Paints & Primers

Adhesives & Sealants, Paints & Coatings

Electric Paint suits 3D printing applications.

January 20, 2015

Consisting of electrically conductive liquid wire, Electric Paint can be used as cold-soldering medium or conductive adhesive. Non-toxic and solvent-free, product is suitable for rapid prototyping, repairing PCBs, and painting circuits and sensors on any surface. Once printed or applied, paint dries quickly at room temperature and can be removed with soap and water. Read More

Adhesives & Sealants, Paints & Coatings, Chemical Processing & Waste Management

Stainless Steel Paint withstands up to 1200°F.

November 28, 2014

Adhering to cast and machined metal surfaces, Dampney Thurmalox® 282 will not discolor, chip, crack, or peel at temperatures up to 1,200°F. High-heat, one-component silicone coating comes in aerosol spray cans as well as quarts and gallons for application by brush or roller. In addition to industrial heaters, vents, conveyors, compressors, piping, and turbines, paint is suited for automotive exhaust manifolds, BBQ pits, smokers, and grills. Read More

Paints & Coatings

Epoxy Primers are formulated for ESD floor coating compatibility.

October 31, 2014

As high-build, solvent-free system intended for use where odors/VOCs are unacceptable, light grey 46062 Statguard provides self-leveling/penetrating epoxy primer for concrete floors. Medium viscosity/100% solids product offers coverage of ~200 ft²/gal. As 2-component, catalyzed, water-based epoxy suited for use as primer or topcoat for concrete, metal, and wood, light grey 46063 Statguard adheres to green concrete and exhibits abrasion and chemical resistance. Coverage is ~320 ft²/gal. Read More

Paints & Coatings, Green & Clean

Water-Based Anti-fouling Paint withstands marine environment.

October 2, 2014

With no strong solvent smell and low VOC release, Neptune 5 Hybrid Paint Film is suited to environmentally conscious boat yards and marinas. Product self-polishes similar to seasonal ablative and can be applied over all other bottom paints. Available in black, blue, green, and red, paint requires no respirator or sanding between coats and can be cleaned up with soap and water. Read More

Paints & Coatings

Heat Resistant White Paint resists yellowing up to 1,200°F.

July 29, 2014

While not intended for direct contact with flames, Thurmalox® 290-00 Heat Resistant White Paint is designed for vent pipes and other parts exposed to elevated temperatures. Formulation prevents yellowing at up to 1,200°F and will not chip, crack, or peel. Ready-to-use product, suited for various industrial, commercial, and consumer product applications, comes in 5 gal pails, gallons, quarts, and aerosol spray cans and can be used as clear gloss top coat to achieve porcelain-like finish. Read More

Paints & Coatings

Digital Press Primer improves Xeikon print quality.

May 30, 2014

Formulated for use on Xeikon digital presses, DigiPrime® 4453 water-based, water-resistant primer promotes adhesion of Xeikon electrophotographic toners to diverse paper and film substrates. This 100% aqueous product, designed to improve ink receptivity, rub resistance, and image quality on printed materials, is approved for direct and indirect food contact in Europe and USA and does not yellow or lose its print receptivity over time. Read More

Adhesives & Sealants, Paints & Coatings

Multi-Surface Primer and Sealer promotes adhesion.

May 12, 2014

Available in project size 2-gal bucket, KILZ® HIDE-ALL™ helps prepare surfaces for painting and evens permeability. High-hiding latex primer sealer helps minimize issues caused by dark colors and minor surface stains to create consistent canvas for desired finish. Able to be top-coated after 1 hr with latex or oil-based paint, product is suited for use on interior surfaces, including drywall, cured plaster, woodwork, masonry, concrete block, brick, and previously painted areas. Read More

Paints & Coatings, Green & Clean

Low-Odor, Zero-Emission Paint features 40% bio-renewable content.

February 25, 2014

Made with up to 40% plant-based, bio-renewable materials, Natura Renew™ delivers zero emissions and is available in thousands of colors with eggshell and semi-gloss finish. Durable paint also offers facilitated application and is washable for long-lasting finish. Read More

Paints & Coatings, Chemical Processing & Waste Management

Autodeposition Coating suits iron castings and ferrous metals.

February 18, 2014

Formulated to deliver uniform, defect-free surface coating on both inside and outside of complex components, Bonderite® M-PP 930C™ provides corrosion and abrasion resistance, thermal stability, and edge protection. Water-based, epoxy-acrylic urethane coating will coat any surface it wets during immersion of parts with no limitation as to part size, shape, or density. Non-flammable, non-explosive, and RoHS-compliant, coating contains no toxic heavy metals, very low VOCs, and no APEs or HAPs. Read More

Paints & Coatings

Two-Part Topside Enamel provides high-gloss finish.

November 14, 2013

Consisting of 2-part, silicone-enhanced polyurethane paint, EZ-Poxy2 can be applied over any previously painted surface, gel coat, or wood. Combination of added gloss, wear resistance, and UV protection helps maintain boat's polished look for years. Available in wide variety of colors, paint can be applied with roller or brush and is extremely forgiving, minimizing effects of brush strokes and ensuring clean finish equal to that of spray. Read More

Paints & Coatings

Water-Based Exterior Architectural Paint helps preserve wood.

