GE Advanced Materials
Wilton, CT 06897
Apr 27, 2006 Eliminating use of methylene chloride, Boron Nitride (BN) Spray II coating contains high-purity, high-crystalline grade of BN that imparts optimal lubrication properties. Non-reactive formulation exhibits high-temperature resistance, optimal release qualities, and chemical stability. Product is suited for use as release agent and lubricant in applications from metalforming and glassmaking to plastics molding, high-temperature sintering, and welding and brazing.

JohnsonDiversey
Sturtevant, WI 53177-0902
Apr 25, 2006 High-solids, low-odor High Mileage provides optimized gloss build and offers black heel mark/scratch resistance. Up to 5 coats can be applied in one application without signs of stressing. Finish performs well in less-than-ideal environmental conditions such as high or low humidity. Its properties make it suited for 24-7 facilities such as hospitals or retail environments with busy aisles and hallways.

Aremco Products, Inc.
Valley Cottage, NY 10989
Apr 13, 2006 Single-part, gray-pigmented Corr-Paint(TM) CP2020 polymeric coating dries and cures at room temperature to hard, non-porous, abrasion-resistant surface that is also resistant to hydrochloric, nitric, ethylene chloride, and sulfuric acids. Supplied with viscosity of 200-240 cps, product features specific gravity of 1.05 gm/cc. It provides corrosion resistance on steel components and structures exposed to oxidation and corrosive atmospheres up to 400°F.

Huron Technologies, Inc.
Leslie, MI 49251
Apr 07, 2006 Mold Release Coatings 6944, 7123, and 7153 provide clean mold release for composite friction materials such as automobile and truck brake composite products. Coatings are non-silicone, water based, dilutable concentrates available in 55 gal drums and 275 gal totes.

Nanophase Technologies Corp.
Burr Ridge, IL 60521
Mar 31, 2006 NanoTek® alumina polishing products feature nanoparticles which are approximately 80 nm. Products are available in aqueous dispersions that are stable in pH range from 4-10, and dispersions in other solvents are available for specialized applications. Alumina nanoparticles are suited for electronics, displays, and optical polishing applications.

ERSystems, Inc.
Rockford, MN 55373
Mar 31, 2006 Able to adhere to existing fluoropolymer-based paints used on metal roofs, ER KynaKote coating exhibits color retention as well as resistance to mildew and stains. Physical properties improve as it is exposed to sunlight. Eraguard 1000 QC quick cure coating dries independent of humidity, while Eraguard CleanCoat coating incorporates Teflon and Kynar to provide reflective surface that is resistant to dirt.

ZRC Worldwide
Marshfield, MA 02050
Mar 31, 2006 Suited for application in areas where VOC levels are strictly monitored and controlled, single-component ZRC-221 delivers anti-corrosion properties in one coat while exhibiting environmentally friendly volatile solvent level of 221 g/L. It meets VOC standards in all 50 states and requires minimal surface preparation. Coating resists continuous temperatures up to 350°F and intermittent temperatures up to 750°F.

Dampney Co., Inc.
Everett, MA 02149
Mar 29, 2006 Thurmalox® Stove Paint is fast drying, long lasting, and heat resistant silicone coating for stove, stovepipe, and hearth accessories. Available in variety of colors, it resists blistering, peeling, or flaking. Product comes in aerosol spray cans for application on fireplace andirons, screens and grates; barbecues; gas grills; and hibachis.

ZRC Worldwide
Marshfield, MA 02050
Mar 29, 2006 Requiring minimal surface preparation, ZERO-VOC ZRC combines best features of organic and inorganic zincs, and is solvent-free. Environmentally friendly, one-coat system cleans up with water, is heat resistant to 1,200°F, and meets VOC standards in all 50 states.

Cotronics Corp.
Brooklyn, NY 11232
Mar 17, 2006 Packaged in dispensing cartridges, 450°F Instant Metal 7056AL forms solid metallic aluminum layer that adheres to smooth, rough, or porous surfaces as well as most plastics, metals, ceramics, glass, and wood. It cures in 4-8 min at room temperature without objectionable sulfur odors. Once cured, metallic composite is machinable with standard tools and can also be tapped, drilled, and threaded.

Chemline Inc.
St. Louis, MO 63103
Mar 16, 2006 Engineered for wood, plywood, particle board, and corrugated structures, 2-component CHEMTHANE 7035 consists of 100% solids elastomeric polyurea that cures in 6-8 sec. It is sprayed directly to prepared wooden substrate to form seamless, plastic barrier against abrasion, impact, and tearing. Product also hides seams and imperfections in prepared surface without excessive epoxy mastics, Bondo® application, or sanding.

