Southwire Co.    Carrollton, GA 30119
Apr 05, 2013 By eliminating need for heavy, cumbersome spools, SIMpull® CoilPAK™ payoff enhances productivity and safety for electrical contractors installing branch circuit wiring. Process used by workers to coil NoLube® SIMpull THNN® wire, contained in sturdy yet lightweight package, provides completely tangle-free pull. Inertia-free pulling facilitates operation, and package with molded carrying handle can lay flat or be stacked directly on floor/lift when wire is being pulled.

Nordson Corp., Packaging Systems    Duluth, GA 30097
Apr 04, 2013 Utilizing high-speed solenoid technology, LA 725 and LA 725-S Pneumatic Guns provide continuous or intermittent operation in variety of paper and paperboard applications. Applicators feature frictionless operation, quick-change components, and advanced seal technology that is resistant to most chemicals in water-based adhesives. Snuff-back technology delivers sharp, clean cutoff as excess adhesive is pulled back into applicator.

AVT, Inc.    Corona, CA 92880
Sep 25, 2012 Designed for pharmaceutical industry, AVT Automated Medicine Information and Dispensing System give consumers product information on various types of medicines and can also provide sample dispensing within doctor's office. Tamper-proof system, manufactured with galvanized steel, holds up to 300 items and also provides real-time reports on product interest and sampling. Along with 32 in. touchscreen display, system integrates web camera, drop sensors, and photosensor position controls.

Dymax Corp.    Torrington, CT 06790
Jul 20, 2012 Utilizing pneumatic, NC diaphragm valve, Model 475 dispenses low- to high-viscosity fluids. Design of internal diaphragm and adjacent parts prevents migration of fluid into actuating section within valve, while diaphragm toughness and materials selection for component construction promote extended life between maintenance schedules. Along with 25 micron air filter regulator, features include integrated shutoff valve and pressure exhaust as well as stroke adjustment knob.

Fisnar Inc.    Wayne, NJ 07470
Jul 10, 2012 Comprised of silicone-free, integrated dispensing components, QuantX(TM) system is manufactured using precision mold designs inspected to strict tolerance. Dynamically engineered components maximize performance in close tolerance dispensing, and syringe barrel provides gently curved path to dispense tip aperture for reduced resistance and increased material flow. Syringe barrels come in 3, 5, 30, and 55 cc volumes, together with accessories, which are color coded green.

KitPackers    Germantown, WI 53022
Jun 25, 2012 TwinPak Needle Pouch system accommodates those requiring package capable of delivering 2 component reactive chemicals mixed in variable mix ratios. Product includes 2 chambers separated by burst-able seal; third chamber to aid in mixing; and dispensing outlet for attachment of luer lock tip. For standard package, large and small compartments will have respective capacities of ~55 ml and up to 12 ml. Total capacity for 1:1 and 4:1 mix ratio product would be ~25 and 60 ml, respectively.

Dehnco Inc.    Barrington, IL 60010
May 29, 2012 Used for storing single/multiple rolls of material, stands come in 6 standard widths from 30-80 in. and include free-standing, table-mounted, floor-mounted, and wall-mounted options. Bi-directional Cutting System provides safe operation, and leading edge of material is held in cutter to facilitate access. DS Series provides touchscreen PLC module for programming and operation. USB-compatible system provides accuracy of ±1/8 in. with cutting speeds up to 30 ips.

Essemtec Ag      Switzerland
Aug 08, 2011 Designed for electronics manufacturing and LED assembly, Scorpion can be equipped with up to 4 different dispensing valves and is built on Paraquda machine base that enables dispensing of up to 100,000 dots/hr with ±25 µm accuracy. XY-portal is built on mineral cast chassis, which provides damping and smooth motion at high speeds. For production of high volumes, Twin Dispensing mode enables 2 valves to dispense simultaneously on 2 different locations with adjustable distance.

Magellan Biosciences    Chelmsford, MA 01824
Jul 19, 2011 Designed for use with all Sensititre dried plates, FDA-cleared TREK Diagnostic Systems Sensititre® AIM(TM) Automated Inoculation Delivery System doses microtitre plates. It eliminates skipped wells and repeat tests, streamlining laboratory workflow and accelerating results for clinicians. Suited for use on benchtop or under microbiology safety cabinet, system provides icon-driven touchscreen that facilitates selection of dosing volumes and patterns.

Fluid Research Corp.    Tustin, CA 92780
Mar 28, 2011 Mounted on mobile cart, Triton HD1033 is 2-component meter, mix, and dispensing machine intended for use in encapsulation, potting, and molding of electrical components. Turnkey system, integrated with supply tanks, employs progressing cavity pump technology and control system with parameters such as programmable shot sizes, calibration, vacuum level, degas time, agitator speed, and alarm settings. Other features include multi-zone heating up to 140°F, vacuum degassing, and in-tank agitation.