November 13, 2013

Eco Armor latex paint complements existing lumber protection by adding UV and moisture protection while preserving exterior lumber architectural details and providing protection from termites, rot, and fire. Intended for use on properly primed plaster, stucco, concrete, masonry, metal, wood, and drywall, proactive product may be applied by brush, roller, or spray. Drying times are 30 min to 1 hr (to touch) and 5–6 hr (to recoat) under optimal conditions. Read More

Paints & Coatings, Chemical Processing & Waste Management

Urethane Coating provides high temp corrosion resistance.

October 16, 2013

Applied in 4.0 mil wet film thickness that dries to 2.0 mils, Corr-Paint™ CP2010 provides corrosion resistance on copper and steel components and structures exposed to oxidation and corrosive atmospheres up to 400°F. Single-part, aluminum-rich formula dries and cures at room temperature to hard, non-porous, abrasion-resistant surface. With viscosity of 300-600 cP and specific gravity of 1.08 g/cc, product is also resistant to wide range of acids, bases, fuels, and solvents. Read More

Paints & Coatings

Interior Paints provide hide and touch-up capabilities.

October 10, 2013

Designed for industry professionals, KILZ PRO-X® 100 Series can be applied with brush or roller. One 5-gallon can covers up to 2,000 sq ft, making paint suitable for large, time-sensitive projects, such as multi-family residential or commercial properties. Available in interior dead flat, eggshell, and semi-gloss sheens, latex paints are suitable for use on drywall, concrete block, masonry, metal, wood, cured plaster, architectural plastics, and poured concrete. Read More

Adhesives & Sealants, Paints & Coatings

ESD Floor Finish enhances industrial environment safety.

August 28, 2013

Created for industrial areas and open area environments requiring static protection, EpoxyStyle ESD 2-part epoxy floor finish becomes dry to touch within 5–7 hr after application and is ready for traffic 10–12 hr after application. Chemical- and abrasion-resistant product complies with Ozone Transport Commission and California VOC regulations, may be installed over old VCT and concrete, and provides uniform matte finish; gloss can be attained when used with DuraShield ESD finish. Read More

Paints & Coatings

Anti-fouling Marine Paint provides multi-season protection.

August 7, 2013

Replacing harsh solvents found in most bottom paints with water, Hydrocoat Eco combines water-based, ablative technology with Econea metal-free organic biocide. Slime fighting formula provides soap and water cleanup with no heavy solvent smell. Since Hydrocoat Eco is self-polishing, paint film wears away with use, eliminating build up and need for sanding. Copper-free paint will not cause galvanic corrosion issues, making it suitable for bronze IPS and jet drives, outdrives, and outboard motors. Read More

Adhesives & Sealants, Textile Industry Products, Paints & Coatings, Materials & Material Processing, Architectural and Civil Engineering Products

Metal Roofing Products extend commercial/industrial roof life.

June 14, 2013

Using elastomeric roof coating technology formulated with 100% acrylic polymer for optimal adhesion, water protection, and durability, Fluid Applied Metal Roofing Systems comprise metal top coats, primers, and patching; skylight restoration; as well as seam tape and fabrics. ENERGY STAR®-approved products protect building envelope from harsh weather, airborne pollutants, and emissions. They can also reduce roof surface temperature up to 100°F and minimize buildings' cooling demands. Read More

Paints & Coatings

Anti-Static Paint protects production and employees.

June 13, 2013

By dissipating static charges in range of 107–109 Ω and carry them to ground, StaticPaint® can protect floors, walls, ceilings, countertops, and even cabinets. Application of anti-static paint to walls and ceilings can prevent dust from collecting, gathering charge, dropping into sensitive components, and releasing charge. Water-based and non-toxic, StaticPaint meets California’s low VOC standards, and can be color matched by color code at major paint retailers. Read More

Paints & Coatings

Spray-On Wall Paint dampens sound.

February 21, 2013

Using 2-step base coat and finish coat system that can be applied to both existing structures and new construction, Coat of Silence™ stifles mid-range sounds and minimizes common area noise. Spray-on sound deadening paint is mold-resistant, class A fire retardant, and requires only one person for application. Typical applications include hospitals, hotels, schools, apartments, home media rooms, offices, and retail centers. Read More

Paints & Coatings

Inline Primer improves print quality on synthetic substrates.

September 24, 2012

Formulated for use on synthetic substrates printed on HP Indigo WS6000 and WS6600 digital presses, Michem In-Line Primer (ILP) 040 is HP-recommended and produces print receptive surface that improves ink transfer and adhesion of HP Indigo Electroinks. Both WS6000 and WS6600 both offer inline priming station that lets users prime and print substrates in one pass. Unit applies appropriate amount of ILP 040 primer, optimizing ink adhesion and press performance for max printed output quality. Read More

Paints & Coatings

Corrosion Protective Coating serves applications to 1,300°F.

August 1, 2012

Corr-Paint(TM) CP3015-AL provides corrosion protection of carbon steel structures found in refractory lined rotary furnaces as well as automotive and industrial exhaust systems. Formulated using waterborne silicate binder system filled with blend of aluminum and ceramic corrosion inhibiting pigments, single-part coating system comes ready to use and has viscosity of 250-900 cP with solids content of 36.8% by weight and 19.1% by volume. It cures in 2 hr at 200°F plus 1 hr at 500°F. Read More