Rehm Thermal Systems
Blauberen   Germany
Oct 27, 2009 RDS Drying Systems offer thermal oxidation process designed to eliminate challenge of residue contamination stemming from photovoltaic metallization in order to minimize maintenance and provide cleaner process chamber. Process involves heating gas to temperature greater than 500°C, while arrangement of heater and granulate pack lend to space and energy consumption reduction. In order to oxidize hydrocarbons, catalyzers are installed downstream from heating chamber.

Advanced Polymer, Inc.
Carlstadt, NJ 07072
Oct 26, 2009 Designed to overcome decking materials' inherent inclination towards stain retention, API-221F one-component, water-based polymer/oligomer dispersion protects appearance and surface aesthetics of composite wood decking. It crosslinks at ambient temperature to form topical polymeric film with chemical anchors that penetrate into substrate. Resultant clear coating film resists staining from foods, wine, oil, grease, and moisture.

Sherwin-Williams
Cleveland, OH 44115
Sep 30, 2009 Fast drying Envirolastic® LT Primer is low-viscosity primer that can be applied in temperatures as low as 0ºF. At 77ºF, surfaces can be recoated after 1 hr, and at 40ºF, surfaces can be recoated after 5 hr. Suited for use with polyurea and polyurethane topcoats, primer offers long pot life for brush/roll applications and minimizes likelihood of irregularities in coating film caused by outgassing from concrete substrate. It can be applied via airless spray.

Honeywell
Golden Valley, MN 55422 3935
Sep 28, 2009 Designed to optimize light transmittance through glass that covers PV panels, SOLARC transparent coating helps maximize PV module efficiency and power output. Coating also minimizes glare from glass, allowing PV panels to blend with surroundings. Compatible with spray, roller, curtain, slot-die, and spin-on coating processes, liquid-based coating protects glass in hot and humid conditions and enables anti-soiling and self-cleaning functionality that prevents dust accumulation.

Sherwin-Williams
Cleveland, OH 44115
Sep 23, 2009 Containing less than 50 g/L VOCs, GP 4408/4409 WB Polyurethane Gloss/Satin topcoats can be used over concrete, terrazzo, or existing coatings in flooring projects. Both breathable, low-odor, waterborne polyurethane floor topcoats are chemically resistant and exhibit UV stability. Light foot traffic is acceptable within 8 hr for 4408 and 6 hr for 4409, and both products offer water-based cleanup and custom color tinting.

Schaeffler Group USA, Inc.
Fort Mill, SC 29715
Sep 17, 2009 With Isotect® A coating, Rolling Element Bearings are insulated from damage caused by passage of electrical current in large AC or DC motors. Coating acts like resistor and capacitor connected in parallel and can be applied to outer or inner ring external surfaces. Depending on operating temperature, coating has resistance ranging from several ohms up to 10 GW. If operating conditions require higher protection, bearings can be assembled with ceramic rolling elements.

Dow Corning Corp.
Midland, MI 48686 0994
Sep 14, 2009 Offering adhesion to both primed and unprimed polyester films, solvent-free Syl-Off® System includes base coating, anchorage additive, choice of crosslinkers, and platinum catalyst. System uses thermal-cure technology and offers stability against both solvent and water-based acrylic adhesives. Applications include filmic pressure sensitive laminate and labelstock, polyester release films, and release liners for polyester technical adhesive tapes.

Master Bond, Inc.
Hackensack, NJ 07601
Sep 09, 2009 With ability to maintain low modulus over temperature range of -65 to +200°C, Master Sil 773 is formulated to provide protection to electronic circuitry in high humidity environments as well as upon exposure to shock and vibration. One part, ultra low viscosity silicone conformal coating can be applied by dipping, spraying, brushing. Coating offers volume resistivity of 1x10¹⁴ W-cm, dielectric strength of 25 kV/mm, dielectric constant of 3.3, 60 Hz and dissipation factor of 1x10^-4.

DuPont
Research Triangle Park, NC 27709-4425
Aug 28, 2009 Pre-manufactured with thickness uniformity, DuPont(TM) PerMX(TM) 3000 can cover or tent holes in substrate and provide reliable bonding in 5 min cycle. Negative tone, photodielectric epoxy material offers both corrosion and chemical resistance. With greater than 4:1 aspect ratio, straight vertical sidewalls, and thermal resistance, product is suited for applications in 3D, through silicon via, and wafer level packaging of electronic components and microelectromechanical systems.

Advanced Polymer, Inc.
Carlstadt, NJ 07072
Aug 28, 2009 Formulated as water-based hybrid resin system, API-278 Stain Blocking Polish(TM) provides deep-penetrating, high-gloss, stain-resistant finish for new densified concrete surfaces. It can be used as primary coating or as protective layer under traditional concrete polish systems. Surfaces coated with API-278, which forms non-sacrificial surface that can be buffed/burnished to high gloss, will exhibit resistance to wear, moisture, and staining.

