Garon Products, Inc.
Wall, NJ 07719 1924
Aug 22, 2003 Non-shrink TREFLITEâ„¢ bonds to concrete, wood, steel, aluminum, glass, and ceramic surfaces to provide nearly indestructible finish to old and new floors. Resistant to thermal and physical shock, abrasions, acids, alkalis, and solvents, product also resists steel-wheel traffic with compressive strength of 14,000 psi. Resurfacer is 100% non-skid, even when wet, and no special tools or skills are required for application. Each 5 gal pail covers 40 ft² at 1/8 in. deep.

Interpolymer Corp.
Canton, MA 02021
Jul 01, 2003 Megatran® 248 produces floor finish formulations that are easily applied and repaired, and perform well over wide range of temperatures and humidities. Glossy finishes respond well to burnishing, low-speed spray buffing, and frequent ultra-high-speed maintenance. Use of sulfate and sulfonate groups attached to polymer backbone stabilize polymer emulsion particles during drying process.

Interpolymer Corp.
Canton, MA 02021
May 28, 2003 Megatran® 233 features high gloss characteristics with scuff and scratch resistance. Due to high solids content, formulations based on Megatran 233 polymer require fewer coats than are needed with conventional lower-solids formulations. Use of sulfate and sulfonate groups attached to polymer backbone stabilize polymer emulsion particles during drying process. Finishes respond well to low-speed spray buffing and occasional ultra-high-speed maintenance.

Rez-Solutions
Lakewood, NJ 08701
Dec 03, 2002 Two-component, 100% solids, pigmented, polyurethane-base Soft Floor Systems are suitable for balconies, ramps, locker rooms, hospitals, and skating rinks. Soft Floor 6000 is topped with polyurethane or pigmented Polyurea. It can be applied between 10 and 250 mils in one pass without bubbling due to out gassing. Soft Flake 6001 is broadcast with colored vinyl flakes and top coated with clear urethane. Soft Grip 6002 is broadcast with pigmented rubber fines for non-skid safety surface.

Dow Plastics
Midland, MI 48641-1206
Nov 15, 2002 EFFECTIONS special effects resins come in array of looks, including metallics, glitters, fluorescents, translucents, color shifting, marble, and pastels. Base finishes are customized for each application. Finishes are not only available as pre-colored formulations, but also as color concentrates for use with PROMATCH SM Self-Coloring Service.

Ramsey Co.
Marlborough, MA 01752
May 07, 2002 Gallery ultra high speed (UHS) floor finish provides wet-look gloss and responds quickly to UHS burnishing. It provides mark resistance and durability.

Birchwood Casey
Eden Prairie, MN 55344 2138
Apr 17, 2002 BK-TT Mini TRU TEMP(R) part finishing system utilizes black process to provide corrosion protection on castings and powdered metal parts. Two-step chemistry creates black magnetite finish, which is Mil Spec compliant, measures .000020 in. thick, and can withstand 100 to 300 salt spray exposure. Supplied as turnkey system, components include 7 tanks and covers, 2 hot plates, and all chemicals needed to operate 5 gallon black oxide line.

Chroma Corp.
McHenry, IL 60050 8376
Mar 11, 2002 Chroma-Flair(TM) finishes provide look of pearl finish. Complete line of flair finishes are used on rotational molded parts and are available in alternative color selections, including blue and orange base colors. Effects vary by pellet count per gram. Finishes can be used for outdoor applications and for special effects.

Birchwood Casey
Eden Prairie, MN 55344 2138
Dec 27, 2001 BC40 TRU TEMPâ„¢ produces high-quality black-oxide finish on iron and steel components in 10 to 15 min. Non-polluting system produces satin, true-black magnetite finish of 0.000020 in. thickness. Compact, 7-tank system eliminates severe splattering and boil-over hazards. Process is suitable for dimensionally-critical parts, including power drive components, gears, and machine parts, and meets MIL-C-13924C Class 1 specification.

Birchwood Casey
Eden Prairie, MN 55344 2138
Nov 21, 2001 Produced with concentrates, color and antique finishes can be produced without hazardous effluent on parts made of die-cast materials, copper, brass, bronze, nickel, silver, pewter, zinc, and aluminum. Suitable for large- and small- volume tank lines, finishing processes are safe and easy to use in manual or fully automatic modes. Finish comes in Antique Black, Antique Brown, Aluma Black and Zinc Black.

Rust-Oleum Corp.
Vernon Hills, IL 60061
Nov 06, 2001 Six colors and 1 green primer are included in Industrial Choiceâ„¢ Multi-Purpose Spray Paint line. Colors include machinery blue gray, machine green, sun yellow, machinery gray, shadow gray, dusty pink, and green primer. 35 additional colors are also available that include OSHA safety colors, fluorescents, zinc-rich cold-galvanizing compound and primers. Paints are formulated specifically for indoor or outdoor industrial applications.