Thiele Technologies, Inc.
Minneapolis, MN 55418
Mar 19, 2008 Inserting paperboard, chipboard, or corrugated slip sheet between layers of 8 oz plastic bottles, slip sheet inserter eliminates slippage and prevents bottles from nesting into lower layers. Machine is capable of inserting 10 sheets/min and can be incorporated into any Thiele Pak Tek caser, creating fully integrated system capable of packaging more than 400 bottles/min. It can also be used to upgrade existing caser systems.

GaleWrap
Douglasville, GA 30134
Mar 18, 2008 Offering alternative to conventional hand wrapping, Model GW-3500(TM) combines pallet wrapper and pallet jack in one unit that runs at 11 rpm and can handle 70 in. diagonal loads. System includes manually adjustable film tension, up/down wrapping cycles, independent top and bottom wrap pattern selection from 1-9 wraps, and splash-proof wrapping mode. Minimizing wasted film and worker injuries, pallet wrapper prevents failures by securely wrapping each load.

Fibox Enclosures
Glen Burnie, MD 21061
Mar 12, 2008 Available in 5 sizes ranging from 6 x 6 x 4 in. up to 14 x 12 x 7 in., ARCA enclosures are UL Listed, with larger sizes having NEMA ratings Type 4, 4X, 12, and 13. Sizes 12 x 10 in. and smaller are also rated NEMA Type 6 and 6P. Transparent screw and hinged covers offer overlapping design to protect formed-in-place polyurethane gasket. Mounting plates plus fixed and hinged inner panels are available in metal/non-metallic versions.

Storopack Inc.
Cincinnati, OH 45246 1106
Mar 12, 2008 Available in 1½ and 2½ in. sizes, Airplus® Tubes conform to products to protect them during shipment. Roll of 13 in. film produces 2,000 ft of tubes which are perforated every 6 in. for small tubes or every 5 in. for large tubes. Used as cushioning and void fill, tubes are suitable for cylindrical products such as glass bottles and jars, fragile glass containers, porcelain figurines, and hard-to-pack industrial products.

North Safety Products, Inc.
Cranston, RI 02920
Mar 12, 2008 Featuring mechanism that provides one ear plug at-a-time, single plug dispenser works with DeciDamp2 and Deci4200 Earplugs. Machine is available with bucket containing 500 pairs of ear plugs as well as wall mount. Table stand is optional.

Polymer Molding, Inc.
Erie, PA 16502-2115
Mar 12, 2008 Suited for automated feed systems, CAT Series Caps offers product protection with flexibility to remove and replace cap as needed. Units are molded in low-density polyethylene with LDPE service temperature of 150°F. Designed to protect products with or without O-rings, caps are natural in color and available for standard, NPT, and metric thread protection.

3M Company / Packaging Systems Division
St. Paul, MN 55144
Mar 11, 2008 Suited for operations currently taping boxes by hand, 3M-Matic(TM) a70 features 4-belt drive for optimal traction and consistent sealing of uniformly sized RSCs. Unit includes 3M(TM) AccuGlide(TM) Taping Head 2+ for low-impact application of tape from 36-48 mm wide. Machine handles carton sizes from 6-21.5 in. wide, 4.75-21.5 in. high, and up to 65 lb.

Advance Lifts, Inc.
St. Charles, IL 60174
Mar 11, 2008 Designed to use sophisticated stretch wrap film, semi-automatic Series 300 features powered prestretch carriage and allows standardization of wrapping procedures. Standard prestretch is 200% with options for 260% or 300% prestretch ratios. Intended for less expensive stretch wrap film, semi-automatic Series 200 produces consistent loads.

DuPont
Research Triangle Park, NC 27709-4425
Mar 11, 2008 Available in 50, 75, 100, and 120 micron thicknesses, WBR 2000 Series dry film photoresist material is suited for multi-purpose use, including in-via and mushroom plating, photo stenciling, and copper pillar metallization. It does not require drying of solvents, can be applied in single uniform layer across entire wafer with no edge bead, and features high heat resistance, chemical compatibility, and easy removal.

A-B-C Packaging Machine Corp.
Tarpon Springs, FL 34689 4137
Mar 07, 2008 Able to open and insert up to 50 partitions/min while cycling at 25 cycles/min, Model 70 accommodates food and beverage bottlers as well as bottle suppliers serving multiple markets with diverse product packaging. Product incorporates 2 servo-operated insertion heads, tool-free changeover, and touchscreen operator station. Machine runs chipboard and corrugated partitions with 6, 12, 15, 18, 24, and 48 cells; air cell 6-packs; A cell 6-packs; and all standard locking partitions.

