Performance Coatings International
West Caldwell, NJ 07006
May 23, 2007 Resistant to abrasion and chemicals, optically clear LensGuard coatings are suited for use on polycarbonate, CR-39, and other polymeric substrates used in ophthalmic industry. Series includes 5 tintable and 5 non-tintable coatings. Products protect against scratches to promote longevity of lenses and will not peel or flake off under normal wear and tear. Also, formula facilitates cleaning of smudges and smears from surface.

Performance Coatings International
West Caldwell, NJ 07006
May 23, 2007 Vueguard® 931-AF, 932-AF, and 933-AF allow display lenses or windows to withstand increased levels of moisture and heat without fogging. Along with abrasion resistance and optical clarity, these solvent based, UV-curable coatings exhibit degree of surface slip that facilitates surface cleaning. Vueguard 931-AF is suited for gauges and lenses, and all fog-resistant coatings suit applications such as marine, appliances, aerospace, and equipment indicating units.

Stainless Steel Coatings, Inc.
South Lancaster, MA 01561
May 18, 2007 Capable of withstanding continuous 2,000 hr salt spray test, STEEL-IT® Stainless Steel Coatings feature 316L stainless steel leafing pigment, which creates durable finish to protect steel structures above waterline. Corrosion-resistant products are offered in epoxy-based formulation or polyurethane-based version for withstanding direct, prolonged UV exposure. Applied by brush, roller, or spray gun, paints feature metallic satin gray finish that will not chip, peel, or flake.

Aremco Products, Inc.
Valley Cottage, NY 10989
May 11, 2007 With operating temperatures up to 400°F, single-part Corr-Paint(TM) CP2000 dries and cures at room temperature to hard, non-porous, abrasion-resistant surface. Polymeric coating is resistant to hydrochloric, nitric, ethylene chloride, and sulfuric acids. Supplied with viscosity of 200-240 cps, product is applied in 4.0 mil wet film thickness that dries to approximately 2.0 mils. Application methods include brush, roller, or pneumatic spray equipment.

Valspar Corp., The
Wheeling, IL 60090
May 03, 2007 Descoglas® RF reinforced wall and ceiling coating system connects unlike substrates without use of joints or sealants, creating smooth and seamless environment. High-build surfacing system eliminates corners, cracks, and crevices that could harbor dirt and bacteria. With 100% solids, fiber-filled thermosetting resin, system creates static-resistant surface that offers dimensional stability as well as resistance to impact, abrasion, thermal shock, and chemicals.

Sulzer Metco
Westbury, NY 11590
May 03, 2007 Boron-free braze alloys AMDRY®105, AMDRY®108, and AMDRY®805 are suited for joining applications for heat exchangers, catalytic converters, and EGR coolers. Composed from minimum of 23% chromium by weight, alloys produce corrosion resistant joints for steel, stainless steel, and superalloy components. AMDRY®105, AMDRY®108, and AMDRY®805 feature phosphorous rather than boron, and are offered in powder, paste, and custom-sized tape forms.

Valspar Corp., The
Wheeling, IL 60090
May 01, 2007 Applied in commercial and institutional facilities, UR-22 EnviroUltra® WBU is designed for use over epoxy (floor) or wall base coats in environments subjected to chemical exposure and abrasive wear. This 60% solids, water-based urethane topcoat produces glossy, stippled finish that exhibits UV stability and graffiti resistance. While offered as clear coating, product can take on various colors when used in conjunction with UR-4 Urethane Color Additive.

Aremco Products, Inc.
Valley Cottage, NY 10989
Apr 25, 2007 Pyro-Paint(TM) 634-ZO is zirconium oxide-filled, water-based, chemically resistant refractory coating used to extend life of ceramic, graphite, and metal crucibles and molds used in foundry applications. Resistant to wetting by range of metals, VOC-free solution provides erosion resistance and dries at room temperature within hours (within 2 hr @ 200°F). Dry films up to 5-10 mils can be produced without cracking, and cured films are more than 95% pure zirconium oxide.

Sherwin-Williams Co. c/o Ultimate Lead Systems
Berea, OH 44017
Apr 25, 2007 Duraplate® UHS (Ultra High Solids) Epoxy, featuring fluorescing Optically Active Pigments (OAP), allows tank lining applicators to check coating instantly for pinholes, holidays, and other discontinuities as well as uniform coverage and film thickness verification. Illuminated under UV-light, product is offered as single- or multi-coat solution and meets requirements of NSF Standard 61 for potable water tanks of at least 1,000 gal. Cure time is 3 days.

SEI Chemical
Northridge, CA 91324
Apr 20, 2007 Available in bulk or aerosol, GPA-300 Graffiti Proofer® is nanotechnological, permanent, and water-clear coating that does not allow paint, permanent markers, stickers, graffiti, or any other markings to bond to dry film. Non-stick, chemically resistant product can be used on any type of surface and exceeds performance requirements for ASTM 6578 Graffiti Resistance Test. If coating is ever damaged, it can be repaired by re-spraying surface.