Lincoln Electric Co., Inc., The    Fort Wayne, IN 46825
Mar 08, 2011 Compatible with up to 2,200 lb bulk stems as well as wood reels, Stem and Wood Reel Dispensing System allows accurate wire placement when using 1/16-3/16 in. dia wire. Horizontal dereeler, featuring heavy-duty design, offers large diameter wire dispensing speeds to 250 (ipm) and up to 800 ipm for smaller diameter wire. Motorized operation helps eliminate challenges such as wire flip, flux-cored wire splitting, excessive tip wear, pulsating, and burn back.

WaferGen Biosystems, Inc.    Fremont, CA 94538
May 03, 2010 To accelerate biomarker validation using gene expression and genotyping, SmartChip Multi-Sample Dispenser can load up to 384 samples or sample replicates on one SmartChip with its 5,184 nanowells. It can potentially shorten drug development process while simultaneously enabling comprehensive biomarker discovery and validation. By removing bottlenecks created from switching between technologies, discovery and validation functions on same platform accelerate drug development.

Asymtek    Carlsbad, CA 92008
Mar 22, 2010 Suited for CSP underfill and LED silicone encapsulation, Spectrum S-920N Series uses 2 DispenseJet® valves to jet fluid, minimizing dispensing time. Dual simultaneous jetting, in conjunction with Calibrated Process Jetting Plus technology, ensures that flow rates for both DispenseJets deliver same mass per part for uniform deposition. Systems automatically compensate for fluid viscosity changes over time as well as batch-to-batch variations to keep process under machine control.

Betco Corp.    Toledo, OH 43607
Feb 24, 2010 Featuring whisper-quiet operation, Clario(TM) TF can be mounted to free-standing floor stand to create instant hand sanitizing stations anywhere. It accommodates up to 1,000 mL bags of foam soap such as Clario(TM) UltraBlue(TM) Antibacterial Foaming Skin Cleanser or Clario(TM) Foaming Alcohol Instant Hand Sanitizer. Included batteries last 60,000 dispenses, and 1 sec reset minimizes time spent waiting for second dispense.

Kirby Lester, Inc.    Lake Forest, IL 60045
Aug 03, 2009 Sized for any retail pharmacy or hospital outpatient pharmacy that dispenses from 100-1,000+ prescriptions per day, KL60 handles all functionality of super-sized robotic dispenser in 46 x 29 x 78 in. design. Compact, fully-automated dispensing system handles labeling and filling of pharmacy's top 60 medications. With 60 drug-specific cassettes aboard, there are no slow-movers to expire in device before they are dispensed.

AZCO Corp.    Fairfield, NJ 07004
Jul 02, 2009 Acu-Sert(TM) CI-250 rotary Cut-to-Length, self-contained machine automatically feeds up to 9 in. wide material on roll. Photo optic eye system detects registration mark, then machine cuts material at up to 300 inserts/min and take away rollers feed it into package. Mounting on base plate, unit includes roll mounted on separate unwind stand and feed rollers adjustable from horizontal to 45° angle downward. It dispenses/inserts coupons, instructions, and absorbent pads.

Asymtek    Carlsbad, CA 92008
Apr 24, 2009 DispenseJet® systems overcome challenges such as material drying, clogging, and difficulty in creating patterns that occur when trying to dispense electrolyte materials in their liquid form. Suited for use in micro-fuel cells and other electro-chemical applications, products deliver precise control of thousands of individual droplets via Mass Flow Control (MFC) feature. Integrated balance scale uses Fluidmove® for Windows XP® software for automatic calibration and control.

Multisorb Technologies, Inc.    Buffalo, NY 14224
Feb 09, 2009 Featuring 2 servo-driven dispensing heads mounted on single chassis, Model APA-4000 dispenses sorbents into broad range of food and healthcare product packaging at speeds up to 600 packages/min. Left and right infeeds from 2 separate spool splicing station cabinets ensure constant product flow for continuous uninterrupted operation. Model APA-4000 can be configured for HDPE bottles for pharmaceuticals, medical device and in-vitro diagnostic pouches, and food product packaging.

Asymtek    Carlsbad, CA 92008
Nov 24, 2008 DispenseJet® DJ-100 series is comprised of 3 models specified for low-, standard-, and high-viscosity fluids. Jet on the Fly(TM) technology enables precision dispensing of fluids in dots, lines, and patterns over part or substrate, and piezo electric technology eliminates need for Z-axis movement. Also included, Calibrated Process Jetting(TM) utilizes weigh scale feedback to maintain consistent dispense volume. Systems achieve flow rates to 200 mg/sec and shot rates to 150 dots/sec.

Fluid Research Corp.    Tustin, CA 92780
May 23, 2008 Suited for automotive prototyping industry, Advantage CPM (Composite Paste Material) solution dispenses thick, pasty materials. Eccentric screw pump technology, offering positive displacement and pulsation-free flow, optimizes production output. Designed to offer higher flow with decreased pressure, dispenser ensures delivery of pastes such as 2-component urethane or epoxy resin systems. Low-pressure pump-down follower plate system empties material drums with nominal waste.