Southwire Co.    Carrollton, GA 30119
Apr 05, 2013 By eliminating need for heavy, cumbersome spools, SIMpull® CoilPAK™ payoff enhances productivity and safety for electrical contractors installing branch circuit wiring. Process used by workers to coil NoLube® SIMpull THNN® wire, contained in sturdy yet lightweight package, provides completely tangle-free pull. Inertia-free pulling facilitates operation, and package with molded carrying handle can lay flat or be stacked directly on floor/lift when wire is being pulled.

Nordson Corp., Packaging Systems    Duluth, GA 30097
Apr 04, 2013 Utilizing high-speed solenoid technology, LA 725 and LA 725-S Pneumatic Guns provide continuous or intermittent operation in variety of paper and paperboard applications. Applicators feature frictionless operation, quick-change components, and advanced seal technology that is resistant to most chemicals in water-based adhesives. Snuff-back technology delivers sharp, clean cutoff as excess adhesive is pulled back into applicator.

Sealed Air Corp.    Saddle Brook, NJ 07663-5291
Mar 08, 2013 Consisting of wall-mountable, automatic inflator for polyethylene wraps, Wonderfil™ Wrap void fill packaging does not require any onsite heat sealing or cutting. System inflates polyethylene Wonderfil™ Wrap material sheet and stops once it is inflated. After inflated wrap is removed by operator, next wrap in cartridge automatically inflates. Valve feature lets users deflate packaging after use, enabling re-inflation at later time for reuse in additional shipments.

Riverside Paper Co., Inc.    Miami, FL 33167
Nov 29, 2012 Mounted on packing stations or table top, ZZ-EP5950-24 Paper Crumpler converts rolls of Kraft paper into packing void-fill. After operators roll out amount of required paper, it is crumpled for placement around product. Wall-mounted ZZ-EP5955-24 is also available, and both 17 lb models feature all-steel construction and built-in cut off blade. Machines use 30 and 40 lb Kraft paper, newsprint, indented paper, or bogus paper on 1–3 in. cores with 8.25 in. max dia and 24 in. max width.

AVT, Inc.    Corona, CA 92880
Sep 25, 2012 Designed for pharmaceutical industry, AVT Automated Medicine Information and Dispensing System give consumers product information on various types of medicines and can also provide sample dispensing within doctor's office. Tamper-proof system, manufactured with galvanized steel, holds up to 300 items and also provides real-time reports on product interest and sampling. Along with 32 in. touchscreen display, system integrates web camera, drop sensors, and photosensor position controls.

Dymax Corp.    Torrington, CT 06790
Jul 20, 2012 Utilizing pneumatic, NC diaphragm valve, Model 475 dispenses low- to high-viscosity fluids. Design of internal diaphragm and adjacent parts prevents migration of fluid into actuating section within valve, while diaphragm toughness and materials selection for component construction promote extended life between maintenance schedules. Along with 25 micron air filter regulator, features include integrated shutoff valve and pressure exhaust as well as stroke adjustment knob.

Fisnar Inc.    Wayne, NJ 07470
Jul 10, 2012 Comprised of silicone-free, integrated dispensing components, QuantX(TM) system is manufactured using precision mold designs inspected to strict tolerance. Dynamically engineered components maximize performance in close tolerance dispensing, and syringe barrel provides gently curved path to dispense tip aperture for reduced resistance and increased material flow. Syringe barrels come in 3, 5, 30, and 55 cc volumes, together with accessories, which are color coded green.

KitPackers    Germantown, WI 53022
Jun 25, 2012 TwinPak Needle Pouch system accommodates those requiring package capable of delivering 2 component reactive chemicals mixed in variable mix ratios. Product includes 2 chambers separated by burst-able seal; third chamber to aid in mixing; and dispensing outlet for attachment of luer lock tip. For standard package, large and small compartments will have respective capacities of ~55 ml and up to 12 ml. Total capacity for 1:1 and 4:1 mix ratio product would be ~25 and 60 ml, respectively.

Dehnco Inc.    Barrington, IL 60010
May 29, 2012 Used for storing single/multiple rolls of material, stands come in 6 standard widths from 30-80 in. and include free-standing, table-mounted, floor-mounted, and wall-mounted options. Bi-directional Cutting System provides safe operation, and leading edge of material is held in cutter to facilitate access. DS Series provides touchscreen PLC module for programming and operation. USB-compatible system provides accuracy of ±1/8 in. with cutting speeds up to 30 ips.

Pregis Corp.    Deerfield, IL 60015
Mar 23, 2012 IntelliPack SmartBagger(TM) FIP System can produce SmartTrax cushions as well as FIP bags. System converts from bag to SmartTrax cushion mode via user touchscreen. In addition to dual functionality, Smart Bagger also features telemetry function, which triggers daily diagnostic testing to ensure unit is performing under preset parameters. Additionally, system can be programmed with bar code data for each specific product that enters pack station.

