ITW Muller
Arlington Heights, IL 60004
Nov 11, 2009 Capable of wrapping up to 150 loads per hour, Octopus(TM) 808 Twin Automatic Rotary Ring Series features dual film carriages that operate simultaneously to double wrapping speed and to independently to provide optimal load containment. Machine can be programmed to continue wrapping utilizing single carriage if film break occurs. It is available with optional roll changer for automatically replacing depleted or broken film rolls.

Standard-Knapp, Inc.
Portland, CT 06480
Sep 01, 2009 With single, double, and three lane configurations, Tritium(TM) Multipacker arranges products into compact multi-pack patterns and wraps them in printed or registered film. Bundler features Robo-Wand wrapping section, servo-driven film cutting system, wrinkle-free bull's eye and bottom seal, and pull-out film feed module. Modular stainless steel bundler comes equipped with transparent, safety-interlock gull wing guard doors which provide clear view of all moving belts and chains.

GaleWrap
Douglasville, GA 30134
Aug 19, 2009 Able to upgrade from manual to semi-automatic machines as customers' needs change, Yellow Jacket 110® Series secures any standard, oversized, or odd-shaped palletized loads on forks of forklift. Simplified design results in minimal maintenance, while film carriage allows for fast, ergonomic loading. Designed to plug into 110 V outlet, machines stretch wrap most loads in 3 minutes or less.

Schneider Packaging Equipment Co., Inc.
Brewerton, NY 13029 0890
Aug 19, 2009 Stack and Wrap Palletizing Cell integrates stretch wrapping and builds unit load on stretch wrapper, enabling load to be wrapped while it is stacked. It can simultaneously palletize different lines with different size and type products. Using FANUC robotic arms and end-of-arm tooling that enables consolidation of case, tray, or bag lines onto one central palletizing system, configurable system can be customized to meet specific floor plan requirements and operational needs.

Lantech Inc.
Louisville, KY 40299-2316
Aug 18, 2009 Designed for inline use with high-speed palletizers, Conveyorized Straddle Machine can wrap loads to 110 in. high and is rated at 60-80 pallets/hr. No-Film-Break technology provides metered film payout and enables machine to wrap partial layers while eliminating pulling, crushing, or deformation of load. Utilizing 225% pre-stretch as standard, machine is suited for wide range of consumer goods and beverages shipped in display packs as well as order-picked loads of mixed goods.

GaleWrap
Douglasville, GA 30134
May 29, 2009 Offering surface protection for coils, wire coils, and other coil products, Yellow Jacket Stinger(TM) Series eliminates hand wrapping, banding, and strapping, minimizing injuries and manpower needed to secure loads for shipping. Wrapper is available in Eye to the Sky and Eye Horizontal configurations, as well as semi-automatic and automatic versions.

GaleWrap
Douglasville, GA 30134
Mar 20, 2009 Designed to eliminate hand wrapping, banding, and strapping, Stinger(TM) Series wraps variety of product configurations for metal extrusions, lumber, building products, tubing, doors, windows, textiles, and insulation applications. Products are unitized and protected against damage, dust, and wind. Manual, semi-automatic, and automatic options are available for most ring sizes.

ARPAC
Schiller Park, IL 60176
Oct 30, 2008 Suited for high speed production lines, RTAC-4Q3 Rotary Arm Stretch Wrap System indexes, automatically wraps and discharges loads without operator assistance. It features touch screen Allen Bradley HMI, 6 ft tall fenced guarding, remote NEMA-12 electrical enclosure, and AC motors and controllers. Other features include heavy duty conveyors with 2.5 in. rollers, analog proximity switch dancer bar control, and 36 in. dia precision steel ring rotary arm support/drive system.

Lantech Inc.
Louisville, KY 40299-2316
Aug 07, 2008 Providing tailored wraps on narrow or wide pallets, Lan-ringer® Stretch Wrapper is suited for packaging heavy, odd-shaped, unstable loads up to 4,000 lb. Film delivery system, mounted on 40, 60, 75, or 90 in. ring, wraps product as it moves through production process on conveyor. With Power-Thru® conveyor, product and conveyor can be wrapped simultaneously for stability. Overwrap machine is suitable for protecting windows, doors, ladders, PVC pipe, and printed materials.

ARPAC
Schiller Park, IL 60176
Jul 22, 2008 Providing 5-sided pallet coverage without top sheet, COVER-PAL 6000® Stretch Hood Pallet Covering System minimizes risk of environmental damage from dust and water. Brand messaging can be printed directly onto film, and transparent pallet cover enables labels to be read without removing film. Equipped with Allen Bradley® controls, machine is suited for indoor and outdoor products destined for storage in cost clubs, home centers, construction sites, and freight centers.

