP Interior Oil-Based Primer blocks difficult-to-remove stains including those from smoke, fire, water damage, and tannin bleed, and seals in odors such as nicotine, fire/smoke damage, and pet odors. Both provide mildew resistant finish, require one-coat application, and typically dry in 1 hr.

Henkel Loctite Corporation    Rocky Hill, CT 06067
Apr 22, 2008 Loctite® QuickStix(TM) 7088(TM) Primer enhances performance and accelerates cure of anaerobic machinery adhesives used in threadlocking, thread sealing, gasketing, and retaining applications. Featuring environmentally friendly formulation free of solvents and VOCs, product is recommended for use on plated, anodized, and galvanized parts as well as inactive metals. It may also be used on cold metals and assemblies that feature large gaps or deep threads.

TENNANT    Minneapolis, MN 55426
Mar 13, 2008 With VOCs below 250 g/L, WearGuard - CRU(TM) 250 Topcoats meet VOC requirements of LADCO, OTC, and Chemicals Control Branch of Environment Canada. Products offer UV light stability, light reflectivity, and ability to withstand Skydrol®, jet fuels, and other industrial chemicals. Available in white, light gray, and gray, coatings come in 100% aliphatic, non-yellowing formula to maintain appearance over time.

CertainTeed Corp.    Valley Forge, PA 19482-0860
Dec 14, 2007 Featuring hide and self-leveling characteristics, ProRoc ® Level V Wall and Ceiling Primer/Surfacer is polyvinyl alcohol product that creates smooth wall finish and takes Level 4 wall finish to Level 5 without need to putty or skim coat. It meets American Society for Testing and Materials (ASTM) and Gypsum Association (GA) specifications for Level 5 finishes.

Techspray Inc.    Amarillo, TX 79107
Nov 21, 2007 Licron Crystal(TM) is permanent static dissipative coating that adheres to metal and plastic surfaces, operates from 0-100% humidity, and maintains 107-109 W resistivity. It can convert standard bumpers, bins, tools, and other surfaces into ESD-safe products. Applications include electronic assembly work stations, bins, carts, and trays, packaging for sensitive components, production conveyors and bumpers, and static protection for electronic devices.

Sherwin-Williams Chemical Coatings    Brampton, ON L7A1B1
Oct 23, 2007 One-Pass Primer low VOC waterborne primer covers most substrates like radiata pine, MDF, hardboard, dark-stained poplar, sugar pine, and yellow pine. Features include suitability for both indoor and outdoor use and wide range of color choices. Primer can be applied via various spray methods, including roll coat, curtain coat, vacuum coat, or fancoat, and can be top-coated with high quality latexes.

Garon Products, Inc.    Wall, NJ 07719 1924
Oct 11, 2007 Applied by roller, MORTARTHANE(TM) SL is self-leveling, durable floor topping that withstands repeated exposure to hot oil or steam without pitting or cracking. It is packaged in premeasured components in 5 gal unit covering 32 sq ft at 3/16 in. deep. MORTARTHANE(TM) HF is trowel-applied and packaged in 5 gal units covering 18 sq ft at ¼ in. deep. Both thermal shock-resistant resurfacers meet USDA, FDA, and OSHA standards.