Ocean Optics, Inc.
Dunedin, FL 34698
Aug 05, 2003 Variable-angle Reflection Sampling System couples to spectrometers and light sources to measure spectral reflectance of optical substrates from 200–1,100 nm at angles of incidence from 10° to 50°. Modular, optomechanical device has black anodized stainless-steel chamber with 2 ports for SMA 905-terminated optical fibers. Its 3-point fixed surface mount retains sample position, while thumbscrew locks optical assembly at fixed angle.

SICK, Inc.
Bloomington, MN 55438
Jul 10, 2003 With 190° scanning range and 5.5 or 7.0 m Safety Zone radius options, S 3000 safeguards work areas, protecting personnel and equipment from damage and injury. Optoelectronic solution is suited for use in stationary and mobile applications for 2D or 3D horizontal and vertical safeguarding of point-of-operation, entry/exit, and area locations. Product offers 4 levels of integrated functionality for up to 16 user-definable protection scenarios.

Lambda Physik, Inc.
Fort Lauderdale, FL 33309
Jul 09, 2003 GeoLasâ„¢ PLUS integrates COMPex® 193 nm excimer laser, homogenized optical system, sample handling, sample visualization, and control software. It produces controlled, small particle sizes that result in low fractionation index near 1 for optimized data collection. Highly precise beam can be reproduced for sample after sample. Modular form allows unit to be moved between mass spectrophotometers and laboratories.

Newport Corp.
Irvine, CA 92606
Jun 25, 2003 Refractive Beam Shaper converts Gaussian laser beam input to produce collimated, flat-top beam that can propagate without change in power and intensity, or loss of uniformity over large distances. Optics produce no hard edges, speckles, or diffraction effects. Shaper functions over large bandwidth from far IR to deep UV allowing for use in many fields. Applications include illumination, laser processing, nonlinear optics, microscopy, and printing.

Bivar, Inc.
Irvine, CA 92618 2593
Mar 18, 2003 Housed in 3 and 5 mm packages, UV LEDs include TO-92, all metal and glass encapsulated UV LED and 1206 surface-mounted discrete UV LED package. Depending on device package, solid-state devices provide viewing angles from 30–140°. Operating temperature range is -20 to +85°C, typical radiant flux is 12 mW per chip, and typical stable wavelength varies from 390–410 nm. Devices demonstrate resistance to shock and vibration.

Stratos Lightwave Inc.
Chicago, IL 60706 4549
Jul 03, 2002 RJ Format transceivers operate at 2.5 Gb/sec in heavy traffic environments such as servers, remote storage devices, and multi-processor systems. Transceivers are available in single-port and quad-port packages with duplex LC connector interfaces at each port. Transceivers are available for 850 nm VCSEL multimode optical fiber applications with link distances up to 250 m, and 1310 nm Fabry-Perot Laser single mode optical fiber applications for link distances up to 10 km.

GSI Lumonics
Northville, MI 48167
Jun 26, 2002 Luminator fiber-optic system protects fibers from possible damage caused by back reflection during high-power welding of highly reflective materials, such as copper and aluminum. Terminations at each end of cable enables users to weld at full power without risk of harming equipment or fiber-optics. Luminator technology takes heat away from terminations where it is routed to detector that tells user how much back reflection is being produced.

Meller Optics, Inc.
Providence, RI 02940
May 08, 2002 Beam delivery optics, for 25 to 200 W lasers, are available with coatings for phase and polarization. Optics include lenses, mirrors, and beam combiners in sizes from 1/2 to 1 1/2 in. OD. Focal lengths range from 1 to 25 in. in 1/2 in. increments. Optics provide less than 0.2% total absorption. Applications includes Synrad lasers and low-power industrial marking, laser etching, and soldering systems.

Fons Corporation
Northboro, MA 01532
Apr 22, 2002 Integrated optical/tap jumper can be utilized in any optical transport network such as voice, video, and data systems with optical signals. Tap/monitoring port can be added to any standard patch panel within existing network with no additional frame space. Jumper is also suitable for wavelength division multiplexing and optical power splitting applications.

Lambda Physik, Inc.
Fort Lauderdale, FL 33309
Mar 13, 2002 CrystaLas(TM) laser-based excimer submodule can be integrated into R&D or manufacturing tool to control large-grain-size-crystal growth for fabrication of thin film transistors (TFTs). Device provides location controlled, high resolution, high power silicon film treatment with low temperature process. It is available with Lambda Physik LPX(R) 210 excimer laser for R&D, or Lambda Physik Lambda STEEL(TM) 670 or 1000 excimer laser for production.

Festo Corp.
Hauppauge, NY 11788
Jan 17, 2002 Checkbox Optoelectronic System detects part orientation and quality, and facilitates automated picking and sorting processes. System integrates imaging technology, conveyor, and ejection mechanisms. Camera continuously analyzes work piece contours, detecting and evaluating orientation and physical characteristics. System suits rotationally symmetrical and pre-oriented work pieces of any shape, with diameters from 0.5 to 80 mm, and lengths of 3 to 80 mm.