EDL Packaging Engineers, Inc.
Green Bay, WI 54304
Apr 22, 2008 Designed to totally enclose large items such as wood products, cabinets, and furniture, inline Protecta Pack Hibrid System applies sleeve of poly foam, bubble wrap, LDPE, or high abuse film to protect top, bottom, leading, and trailing faces and edges of package. Stretch film is then wrapped horizontally around pack to secure over wrapped sleeve in place and to fully enclose pack. Outer layer locks protective film around edges and corners of package where it is most vulnerable.

ARPAC
Schiller Park, IL 60176
Mar 25, 2008 Equipped with 72 in. dia turntable, conveyor-less, single-station PA Series allows entire wrap sequence to be completed without forklift operator getting off truck. Operator sets pallet onto turntable platform and activates wrapping cycle from remote pendant with emergency stop feature. Upon completion of cycle, system automatically clamps, cuts, and secures film to pallet to prevent it from unraveling. PA-Series is completely portable when used with portable air compressor.

Advance Lifts, Inc.
St. Charles, IL 60174
Mar 11, 2008 Designed to use sophisticated stretch wrap film, semi-automatic Series 300 features powered prestretch carriage and allows standardization of wrapping procedures. Standard prestretch is 200% with options for 260% or 300% prestretch ratios. Intended for less expensive stretch wrap film, semi-automatic Series 200 produces consistent loads.

Lantech Inc.
Louisville, KY 40299-2316
Mar 03, 2008 Designed for automated conveyorized operation, Model S-2500 can be used in-line, end-of-line, or freestanding to allow load accumulation. It handles loads up to 58 in. square x 80 in. tall, and provides automatic load indexing, film attachment, cutting, and wiping. Touchscreen control incorporates Lan-Logix interface for programming wrap parameters. Power Roller-Stretch® Plus film delivery system pre-stretches film up to 300%, while diagonally opposed 2-column chassis provides stability.

GaleWrap
Douglasville, GA 30134
Feb 29, 2008 Measuring 114 x 96 x 98 in., Standard Manual Model Yellow Jacket 110® secures palletized loads directly on forks of forklift. Horizontally positioned stretch-wrap dispenser moves around and under load as Yellow Jacket 110 is manually advanced across length of load. Featuring adjustable tensioning for range of 0-150% film post stretch, product can wrap standard pallet size up to 68 in. diagonal and uses any machine-grade film up to 20 in. wide.

Lantech Inc.
Louisville, KY 40299-2316
Jun 26, 2007 Started via remote lanyard, Q-400XT automatically attaches film to load, wraps it, locks load to pallet with Pallet-Grip® film cable, and cuts film. Simple Automation(TM) eliminates need for fork-truck operator to touch load or machine. Designed to wrap 35-45 pallets up to 80 in. tall per hour, all-electric unit eliminates pneumatics and runs on 115 V power. Other features include Power Roller-Stretch® PLUS film delivery system and 15 rpm turntable with load capacity to 5,000 lb.

ARPAC
Schiller Park, IL 60176
Apr 11, 2007 Designed to maximize stretch film usage while ensuring load unitization, semi-automatic Pro-Series is available with high-profile turntable for forklift loading or low-profile turntable for pallet-jack loading. It can be customized with extended towers for taller loads and split frames for odd sized loads. System includes top over wrap control, cycle pause, photo-eye to see dark loads, and dual LED top and bottom wrap counters, each with range of 1-9 wraps.

EDL Packaging Engineers, Inc.
Green Bay, WI 54304
Feb 16, 2007 Protecta Pack Hibrid system applies sleeve of poly foam, bubble film, LDPE, or high-abuse film to protect top, bottom, leading, and trailing faces of package. After that, it applies horizontal wrap of stretch film to fully enclose and hold protective material in place. Non-abrasive film protects surfaces/finishes and can be clear to promote product visibility. Machine operates on various product sizes at random and tensions flexible material to shape and size of product.

Lantech Inc.
Louisville, KY 40299-2316
Dec 20, 2006 Capable of cycling pallets in 18-22 sec, automatic and conveyorized RS-6000 employs 60 rpm, mechanically powered film delivery head that can wrap loads with 50 ga film, pre-stretched 250% or more, without film breaks. System features Ring-Straddle(TM) design and can handle 180-200 loads, measuring up to 50 x 50 x 80 in., per hour. Cut-and-clamp system uses heat-free film sealing system and has cut/clamp/seal cycle of 1.5 sec. Also included, Pallet-Grip® system locks load to pallet.

Wulftec/M.J. Maillis Group
Ayer's Cliff, QC J0B1C0  Canada
Sep 15, 2006 Able to process 120 loads per hour, Wring-500 Automatic Rotary Ring Wrapper offers different wrap patterns and one-way wrapping, as well as banding and split wrap capabilities. Radio frequency technology minimizes maintenance, while carbon fiber ring provides resistant, optimized response to speed change.