Tempil, Inc.
South Plainfield, NJ 07080
Apr 17, 2007 Bloxide aluminized rust-preventive weld-through primer is used to protect steel surfaces from rust where extended periods of outside storage are anticipated. It protects prepared edges and surfaces prior to welding and other heat-joining methods, eliminating need for secondary weld preparation on steel parts. It can be applied by brush, dip, or spray, is temperature-resistant to 800°F, and meets California requirements of less than 1.00 MIR (maximum incremental reactivity).

GE Company GE Plastics
Pittsfield, MA 01201
Apr 10, 2007 Able to replace metal substrates in powder coating applications, environmentally responsible Noryl GTX(TM) resins contain conductive fillers that eliminate need to apply electrostatic primer. Grades make it possible to powder-coat metal and plastic on same production line, and can eliminate chemical cleaning and pretreatment of metallic parts when used as substrate. Products consist of polyamide blend with modified polyphenylene ether reinforced with conductive filler packages.

Nano Chemical Systems Holdings, Inc.
Seaford, DE 19973
Mar 29, 2007 Virtually transparent to visible light, TiO2(TM) (titanium dioxide) delivers sun protector factor of up to SPF 50 to prevent fading and cracking on rubber, vinyl, and leather automotive surfaces. Slight blue haze, visible during application, indicates that nano-enhancement is present and working to absorb UV rays and convert them into harmless heat energy in order to protect underlying surfaces.

TENNANT
Minneapolis, MN 55426
Mar 16, 2007 Addressing needs within food and beverage plants, Eco-CWO minimizes odors and food borne illnesses caused by bacterial growth. One-coat, seamless coating provides resistance to thermal shock, chemicals, and slips. Water-borne urethane is virtually odor-free and contains no VOCs. Offering UV light resistance, Eco-URE epoxy coating can be used to prime, build, or topcoat flake or quartz flooring. It is suited for automotive showrooms, retail aisles and lobbies, and education classrooms.

Cortec Corp.
St. Paul, MN 55110
Feb 28, 2007 Designed for cooling towers or closed- and open-loop recirculating cooling systems, S-14 Bio protects carbon steel, galvanized steel, aluminum, copper, and other nonferrous metals from corrosion while also providing anti-scaling control. This 91% biobased, environmentally friendly additive has non-toxic, readily biodegradable formulation and incorporates Vapor phase Corrosion Inhibiting (VpCI(TM)) Technology. It is compatible with most water treatment programs.

Acheson Colloids Co.
Port Huron, MI 48060
Feb 28, 2007 Consisting of one-component, thermosetting graphite coating, Dag® EB-020A provides controlled electrical properties for alkaline battery applications. Water-based formula is particularly useful in solvent-prohibited areas. Coating adheres to smooth-surfaced, nickel-plated steel, maintaining conductive surface on current collectors. It also provides chemical resistance to KOH electrolyte, minimizing corrosion and oxidation.

Cortec Corp.
St. Paul, MN 55110
Feb 28, 2007 Developed for parts and equipment in power generation, aviation, chemical, refinery, and offshore drilling industries, Cortec® VpCI(TM)-371 protects against corrosive attack and metal fatigue brought on by extreme heat. Single-component, air cure coating offers aluminum appearance without any hard settling of aluminum. Its 9H pencil hardness helps resist abrasion from grit, sand, and rocks. Formulation also exhibits 1,000 hr salt spray resistance.

Valspar Corp., The
Wheeling, IL 60090
Feb 22, 2007 Combining chemical resistance and UV stability, CRU-340 features mixed VOC of less than 340 g/L, making it compliant in all OTC states. High-gloss formula provides UV light resistance as well as abrasion resistance, critical for high-traffic flooring. Available in clear or pigmented finish, coating is suited for new and existing concrete floors in industrial, aviation, institutional, and commercial operations. It allows for recoat in 12 hr and light foot traffic in 24 hr.

Deposition Sciences, Inc.
Santa Rosa, CA 95403
Feb 19, 2007 Suited for applications in general lighting, medical systems, digital imaging, LED lighting systems, and portable optical systems, HeatBuster® Spectral Metal Thin Film Coating meets severe abrasion, adhesion, humidity, and salt fog tests of Mil-C-675 standards. Stable over temperature and humidity changes, dichroic hybrid coating operates over range of angles, and is designed to be highly reflective over selected bands of wavelengths and minimally reflective over rest of the spectrum.

Master Bond, Inc.
Hackensack, NJ 07601
Feb 09, 2007 Suitable for use in both thick/thin sectioned configurations, EP21TDC-2LO bonding, sealing, coating, and encapsulation system has thermal conductivity of 9 BTU/in./ft²/hr/°F and volume resistivity of 1,012 Wcm. With service operating temperature range of 4 K to 250°F, room temperature curable product features Shore D hardness of 36, elongation of 50%, 1:3 mix ratio by weight or volume, working life of 90 min for 100 g mass, tensile strength of 1,070 psi, and T-peel strength of 15 pli.