Graco Inc.    Minneapolis, MN 55440
Feb 26, 2013 Designed for reliability and flexibility, InvisiPac™ Tank-Free™ Hot Melt Delivery System includes vacuum feed system, in-line melt chamber, heated hose, and applicator. Tank-free design minimizes time adhesives spend at high temperatures, reducing char and nozzle plugging, eliminating need for scraping, and lowering maintenance requirements. Start-up times are ~10 min or less, and areas of use extend to various other hot-melt sealing applications.

MDC Engineering    Sarasota, FL 34234
Feb 20, 2013 Capable of 15 cycles/minute, Automated Tray Sealer with Full-Punch allows product manufacturers to fill, seal, and punch out finished package using multiple-up preforms. Machine registers pre-printed top film to individual cavities prior to cutting and can process multiple blisters simultaneously.  Full-Punch Match Metal Dies are suitable for cutting clean round corners, hole punches, and other intricate shapes with no film overhang or rough edges.

Herrmann Ultrasonics, Inc.    Bartlett, IL 60103
Jan 23, 2013 In one step, HiQ MPW transports membrane belt by conveyor, punches membrane contour, and welds membrane onto part, saving material and cutting cycle time to less than 2 seconds per weld cycle. Modular Weld Punch machine is equipped with vacuum monitor that checks whether membrane is correctly punched and positioned. Machine control also features gentle conveyor transport with splice check, which minimizes other sources of error and potential production downtime.

EAM Mosca Industries    Hazleton, PA 18201
Nov 26, 2012 Equipped with thermostatically controlled heat seal or Sonixs ultrasonic welding technology, ROMP-6 Evolution can apply polypropylene strapping in widths of 5–12 mm at speeds up to 52 cycles/min. Design includes side or front coil loading, push-button strap threading, and fully enclosed strap feed track. Moving elements are designed with sealed bearings in open lever style construction that eliminates sensitivity to dust and dirt. For portability, machine rides on 2 fixed and 2 lockable casters.

Axon Corp.    Raleigh, NC 27603
Nov 06, 2012 ThermoPoint® steam-heat tunnels, integrating Category 3 safety-interlock system, also feature heat zone graduated dials and steam injector adjustment indicators for shrink process control and repeatability between batches. Each heat zone can be independently adjusted to deliver steam to label or band at different rates, heights, and angles. Tunnels are available in 3- or 6-zone configurations. They are also designed to minimize changeover time between products.

Crown Holdings, Inc    Philadelphia, PA 19154-4599
Sep 21, 2012 Designed to seal glass jars and bottles, Smart Capper™ offers adjustable running speeds, making it suitable for small- and medium-sized manufacturers that need to manage fluctuations in production volumes. System is built from stainless steel with easily accessible interior for optimum cleaning in compliance with hygiene standards. Machine also complies with EU directive 2006/42/CE on machine safety.

PDC International Corp.    South Norwalk, CT 06854
Aug 22, 2012 Featuring dual-wall, dual-zone design, Model KST 140-712 is engineered for packagers of food, beverages, and personal care products that require 300 cpm capacity without complexity of multiple tunnels. System provides 5 pairs of steam tubes in each of 2 zones. Each row is externally adjustable for steam volume, flow, and rotary position. For precise steam regulation, tunnel utilizes condensate traps, steam filtration, step-down regulators, steam valve, and electronic regulator.

Steelnor Systems    Midland, ON L4R4K8
Apr 12, 2012 Suited for seal and trim applications in pet food industry, Model SS3525PTHD-SSC710HDRS offers standard seal width of 3/16 in. and variable speed to 600 ipm. System is constructed of stainless steel and anodized aluminum with illuminated on/off switch, sealed bearings, food-grade belting, and E-stop button. Sealing head height and conveyor height are adjustable. Operating from 4-wire single phase 230 V/60 Hz power, system comes equipped with tamperproof, laboratory-quality temperature controls.

Steelnor Systems    Midland, ON L4R4K8
Mar 28, 2012 Operating at speeds from 25-475 ipm, Model SS85 features stainless steel and anodized aluminum construction, digital temperature control, and electric components. Optional seal guides, available as factory installed or as retrofit, assist operator in locating seal on tear-off pouches. Sealer operates from 115 V, 50/60 Hz and is suitable for customers that want to upgrade from jaw type or Impulse bag sealers.

Steelnor Systems    Midland, ON L4R4K8
Mar 21, 2012 Constructed of aluminum and stainless steel, SS605S Series is suited for applications where quality seal lines must be produced at any position along film material, such as compartment bags, coupon bags, and courier packs. Pneumatic valve closes sealing jaws when running and opens to prevent scorching when idle. Operating from 115 V/60 Hz, sealers are equipped with solid-state temperature controls, fully adjustable sealing shoes, and adjustable floor pads that accommodate web path of any angle.