Sto Corp.
Atlanta, GA 30331
Aug 28, 2009 Suited for rough openings and transition detailing in above grade wall construction, StoGuard RapidSeal(TM) eliminates mesh, fabric, and tapes when used with StoGuard coatings. One-component air barrier and waterproof material installs down to 33°F, cures in wet weather, and adheres to damp substrates without blistering or increase in drying time. Product is compliant with all national, state, and local VOC regulatory requirements, and qualifies for LEED credits.

Michelman Inc.
Cincinnati, OH 45236
Aug 28, 2009 Available in matte, satin, and gloss finishes, DigiGuard® UV Series cures and dries instantaneously when exposed to UV light to form protective surface on paper and film printed on HP Indigo presses. Solvent free material, able to be used to produce high gloss levels, offers protection against mechanical rubbing and is approved by HP for use on HP's UV Coater. Certain grades are also designed for optimal performance during subsequent hot-foil stamping, imprinting, or gluing.

Birchwood Casey
Eden Prairie, MN 55344 2138
Aug 25, 2009 Suited for manufacturers that require same-day black finishing of small lots of aluminum parts, mini BK-LC series safely blackens parts in-house and achieves satin black finish. LUMICLAD process, which takes ~30 min, utilizes dip-tank procedure to form black oxide coating on aluminum while utilizing only one heated tank and eliminating requirements for electrolytic current. LUMICLAD finish is 1.5 microns thick and will not shrink hole diameters or add measurable thickness.

Aremco Products, Inc.
Valley Cottage, NY 10989
Aug 25, 2009 Suited for applications to 1,500°F, Quartz-Coat(TM) 845-Blue is a cobalt-aluminate pigmented formulation that bonds well to glass and quartz halogen lamps. Single part, water-based, odorless, inorganic system is blue in appearance and is able to absorb and evenly diffuse light. Formulated to viscosity of 400-700 cp and solids content by volume of 61.0%, product is applied by dipping or spray equipment. After curing, finish is moisture-resistant, and no outgassing will occur.

Laticrete International, Inc.
Bethany, CT 06524 3432
Aug 17, 2009 Intended for interior/exterior applications over any substrate, Hydro Barrier(TM) load-bearing, self-curing, liquid rubber polymer can be applied for flexible, seamless waterproofing and anti-fracture protection up to industry standard of 1/8 in. It has load-bearing Extra Heavy service rating per ASTM C627 and accelerates installations by not requiring fabric in field and being ready for flood testing within 24 hr of cure. Microban protection also prohibits growth of mold and mildew.

Okazaki Manufacturing Company
Abercynon, Rhondda Cynon Taff   United Kingdom
Aug 13, 2009 Able to be applied in thicknesses exceeding 2.54 mm and up to 5.08 mm, SDC-4 plasma flame sprayed coating increases life of thermowells in critical Fluid Catalytic Cracking Units (FCCU) in oil refineries and also reduces associated maintenance/repair. Solution is applied to tip of thermowells, providing corrosion resistance in harsh operating temperatures and pressures. Coating does not alter/distort component or substrate.

Aremco Products, Inc.
Valley Cottage, NY 10989
Aug 11, 2009 Formulated using waterborne silicate binder system filled with blend of stainless steel and ceramic corrosion inhibiting pigments, Corr-Paint(TM) CP3015-SS is suited for coating carbon steel and cast iron heat exchangers, boiler components, and exhaust headers. Single part coating system is supplied in ready-to-use viscosity of 500-1,000 cP, is applied using conventional spray equipment, and dries to typical film thickness of 2-3 mils.

Industrial Nanotech, Inc.
Naples, FL 34108
Aug 07, 2009 Designed for sloped roofs, Nansulate® Crystal clear protective coating provides thermal insulation, as well as resistance to UV, mold, and mildew. Coating can be applied over colored tile, barrel tile, clay tile, slate, wood shingle, and asphalt shingle roofs to provide energy savings by minimizing heat transfer through roof.

Lanxess - Technical Rubber Products
Pittsburgh, PA 15275
Jul 30, 2009 Primal(TM) SB-110 and SB-155 waterborne polyacrylate dispersions can be used as sole binder in base coats or combined with select acrylic/polyurethane dispersions to obtain balanced property profile. Used to produce base coats for very soft leathers, Primal SB-110 is optimized for embossing properties, fastness to heat yellowing, cut-through resistance, and low surface tack. Primal SB-155 shares these properties but is suitable for high-covering base coats for embossed leather types.

Schaeffler Group USA, Inc.
Fort Mill, SC 29715
Jul 23, 2009 Designed for FAG cylindrical roller bearings and applicable to other roller bearings, Durotect® B increases bearing resistance during slippage, sliding, and alternating low-load conditions. This matte black, mixed iron oxide coating, measuring 0.4-2.0 µm thick, also promotes run-in behavior of bearings. At 10-20 µm thick, Durotect® P dark grey PTFE coating reduces friction and provides anti-wear protection of main rotor bearings by promoting sliding capacity of bearing outer ring.