Master Bond, Inc.    Hackensack, NJ 07601
Sep 27, 2006 Medium-viscosity, 2-component EP30HT has 4:1 mix ratio by weight, is 100% reactive, and does not contain solvents or volatiles. It cures at room temperature or more rapidly at elevated temperatures. Serving as adhesive/sealant, coating, and casting compound, product adheres to metals, glass, ceramics, woods, vulcanized rubbers, and plastics. Optically clear formula has refractive index of 1.54 and spectral transmittance of 97%. It resists exposure to water, oil, and organic solvents.

Huron Technologies, Inc.    Leslie, MI 49251
Aug 30, 2006 Available in 5 gal pails and 55 gal drums, mold Release Coating 7137 is effective in applications that combine composite with fabric material in permanent structure. Low-maintenance product has water base, exhibits low build for cleaner molds, and handles up to 450°F mold temperature. It is effective for release of polyurea composites with fiberglass for automotive and truck interior components.

Dymax Corp.    Torrington, CT 06790
Aug 29, 2006 Available in gel, brush-on, or spray-on formulations, SpeedMask® UV Curable Masking Resin provides surface protection from contamination caused by acids, alkalines, plating solutions, and ambient debris from air plasma spray, HVOF, grinding, peening, and grit blasting. Single-component, temporary masking resin is solvent-free, non-flammable, urethane-based, and water-soluble, and easily peels, dissolves in water, or burns off once the surface treatment process is completed.

Goldschmidt Chemical Corp.    Hopewell, VA 23860
Aug 29, 2006 TEGO® Polish Additiv WE 50 is non-ionic, oil-in-water (O/W) emulsion system that combines concentrated, organo-modified, silicone-based emulsifier with natural avocado oil. It promotes gloss and color enhancement, water repellency, and long-term care for leather, wood, and plastic surfaces. In combination with thickening agents, product can also be used in polish creams for plastic surfaces. Highly concentrated O/W emulsion (50%) can be diluted with water.

Garon Products, Inc.    Wall, NJ 07719 1924
Aug 24, 2006 Providing gloss finish, Fast Cure(TM) Coating Systems set up in temperatures as low as 45°F in as little as 10-12 hr, and achieve full chemical resistance in as little as 3 days. Impact-resistant epoxy systems are low odor and VOC compliant in all 50 states, as well as OSHA compliant, USDA authorized, and EPA approved. Coatings are packaged in kits that include all components needed as well as detailed application instructions.

Cortec Corp.    St. Paul, MN 55110
Aug 23, 2006 Organic, water-based VpCI(TM)-386 provides UV-resistance and corrosion protection for equipment, structures, and maintenance needs. It is appropriate for direct metal applications and can be used as single coat system or in conjunction with other primers and topcoats. Suited for indoor or outdoor conditions, non-toxic, low VOC system forms thixotropic coating that is resistant to sagging or running, forming non-flammable protective barrier against corrosive elements.

Cortec Corp.    St. Paul, MN 55110
Aug 18, 2006 Utilizing soybean derivative methyl esters in conjunction with Vapor Phase Corrosion Inhibitor chemistry, EcoLine(TM) Long Term Rust Preventive provides up to 24 months of indoor protection and up to 6 months outdoor protection for multi-metal parts. Product cuts through surface contamination and other fluids, helping to loosen frozen and rusted areas. Compatible with environmental and user safety, natural smelling formula is VOC-free, non-flammable, and biodegradable.

Acheson Colloids Co.    Port Huron, MI 48060
Jul 27, 2006 Emralon® TM-008 waterborne fluoropolymer lubricant and anti-corrosion coating provides low coefficient of friction along with solvent resistance in permanent lubrication applications. Through consistent and uniform dip spin, spray, and electrostatic application performance, product allows for bulk coating of small parts requiring permanent lubrication. Use results in satin-like finish that imparts noise-suppression on fasteners and rubbing surfaces.

Dymax Corp.    Torrington, CT 06790
Jul 11, 2006 DYMAX 9008 chip encapsulant forms transparent layer that protects components and leads from moisture, dust, and other contaminants. Coating cures in 10-30 seconds under 200-1,200 mW/cm² intensity lights, enabling thicknesses to 1.5 mm to cure in UV conveyor belts at speeds of 2-4 ft/min. Cure depths to ¼ in. are possible. Coating adheres to variety of surfaces including glass-filled epoxy, metal and ceramic surfaces, as well as polyimide and other flex materials.

Victrex plc / Victrex USA Inc.    Greenville, SC 29615
Jun 27, 2006 Formulated with VICTREX® PEEK(TM) polymer, VICOTE(TM) Coatings exhibit scratch-, wear-, heat-, and chemical resistance and do not need primer during coating process. All materials are dishwasher safe and FDA-compliant. Coatings include 700 Series, comprised of powders for electrostatic coating, and 800 Series, which includes dispersions where thinner coatings are required or where difficult geometries must be coated. Pure VICTREX PEEK-based dispersion (VICOTE 804) is also available.