Steelnor Systems    Midland, ON L4R4K8
Mar 13, 2012 Featuring stainless steel and anodized aluminum construction, Model SS850 is equipped with variable speed drive motor, digital temperature control, and pinch roller system to ensure hermetic seals on specialty and side gusset bags or pouches. Various options are available, including support shelf, support belts that allow products weighing up to 2.5 lb to be carried through process unaided, hot stamp date coder, and SSC440 Conveyor for products in excess of 2.5 lb.

Steelnor Systems    Midland, ON L4R4K8
Mar 07, 2012 Featuring split design with upper and lower sealing modules, Model SS6012S-60 provides unobstructed film path. Machine has rigid steel frame with maintenance-free, precision polymer linear sliding elements; laboratory quality temperature control for each zone on upper and lower sealing modules; filter/regulator with shut off; and adjustable floor leveling pads. Available with variety of seal widths from 1/8-7/16 in., sealer is suited for compartment bags, coupon bags, and courier packs.

Steelnor Systems    Midland, ON L4R4K8
Mar 01, 2012 Used for producing header type seals, SS605 roller sealer has main chassis constructed of aluminum and stainless steel and employs pneumatic valve that closes sealing jaws when running and opens them to prevent scorching when idle. Solid-state temperature controls moderate upper/lower heating zones, while adjustable floor pads or mounting points can accommodate web path of any angle. Also, fully adjustable sealing shoes allow contact angle and pressure to be set to end-user requirements.

Steelnor Systems    Midland, ON L4R4K8
Feb 01, 2012 Available with several options, SS1500TL-SSC812L Sealer and Conveyor is equipped as standard with variable and tamperproof, laboratory-quality temperature controls; PTFE/fiberglass sealing bands; and trim scrap blower. Design can minimize air trapped in head space of bag when packaging fluidic or free flowing products, and speed is variable to 1,100 ipm. Constructed of stainless steel and anodized aluminum, system features standard seal width at 3/16 in.; options range from 1/8-7/16 in.

PDC International Corp.    South Norwalk, CT 06854
Jan 26, 2012 Featuring stainless dual wall construction, Model KST 80A-712 with Steam Venting Package is compatible with wide range of containers, including those that are challenging to shrink consistently. Dual-zone system has 5 rows of steam distribution tubes on each side, each externally adjustable for steam volume, flow, and rotary position. Monitoring tunnel temperatures in real-time, Electronic Regulator makes continuous adjustments in steam release to compensate for thermal loads of incoming product.

All Packaging Machinery Corp.    Ronkonkoma, NY 11779
Dec 09, 2011 Designed for sealing stand-up pouches with variable speeds up to 35 fpm, tabletop Model TCBSDM-3/8 includes synchronized lower support conveyor. Hermetic seals of 3/8 in. wide are achieved through use of wear-resistant laminated Teflon bands. Operating on 110 Vac/10 A with no compressed air required, system is suited for packaging food items, garments, plastic parts, pet products, and medical devices. Optional single line Embossing Coder for product marking is available.

James Dawson Enterprises (USA), Inc.    Plattsburgh, NY 12901
Nov 18, 2011 Utilizing 2-station rotating spindle to carry containers into sealing position at rate up to 25 cycles/min, SealMAX(TM) SC-1300 produces output of 1,500 pieces/hour in single head configuration. For smaller containers, dual head tooling can be designed so that with each machine cycle, 2 containers are sealed for output of 2,700 pieces/hr. Semi-automatic machine accommodates most standard tray sizes over wide range of depths, and can seal trays with multiple compartments.

James Dawson Enterprises (USA), Inc.    Plattsburgh, NY 12901
Nov 17, 2011 SealMAX CTS-168L is available with CTS-168L MAP (Modified Atmosphere Packaging) system. During sealing process, airtight chamber is formed. All ambient air is removed from chamber and package and replaced with desired gas mixture. Sealing in that environment, with residual oxygen level as low as 0.1%, disparages bacteria and mold growth which in turn promotes shelf life. System can seal trays with multiple compartments, and dual head tooling is also available for smaller containers.

James Dawson Enterprises (USA), Inc.    Plattsburgh, NY 12901
Nov 17, 2011 With machine dimensions of 11.8 x 16.2 x 23.5 in., SealMAX CTS-528XL handles deli containers from variety of manufacturers, including circular containers up to 4.75 x 6 in. and rectangular containers up to 4.75 x 4.75 x 6 in. Machine operates on 110 Vac and provides max production rate of 700 pieces/hr. In addition to deli items, SealMAX CTS-528XL delivers airtight seal for containers of salad, snacks, soups, fruit, and sauces.

Romaco Inc.    Lincoln Park, NJ 07035
Sep 22, 2011 Integrating robotic transfer station, heat sealing machine, and intermittent motion cartoner, Siebler HM 1E/240 Line has working height of 90 cm, enabling continuous eye-level monitoring. Four-lane line achieves maximum packaging speed of 1,500 products/min, and uses intelligent separating system to position products accurately in sealing station. When processed horizontally, effervescent products are not exposed to heat and vapors emitted by sealing station, minimizing waste.