Sealed Air Corp., Packaging Products Div.    Saddle Brook, NJ 07663
Oct 12, 2011 Available in tabletop or stand-alone models, FasFil® EZ(TM) uses crimping system for efficient, sustainable paper packaging operations. Footswitch actuation lets operator dispense continuous length of paper void-fill material, while timer-based, programmed length output mode eliminates excess paper usage. Along with cutting mechanism, portable system features 100% recycled crimped paper pads that ensure protection and decrease risk of product shifting during shipping cycle.

Sealed Air Corp.    Saddle Brook, NJ 07663-5291
Oct 05, 2011 Available in tabletop or stand-alone models that fit in work cell packaging environment, FasFil® EZ(TM) operates by activating footswitch, allowing operator to dispense continuous length of paper void-fill material. System also offers programmed length output mode option, which sets timer to stop paper flow, eliminating excess paper usage per pack. Built-in cutting mechanism allows for desired lengths of paper material to be dispensed without risk of repetitive motion injuries.

Automated Packaging Systems Inc.    Streetsboro, OH 44241
Sep 28, 2011 AirPouch® FastWrap(TM) produces bubbles and tubes used for wrapping, interleaving, and block-and-brace applications. All-electric unit inflates packing materials at 65 linear fpm and employs dual-belt drive and seal flattening system to ensure wrinkle-free seal and optimal air retention. Intelligent design consistently manages heat, air pressure, and speed to produce seals that do not leak. In addition to knifeless design, several options are available.

Sealed Air Corp.    Saddle Brook, NJ 07663-5291
Aug 19, 2011 Integrating with Fill-Air® 2000 and Fill-Air Cyclone® inflatable void-fill systems, Quick Shot® Delivery Solution accelerates delivery of bag chain with tug feature. System works by retrieving Fill-Air® cushions from bin fed by Fill-Air® 2000 or Fill-Air Cyclone® system and delivering them directly into boxes on packing line. Operators adjust bag replenishment dial to begin, establishing number of bags that system will automatically replenish after operator tears or tugs on bag chain.

Essemtec Ag      Switzerland
Aug 08, 2011 Designed for electronics manufacturing and LED assembly, Scorpion can be equipped with up to 4 different dispensing valves and is built on Paraquda machine base that enables dispensing of up to 100,000 dots/hr with ±25 µm accuracy. XY-portal is built on mineral cast chassis, which provides damping and smooth motion at high speeds. For production of high volumes, Twin Dispensing mode enables 2 valves to dispense simultaneously on 2 different locations with adjustable distance.

Magellan Biosciences    Chelmsford, MA 01824
Jul 19, 2011 Designed for use with all Sensititre dried plates, FDA-cleared TREK Diagnostic Systems Sensititre® AIM(TM) Automated Inoculation Delivery System doses microtitre plates. It eliminates skipped wells and repeat tests, streamlining laboratory workflow and accelerating results for clinicians. Suited for use on benchtop or under microbiology safety cabinet, system provides icon-driven touchscreen that facilitates selection of dosing volumes and patterns.

Sealed Air Corp., Engineered Products Div.    Danbury, CT 06810
Jul 15, 2011 With barcode scanning interface, SpeedyPacker Insight® let customers utilize existing unique product identification barcode to automatically initiate pre-programmed package design and cushion sequence. Automated process minimizes potential for both under packaging and over packaging. To program system, companies input design and sequence information into spreadsheet, which is then uploaded onto SpeedyPacker via USB drive. Single USB drive can be used to download information to multiple systems.

Fluid Research Corp.    Tustin, CA 92780
Mar 28, 2011 Mounted on mobile cart, Triton HD1033 is 2-component meter, mix, and dispensing machine intended for use in encapsulation, potting, and molding of electrical components. Turnkey system, integrated with supply tanks, employs progressing cavity pump technology and control system with parameters such as programmable shot sizes, calibration, vacuum level, degas time, agitator speed, and alarm settings. Other features include multi-zone heating up to 140°F, vacuum degassing, and in-tank agitation.

Lincoln Electric Co., Inc., The    Fort Wayne, IN 46825
Mar 08, 2011 Compatible with up to 2,200 lb bulk stems as well as wood reels, Stem and Wood Reel Dispensing System allows accurate wire placement when using 1/16-3/16 in. dia wire. Horizontal dereeler, featuring heavy-duty design, offers large diameter wire dispensing speeds to 250 (ipm) and up to 800 ipm for smaller diameter wire. Motorized operation helps eliminate challenges such as wire flip, flux-cored wire splitting, excessive tip wear, pulsating, and burn back.

Pregis Corp.    Deerfield, IL 60015
Nov 10, 2010 Suited for limited-space applications, Air Speed® HC Versa produces cushioning in 12, 18, and 24 in. widths and cell heights of ¾, 1, and 1¼ in. with perforation presets every 6 and 12 in. System accommodates virgin air cushioning material, recycled content, and material designed to accelerate microbial biodegradation, without compromising recyclability. Differing from void-fill pillows, hybrid cushioning has multiple air chambers in horizontal and vertical pattern instead of 1 large cell.