ITW Gema, An Illinois Tool Works Co.    Indianapolis, IN 46208
Jul 12, 2011 Equipped with integrated cascade power supply that provides 100,000 V of first-pass power, OptiFlex2 can spray virtually any powder. Precision current and voltage controls ensure maximum transfer efficiency and coating uniformity. System simplifies coating of difficult shapes by applying powder coating precisely where it is needed. Using powerful blasts of air, PowerClean feature cleans entire powder path from pump to gun tip.

Jotun Paints, Inc.    Belle Chasse, LA 70037
Nov 17, 2010 Suited for heat-sensitive substrates such as medium-density fiberboard, Era-Coat MDF products include Era-Coat MDF Primo primer and Era-Coat 32T top coat, available in 20 colors and textures. Products leave coated surface reclaimable and resistant to scratches, water, stains, and impact. Formulated without solvents, coatings do not release any VOCs and are suitable for office furniture, retail displays, flat-pack furniture, doors and countertops, kitchen cabinets, and bedroom wardrobes.

Nordson Corporation    Amherst, OH 44001
Feb 22, 2008 Featuring plug-and-play design, Encore Manual Spray System is available in 5 mobile configurations that include 2 vibratory box feeder models and 3 different capacity hopper sizes. Gun includes PowerPurge(TM), which cleans powder path from base of handle completely, delivering consistent spray patterns and powder deposition. Incorporating primary electronic and pneumatic components in one enclosure, control unit provides digital closed-loop flow control.

Infratrol Manufacturing Corp.    New Berlin, WI 53151
Jan 17, 2008 All-electric ecoflex is designed for powder coating of small parts and comes in 4 standard sizes, with smallest requiring 700 sq ft of floor space. System requires no drains and generates no sludge or hazardous waste, no hazardous air pollutants, and no ozone-depleting substances.

Xiom Corp.    W Babylon, NY 11704
Oct 30, 2007 Designed for marine vessel hulls, Ship and Boat Bottom Coating is polymer/ceramic-based and contains no TBT or VOCs. Powder coating has evenly dispersed active copper oxide and silver ions in polymer matrix that is fully melted when applied with thermal spray process. If there should be break or tear in coating, nylon modified fuse bond epoxy between hull and coating maintains integrity. Active ingredients are strongly held and always available in coating, minimizing ablating.

Nordson Corporation    Amherst, OH 44001
Oct 19, 2007 Prodigy® Generation II utilizes dense phase powder transport and application technology, which allows powder delivery from storage/conditioning device to manual or automatic spray gun using high-density powder flow and low-velocity conveyance air. Attaching at front of gun, barrel accommodates flexible powder delivery hose. Device also includes gun control cable, injection molded pump body, and optional Prodigy Generation II lance extensions.

NYLOK Corp.    Macomb, MI 48042 4007
Sep 04, 2007 NYCOTE® NYCREST(TM) coats root and flank of thread without coating crest, which provides solid metal-to-metal contact between thread and collet. It protects against thread contamination from electrodeposited paints, primers, coatings, and adhesion of weld spatter on Drawn Arc Weld Studs. Nonconductive WHITE® 98% TEFLON® PFA powder coating also adds lubricity to fasteners, reduces torque vs. tension scatter, and achieves known and repeatable clamp load.

NYLOK Corp.    Macomb, MI 48042 4007
Jan 30, 2007 Applied to threaded fasteners, NYCOTE® nonconductive WHITE® TEFLON® PFA powder coating provides complete thread masking and protection against contamination from electrodeposited paints and primers as well as adhesion of weld spatter. Product also adds lubricity to fasteners and reduces torque vs. tension scatter. While process eliminates need to manually apply and remove caps, tape, or plugs, there is also no need for slave bolts and retapping.

ITW Automotive Finishing Group    Toledo, OH 43612
Aug 23, 2005 Designed for automotive exterior and interior cut-in applications, RPA-1 powder gun provides bell-like performance features such as uniform film build and transfer efficiency. It atomizes with no moving parts and simplifies automation controls while minimizing number of robots and atomizers. Simplified design eliminates rotating parts and eliminates defects caused from impact fusion.

NYLOK Corp.    Macomb, MI 48042 4007
Jun 22, 2005 Applied to threaded fasteners with 100% Teflon® powder, NYCOTE® coating provides protection against thread contamination from electrodeposited paints, primers, and adhesion of weld spatter. Non-conductive powder coats only external and internal threads. In addition to eliminating masking, plugging, or capping of threads, NYCOTE also eliminates need for slave bolts and re-tapping. It adds lubricity to fasteners and minimizes torque vs. tension scatter.

Sterigenics International, Inc.    Oak Brook, IL 60523
Aug 23, 2004 Designed to protect industrial steel pipes, Raprexâ„¢ 400 thermoplastic powder coatings consist of modified, linear low-density polyethylene or high-density polyethylene powders. They can be applied to steel, aluminum, copper, and other metals employing standard powder coating techniques. Coatings adhere to base polyethylene material, through oxidation, without addition of chemical additives or metallocene catalyst.

NYLOK Corp.    Macomb, MI 48042 4007
Mar 05, 2003 Fused-On Powder Coatings prevent metal-to-metal contact, provide wear resistance, and protect against rust. Epoxy powder is applied by electrostatic spray or fluidized bed and cured in convection ovens. Nylon 11 and 12 powders are applied by electrostatic spray and cured by post heating induction process. Nylon 11 prevents galvanic corrosion between dissimilar materials, while thick coating of epoxy powder can be used on sharp metal parts to prevent cutting.

Iontech, Ion Technologies Corp.    Cincinnati, OH 45237
Feb 27, 2002 QualityCoat(TM) ColorChange booth includes removable cartridge module for color change. Variable speed motor drive controls booth containment air. It has built-in self-diagnostics, and provides motor status readout, voltage surge protection, and phase loss detection circuits. Fan speed can be preset or infinitely variable. Unit is equipped with electrical control panel and booth pneumatic control panel.

Cornell Rolling Door Specialists    Mountaintop, PA 18707
Jan 29, 2002 SpectraShield powder coating finish is applied to components of rolling doors and rolling counter doors. It provides color retention, UV stability, and resistance to corrosion, chemicals and abrasion. Its total palette consists of more than 200 colors. SpectraShield gray powder coating is used on all of company's exposed steel door surfaces including guides, bottom bar, and endplate brackets.