Acrylic Coatings

Paints & Coatings, Chemical Processing & Waste Management, Green & Clean

Elastomeric Coating reduces heat in building interiors.

June 12, 2015

Formulated as protective weathering layer for low-slope roofs, WeatherCote™ Elastomeric Coating delivers 88% initial reflectivity that reduces wear and tear on membrane below and helps lower temperature inside building by directing heat and UV away from surface. This ENERGY STAR®-rated, water-based acrylic roof coating, applicable via spray, roller, or brush, adheres to such substrates as granulated BUR, SBS and APP, metal, wood, and concrete.
Read More

Materials & Material Processing, Paints & Coatings, Chemical Processing & Waste Management, Optics & Photonics

Haptic Display Glass resists fingerprints.

June 2, 2015

Featuring optimized thin film coating that offers smooth, hydrophobic surface to repel fingerprints, Vista AR™ Haptic Glass has low photopic brightness of less than 0.3%, providing durability and reflection control in demanding environmental conditions. Magnetron-sputtered coating is inorganic, stands up to 120 days in salt fog humidity chamber, and can perform in exposure to direct sunlight and subzero temperatures. Product tests at 8H–10H pencil hardness, making it scratch-resistant. Read More

Paints & Coatings, Chemical Processing & Waste Management, Green & Clean, Materials & Material Processing

Polymer Binders have environmentally friendly formulations.

April 11, 2014

Ecronova solutions are available for low-emission systems, interiors, primers, and low-filled systems. As solvent-free polyurethane/polyacrylic hybrid system, Ecrothan™ 2012 provides abrasion/chemical resistance and accelerates hardness development. Latter produces water resistance in floor coatings, parquet lacquers, and industrial coatings. Ecrylic™ KS 447 APEO-free styrene/acrylic emulsion produces corrosion protection in primer formulations and exhibits adhesion on various steel substrates. Read More

Paints & Coatings, Chemical Processing & Waste Management, Green & Clean

Conformal Coating helps manufacturers reduce VOC emissions.

February 26, 2014

Acrylic conformal coating, USTFA, facilitates and optimizes selective coating process. Able to adhere to difficult substrates, low-viscosity coating has UL94 V-0 flammability rating and meets requirements of IPC-CC-830. This single-component, 100% solids coating cures in seconds with conveyorized UV lamps or within 2 hr at 80°C. Multi-cure mechanism facilitates cure in shadowed areas: under 3 days at ambient temperatures and humidity (or accelerated by 30 minute bake at 80°C). Read More

Paints & Coatings, Chemical Processing & Waste Management

Autodeposition Coating suits iron castings and ferrous metals.

February 18, 2014

Formulated to deliver uniform, defect-free surface coating on both inside and outside of complex components, Bonderite® M-PP 930C™ provides corrosion and abrasion resistance, thermal stability, and edge protection. Water-based, epoxy-acrylic urethane coating will coat any surface it wets during immersion of parts with no limitation as to part size, shape, or density. Non-flammable, non-explosive, and RoHS-compliant, coating contains no toxic heavy metals, very low VOCs, and no APEs or HAPs. Read More

Paints & Coatings, Chemical Processing & Waste Management

Acrylic Coating adds protection, elasticity to canvas giclees.

December 11, 2013

Able to be provided with or without added UV protection, CV series water-based acrylic coating adds elasticity so that when canvas giclee is stretched onto wooden frame, printed aqueous ink does not tear when wrapping around 90° angle of frame. Finish provides soft gloss to canvas, and versions for manual application and automatic application are available. All materials used in manufacture of these coatings are considered non-hazardous. Read More

Paints & Coatings, Chemical Processing & Waste Management, Electrical Equipment & Systems

Electrically Conductive Coatings provide EMI shielding.

November 26, 2013

Specially formulated for application on plastics, 1-component Nickel-filled Acrylic Coating provides EMI shielding on electronic enclosures and assemblies where abrasion resistance is important, both external RF fields must be excluded, and internal radiated emission must be attenuated. Adhering to Kapton, Mylar, and glass, Epoxy-based Ink and Coating is resistant to flexing and creasing and is suitable for application by screen printing, dipping, and syringe dispensing. Read More

Paints & Coatings, Chemical Processing & Waste Management

Acrylic Coatings defend against wind, water, and fire.

January 3, 2013

Applied to Eco Red Shield™ protected wood surfaces, Eco Disaster Break™ Coatings form waterproof and seamless monolithic membrane that eliminates need for outdated protection methods such as felt paper or vapor barriers around windows, doors, and under roofing and siding. Acrylic coatings are Class A Fire Rated, UV-resistant, and non-toxic, minimizing risk of water, fire, and termite damage to wood framed structures. Read More

Paints & Coatings, Chemical Processing & Waste Management

Thermal Insulating Coatings provide safe-touch performance on hot pipes.

May 3, 2012

Formulated with Cabot's Enova® aerogel, Series 971 Aerolon Acrylic and Series 975 Aerolon Epoxy are fluid-applied, high-build coatings that respectively achieve 160 and 60 mils dry film thickness when spray-applied to piping, tanks, valves, or other steel substrates in industrial facilities. Hydrophobic formulations bond with high-performance primers for durable barrier that resists corrosion under insulation. Read More

Paints & Coatings, Chemical Processing & Waste Management, Green & Clean

Cool Roof Coating System helps optimize energy efficiency.