Industrial & Wholesale Lumber, Inc.
Schiller Park, IL 60176
Mar 07, 2008 Combining heat-treated, real wood construction with heavy-duty cardboard corrugated sheets, Sheet-Pak(TM) is designed for containing, protecting, and shipping flat sheets. Each unit can hold up to ¾ in. of flat goods per pack, from 12-48 in. wide x 48-144 in. long with custom sizes available. Completely reusable, Sheet-Pak offers optional quick-clip fasteners for closure.

Lantech Inc.
Louisville, KY 40299-2316
Mar 03, 2008 Designed for automated conveyorized operation, Model S-2500 can be used in-line, end-of-line, or freestanding to allow load accumulation. It handles loads up to 58 in. square x 80 in. tall, and provides automatic load indexing, film attachment, cutting, and wiping. Touchscreen control incorporates Lan-Logix interface for programming wrap parameters. Power Roller-Stretch® Plus film delivery system pre-stretches film up to 300%, while diagonally opposed 2-column chassis provides stability.

GaleWrap
Douglasville, GA 30134
Feb 29, 2008 Measuring 114 x 96 x 98 in., Standard Manual Model Yellow Jacket 110® secures palletized loads directly on forks of forklift. Horizontally positioned stretch-wrap dispenser moves around and under load as Yellow Jacket 110 is manually advanced across length of load. Featuring adjustable tensioning for range of 0-150% film post stretch, product can wrap standard pallet size up to 68 in. diagonal and uses any machine-grade film up to 20 in. wide.

Terumo Interventional Systems
Somerset,, NJ 08873
Feb 26, 2008 Pinnacle Total Integrated Fit (TIF) Tip(TM) Introducer Sheath bends and flexes without gapping, kinking, or producing sharp crimps to minimize potential trauma. Sheath is developed with unique manufacturing process that creates super-fine tapered edge and super-smooth transitions from dilator-to-sheath and guidewire-to-dilator. This produces less penetration force during vascular entry resulting in safer insertions.

EGS ELECTRICAL GROUP ? APPLETON
Rosemont, IL 60018
Feb 20, 2008 Made of red, epoxy powder-coated steel, fire and safety Outlet Boxes, Extension Rings, and Covers eliminate need for painting at job site. Boxes come in 4 in. and 4 11/16 in. square sizes, measuring 1 ½ in. and 2 1/8 in. deep, with welded or drawn construction to meet needs of commercial applications. Groundskeeper(TM) raised boss enables 3/8 in. ground screw to be threaded into box without contacting mounting surface. Standard flat ground tapped holes are also available.

Key Technology Corp.
Mukilteo, WA 98275
Feb 15, 2008 Featuring semi-automatic, push-button operation, AV Sealer heat-seals various bag sizes with or without vacuum and has optional gas flush cycle. Adjustable user programs set vacuum pressure, gas flush, heat sealing temperature, and seal time. Able to be switched over to handle different products and bag sizes in seconds without tools, changeparts, or mechanical adjustments, PLC-controlled unit has open design, weighs 73 lb, and is constructed of stainless steel and anodized aluminum.

New England Machinery, Inc.
Bradenton, FL 34203 5304
Feb 13, 2008 Suited for pharmaceutical industry, intermittent-motion model NESHC-S is built with servo motors that utilize feedback loop control to accurately position caps and ensure repeatable torque during capping process. Applied torque is set and displayed via touch screen, which offers container specification monitoring and rejection capabilities. Built as freestanding unit, solution offers tool-less, modular change parts and menu-driven changeover flexibility.

New England Machinery, Inc.
Bradenton, FL 34203 5304
Feb 13, 2008 Designed to orient and feed containers vertically, model NEVF features integrated hopper and belt-less design suited for pharmaceutical applications. Solution, supplied with its own starwheel, will discharge onto customer's conveyor. It also integrates with filler, feeding containers into filler's starwheel. Small and/or unstable containers can be fed into pucks, and machine can be changed over to run range of products.

The Packaging Company
Long Beach, CA 90814
Feb 07, 2008 Derived from starch-rich field plants such as corn, Polylactic Acid or Polylactide (PLA) compacts are made from environmentally friendly material that retains physical properties of regular plastic, can be composted, and biodegrades within 5 years in landfills.

MOCON
Minneapolis, MN 55428 1010
Jan 31, 2008 Lippke(TM) 4000 Series is designed to perform leak and seal strength tests on flexible, rigid, and porous materials while simultaneously assessing package ability to seal contents against contamination. Using self-adhesive septum, system conducts tests at 3 pressure levels and includes flow booster technology. Available as standalone unit (Model 4000) or PC-operated, bench-top unit (Model 4500), reproducible test results are meet ASTM Standards F2054/1140/2095 and ISO Standard 11607.