Henkel Loctite Corporation
Rocky Hill, CT 06067
Mar 08, 2006 Formulated for use with CSP and BGA packages, Loctite® 3549 underfill protects solder joints against shock, drop, and vibration. Material has been tested to JEDEC drop test standards on 0.4 and 0.5 mm lead-free devices. Compatible with lead-free solder materials, underfill is completely reworkable and features a pot life of 14 days at room temperature and 7 days at 40°C processing temperature.

Chemline Inc.
St. Louis, MO 63103
Jan 31, 2006 Containing no solvents, CHEMTHANE 2261 100% solids, zero VOC, 2-component polyurethane coating can be air-sprayed directly in thicknesses from 40-60 mils without additional primer. It features Shore D hardness of 75 and cure time of less than 5 minutes at 77°F. Formulated to have balance between cold-temperatures and heat resistance, coating resists cracking and delamination while also providing microbe resistance.

Birchwood Casey
Eden Prairie, MN 55344 2138
Jan 31, 2006 With processing time of 25 min, TRU TEMP black oxide finishing system operates at 200°F, eliminating splattering and boilover hazards. Nonpolluting system is free of EPA regulated chemicals and uses mild solutions that prevent formation of red coatings and white salt leaching. Suitable for finishing tooling components such as toolholders, workholding, and turret press tooling, it can process small parts in bulk loads while larger tools can be finished on racks.

Lund International Corporation
Hudson, MA 01749
Jan 26, 2006 Able to be applied 2 ways with thicknesses from 0.002-0.100 in., BrazeCoat(TM) is low-porosity (less than 1%) hardfacing material with carbide densities up to 70% by volume embedded in metallic matrix. Metallurgically bonded to base metal, resulting coating can achieve over 65 Rockwell C hardness values to withstand abrasive wear in high-impact applications. Actual coating particles can be tungsten carbide, chromium carbide, or combination thereof.

Hacker Industries, Inc.
Newport Beach, CA 92660
Jan 25, 2006 Featuring built-in color identifier to comply with ASTM standards, Hacker TopCoat strengthens bond between Hacker floor underlayments and floor covering adhesives. Product serves to enhance surface of underlayments and prepares surface for application of finished floor coverings. Underlayments can receive coating of ASTM F 2419-compliant TopCoat soon after application, and finished floor coverings can be attached when underlayment is dry (7-10 days typ).

Friction Control Solutions, Ltd.
Tirat Hacarmel 39120  Israel
Jan 25, 2006 Super-Finishing produces low roughness while hardening metal surface using single mechanical process. Mechanical lapping process creates organic layer that bonds into metal surface through chemical reaction, affecting surface roughness average, mean roughness depth, amplitude, and bearing area curve. Environmentally friendly solution does not use hazardous waste materials and can be applied to cylindrical parts, flat surfaces, and various metals.

Rust-Oleum Corp.
Vernon Hills, IL 60061
Jan 18, 2006 Thermakrete(TM) urethane coating shields industrial floors against thermal shock in -10 to +240°F temperature range. Capable of seamlessly expanding and contracting to resist cracking, it withstands caustic washdowns, heavy traffic, abrasion, chemicals, and standing water contamination. Each 3-component kit cures in less than 72 hr without need for primer or sealers. Available in 3/16 or ¼ in. thicknesses, it can be used in USDA facilities based on FSIS Directive 11,000.4.

Electrolube (A division of HK Wentworth Ltd)
Swadlincote, Derbyshire DE11 0AN  United Kingdom
Jan 12, 2006 Water-based Aquacoat Plus eliminates need for extraction and other precautions required for application of solvent-based conformal coatings. Non-flammable, low-VOC product contains no isocyanates and can be soldered through without producing toxic gases. Based on polymeric materials, phenol-free product is non-corrosive to cadmium and zinc plate. It comes in 2 formulations: WBP as standard and WBPS (Sprayable) for use in selective film coating equipment.

International Paint Co.
Houston, TX 77210
Jan 05, 2006 Designed to meet needs of steel fabrication industry, Intershield single pack non-slip polymer coatings are pre-mixed with precise amount of aggregate for application directly from can. Solvent-based Intershield 584 suits fabricators not impacted by strict VOC regulations, while Intershield 584HS complies with VOC regulations. Water-based Intershield 571 ultra-low VOC solution is formulated in clear finish, while Intershield 818 has peelable formulation.