January 25, 2011

Comprised of Kynar Aquatec® resin-based topcoat and elastomeric acrylic basecoat, APV eCoolRoof(TM) optimizes emissivity and total solar reflectance properties of roof's surface. Low VOC product resists UV ray degradation, chalking, water pickup, dirt pickup, staining, and chemicals as well as corrosion, algae, and fungal growth. Field-applied and air dried, APV eCoolRoof meets or exceeds initial Cool Roof Rating Council requirements to reflect sunlight and heat away from structure. Read More

Paints & Coatings, Chemical Processing & Waste Management

Masonry and Stucco Primer has alkali-resistant formulation.

December 2, 2010

Fast drying KILZ® Masonry and Stucco primer can be used on recently poured masonry and stucco surfaces. It penetrates and binds light surface chalk, creating surface that is ready to be top coated, and is suited for use with interior and exterior above-grade masonry, stucco, plasters, and poured and precast concrete. Available in 5 gal containers, clear primer is 100% styrene acrylic, is alkali-resistant up to 13.0 pH, and lowers risk of lime burn, discoloration, and efflorescence. Read More

Adhesives & Sealants, Paints & Coatings, Chemical Processing & Waste Management

Acrylic Bonding Primer is formulated for galvanized metal surfaces.

October 14, 2010

Suited for galvanized steel and other non-ferrous metals, water-based Galoseal WB creates tenacious bond, which optimizes topcoat adhesion to galvanized metal surfaces. Low VOC formula accepts 2-component solvent-containing finishes such as epoxies and urethanes. Product contains no heavy metals or mineral acids and provides dry film thickness of 0.5-1.0 mils. Read More

Paints & Coatings, Chemical Processing & Waste Management, Green & Clean

Acrylic Conformal Coating has eco-friendly formulation.

January 12, 2010

Based on acrylic technology and bio-derived, ecologically-friendly solvent system, CONAP® CE-2290 does not require use of petroleum-based or reportable solvents and is free from hazardous air pollutants. Solvent portion is non-carcinogenic, biodegradable, and free of ozone-depleting solvents. RoHS-compliant and repairable, coating exhibits tack-free air drying time of 5 min @ 25°C and exhibits hydrolytic stability. It adheres to PCBs and electronic components. Read More

Material Handling & Storage, Paints & Coatings, Chemical Processing & Waste Management

Acrylic Polyurethane Coating features VOC of less than 50 g/L.

July 16, 2008

Meeting performance properties of solvent-borne systems without associated health and safety hazards, Aqua - Thane 2K water-borne coating exhibits abrasion, solvent, and chemical resistance including Skydrol, and maintains hardness. Film build of 4-8 mil wet is achieved without foaming, gassing, or flow problems. HAPS free system offers adhesion to steel, aluminum, galvanized metals (both electroplated and hot-dipped), and various stainless steel, PVC, and carbon/fiberglass composites. Read More

Paints & Coatings, Chemical Processing & Waste Management

Lightweight Coating creates polished/cut granite appearance.

April 30, 2008

Suited for new construction or renovation, StoCreativ® Granite acrylic-based interior and exterior wall finish is trowel-applied and comes in 10 colors. Use of this product, which is compatible with Sto Classic Wall Claddings (including Sto Classic NExT®), helps incorporate natural looks and colors in finished walls. Read More

Paints & Coatings, Chemical Processing & Waste Management

Conformal Coating is quick-drying and toluene-free.

December 21, 2007

Based on Hysol PC52 platform, Hysol® PC62 is one component solvent-based acrylic conformal coating that provides environmental and mechanical protection for printed circuit boards (PCBs). UL746 and IPC-CC-830 compliant product can be applied with non-atomized selective spray coating equipment, and is suited for harsh conditions in automotive, military, aerospace, industrial, and consumer avionics applications. Read More

Paints & Coatings, Chemical Processing & Waste Management

Acrylic Coating provides corrosion protection.

August 23, 2006

Organic, water-based VpCI(TM)-386 provides UV-resistance and corrosion protection for equipment, structures, and maintenance needs. It is appropriate for direct metal applications and can be used as single coat system or in conjunction with other primers and topcoats. Suited for indoor or outdoor conditions, non-toxic, low VOC system forms thixotropic coating that is resistant to sagging or running, forming non-flammable protective barrier against corrosive elements. Read More

Paints & Coatings, Chemical Processing & Waste Management

Acrylic Coating targets picture and poster framers.

June 23, 2005

Water-based Craquelure/Texture Coating adds dimension when applied on top of poster or 4-color lithographed print. Applied using brush or paintbrush roller, texture is added to make print look hand-painted. When using different applicator, print looks like it was painted on canvas. Available in matte, semi-gloss, and glossy finishes, coating comes in quarts, gallons, 5-gal pails, and 55-gal drums. Read More

Paints & Coatings, Chemical Processing & Waste Management

Acrylic Polyurethane Coating suits industrial applications.

January 24, 2005

Chemical-resistant Chemthane 3300 adds smooth, glossy finish to steel, iron, galvanizing, aged fiberglass, concrete, masonry, and wood substrates. Formulated in 1:3 mix ratio with pigmented acrylic enamel and polyisocyanate hardener, low-VOC coating can be applied by brush, roller, or single component airless pump. It is offered in various colors and exhibits resistance to acids, alkalis, humidity, and salts found in industrial applications. Read More

Paints & Coatings, Chemical Processing & Waste Management

Corrosion-Resistant Coating can be applied without primer.

February 20, 2004

High-gloss Iron Guard(TM) DTM Acrylic Enamel enables direct-to-metal application on new or cleaned metal. Low VOC, low odor enamel complies with current regulations and lowers emmissions. Gloss retention technology enables resistance to early moisture, chemicals, flash rust/early rust, and corrosion. Iron Guard is available in 13 package colors, 3 tinting bases, and 2 primers. Suitable substrates include steel, iron, aluminum, concrete, masonry, and wood. Read More