Heatbath Corporation    Springfield, MA 01102
Jun 23, 2006 Available in clear or light blue color, Alchrome® Tri-Tec coating for aluminum, aluminum alloys, and IVD deposited aluminum can be applied as spray or immersion. Aqueous coating features long-term corrosion protection and low electrical contact impedance and acts as bonding agent for paint and adhesives. Meeting Mil-C-5541 for Class 1 and 3, and ELV and WEEE standards, product is suited for automotive, aircraft, sport vehicle, architectural, and hardware industries.

Dow Corning Corp.    Midland, MI 48686 0994
Jun 23, 2006 Suited for LEDs used in diverse applications, silicone materials retain high light transmittance and optical clarity as they resist effects of high temperatures and short-wavelength exposures. Each silicone-based material enables SMT assembly of LED devices using lead-free solder and can they be formulated to adhere to variety of substrates. Materials include moldable SR-7010 resin as well as EG-6301, OE-6336, and JCR 6175 LED-protecting encapsulants.

Master Bond, Inc.    Hackensack, NJ 07601
Jun 22, 2006 Formulated to react with UV light and atmospheric humidity, UV71DC is suited for applications involving complex product geometries. Single-component product cures to produce optically clear, flexible, non-yellowing, and chemically resistant adhesive, sealant, or coating. Employed over -80 to +400°F range, compound exhibits thermal shock resistance and adheres to substrates from glass and aluminum to polyester films and polycarbonates. Tensile strength is 110 psi.

Sherwin-Williams Co. c/o Ultimate Lead Systems    Berea, OH 44017
Jun 15, 2006 Corothane® I Moisture Cure Coatings can be matched to wide range of colors in large and small batches. They include topcoats and zinc-rich primers that are designed for temperatures down to 20°F or high humidity applications. Providing abrasion and chemical resistance, single-component, VOC-compliant coatings are suitable for water tanks, clarifiers, and secondary containment.

Sherwin-Williams Co. c/o Ultimate Lead Systems    Berea, OH 44017
Jun 15, 2006 Macropoxy® 646 NSF Fast Cure Epoxy and Macropoxy® 846 NSF Winter Grade Epoxy are polyamide coatings formulated to meet toxicological and extraction test requirements of ANSI/NSF Standard 61. Macropoxy® 646 is suited for steel and concrete structures, while Macropoxy® 846 can be applied at temperatures as low as 35°F. Both are high solids and VOC-compliant. They can be brushed, rolled, or spray applied and are suited for use in water and wastewater treatment industries.

PKG Equipment Inc.    Rochester, NY 14624
Jun 07, 2006 Rhino seamless, spray-on, polyurethane linings help extend maintenance cycles by protecting against impact, abrasion, permeation, and corrosion. They also provide safety attributes such as vibration dampening, sound attenuation, and slip resistance. Non-porous linings are 100% solids tack-free within 40 sec, and adhere to various substrates regardless of shape or size. Flexibility prevents splitting, cracking, and de-lamination.

Premix Thermoplastics, Inc.    Milton, WI 53563
May 31, 2006 Available in any thermoplastic resin system, PRE-ELEC® EMI materials are one-step solutions that provide upwards of 90 dB shielding effectiveness. Compounds are offered in PP, ABS, POM, PC, PBT, PA-6, PA-66, PPS, PSul, PES, and PEEK. While products utilizing stainless steel fiber additives are available in fully compounded or dry blended forms, compounds using carbon fibers or nickel coated carbon fiber additives are available in fully compounded forms only.

Huron Technologies, Inc.    Leslie, MI 49251
May 30, 2006 Designed for heat cured silicone rubber applications, EZR-311 semi-permanent, water based mold release coating produces high quality molded parts such as automotive engine gaskets and electrical insulators. It can be used at mold temperatures of 320-360ºF. EZR-311 works with single or multiple mold cavities and is available in 5-55 gal drums.

ICS Garland Inc.    Cleveland, OH 44125
May 24, 2006 Providing protective overlayments for concrete and topcoat for decorative applications, Chemi-Cote(TM) UR 9100 is VOC compliant, virtually odorless, and can often be applied without shutting down operations. Coating is resistant to many chemicals including aromatic and aliphatic hydrocarbons, chlorinated solvents, hydraulic fluids, jet fuel, acids, alkalis, alcohol, detergents, salts, and cutting oils. Chemi-Cote(TM) UR 9100 is suited for loading docks, warehouses, and aisle ways.

Michelman Inc.    Cincinnati, OH 45236
May 23, 2006 BugBan(TM) 9000 is water-based, repulpable coating for paper and paperboard substrates that can be applied on corrugated or folding carton either off-line or in-line, using Rod, Blade, Flexo, Gravure, or Size Press application methods. EPA approved product is suited for applications including outside of corrugated surfaces, folding cartons, and wood and corrugated pallets used in transporting of food.