Thinklogical
Milford, CT 06460
Sep 19, 2008 Harnessing single-mode fiber optic technology, VelocityKVM transmits and receives DVI video and peripheral signals up to 40 km. Advanced peripheral capability supports PS2, full duplex stereo audio, serial RS-232, USB 1.0 HID device ports, USB 1.1, and 2.0. Supporting multiple video sources, VelocityKVM provides error-free transmission, with no frame or bit dropping and complete immunity to interference.

M2 Optics, Inc.
Holly Springs, NC 27540
Aug 27, 2008 Capable of measuring 15 MHz to 1 GHz ±1 dB power from optical cable and providing 75 W RF output to drive spectrum analyzers, FOS1000A 1000 MHz Optical Receiver can monitor and measure optical modulation index of optical carrier in percent/channel or percent total. It emulates typical wideband optical node used in high quality optical networks, and eliminates need for multiple instruments and optical systems analyzers when setting up, benchmarking, and maintaining transmitters.

ComNet
Danbury, CT 06810
Aug 11, 2008 Fiber optic Models FVR11 and FVR10 receive single baseband video channel as optical signal from up to 2.5 km, and convert signal back to baseband video for monitoring. Model FVR10 features manual gain adjustment, whereas Model FVR11 offers automatic gain control that adjusts changes in camera output that might degrade video quality.

Agilent Technologies, Inc.
Palo Alto, CA 94303
May 12, 2008 Facilitating design and validation testing, 86116C Option 025 provides reference receiver capabilities for 100-G Ethernet and 16X Fibre Channel signals. Module works with 1,310 nm and 1,550 nm single-mode transmitters, and characteristically has 45 GHz optical and 93 GHz electrical unfiltered bandwidth. Used in 86100C DCA-J oscilloscope mainframe, unit helps engineers investigate, design, and verify performance of transceivers that terminate optical fibers for LANs and SANs.

Discovery Semiconductors Inc.
Princeton Junction, NJ 08550
Feb 21, 2008 Offering linearity with third order intercept point as high as 50 dBm, 40 Gbps photodiode and receiver feature differential GPPO RF outputs that enable reception of all pre-amplified and unamplified 40G modulation formats. Receiver package interfaces to commercial CDR/DEMUX modules, and products address several modulation formats: ASK, DPSK, and DQPSK. Receiver configurations include single, balanced, and dual detection schemes, with and without transimpedance amplification.

Omron Electronics LLC
Schaumburg, IL 60173
Jan 23, 2008 Supporting HDMI rev1.3 requirements, P1TX4C-SX51 Transmitter Optical Subassembly and P1RX4C-SX51 Receiver Optical Subassembly enable single link that carries bi-directional communication in parallel to high-speed data. HDMI rev1.3 specifications allow for Deep Color support, which utilizes up to 16 bits per pixel, as well as true lossless audio playback through Dolby TrueHD and DTS-HD audio formats.

Motorola, Inc.
Schaumburg, IL 60196 4041
Jan 14, 2008 Comprising various single- and double-tuner host set-top solutions, DCX series offers HD video and surround sound audio capabilities that enable reception of on-demand and interactive digital cable programming. Model DCX3400 includes DVR capabilities, and all models offer multimedia hub capabilities that enable stored content to be shared with other compatible devices. Along with MPEG-2 and MPEG-4 technologies, STBs incorporate 1 GHz tuners and DOCSIS® downstream channel bonding.

Emcore Corp.
Somerset, NJ 08873
Apr 06, 2006 Designed to optimize performance of 10GBASE LRM modules, 1310 TOSA and linear ROSA 10Gbps transmit and receive pair exhibit typ OMA sensitivity of -17 dBm. LRM ROSA includes 10Gbps InP PIN photo-detector, transimpedance amplifier, and LC or SC optical barrel. ROSA has differential output and remains linear over input power range defined in LRM standard. Product is optimized to work with electronic dispersion compensation ICs to meet LRM module linear requirements.

CyberResearch, Inc.
Branford, CT 06405 2932
Aug 22, 2005 Able to transmit PS/2, USB, Sun keyboard and mouse signals plus DVI or VGA video, fiber-optic KVME 1000 utilizes technology that combines all electronic input and output signals into one optical KVM signal. Transmitter and receiver convert all KVM signals into all supported formats, enabling use of keyboard, video, and mouse simultaneously at both local and remote ends of circuit. KVME 1000 also supports BNC stereo emitter audio signals.

Banner Engineering Corp.
Minneapolis, MN 55440
Aug 12, 2005 Non-contact fiber optic PICO-GUARD™ Points enable multiple emitter and receiver points to be arranged to create customized optical safety grid that meets Safety Category 4 requirements. Resistant to damage from moisture and debris, IP67-rated products operate with light and use no electricity. Safety elements with 12 mm polycarbonate threaded barrel have operating range of 1.5–6.4 m, whereas 30 mm stainless steel threaded barrel models operate over 8.5–28.7 m range.

Trust Automation, Inc.
San Luis Obispo, CA 93401
Aug 03, 2005 Providing fiber-optic transmission of command signals and encoder feedback, TA821 Copper Reduction modules convert electrical encoder, hall sensor, and limit signals to optical signal and back into electrical signals. Products, mounted with motor and on linear stage, are available in 1-, 2-, and 4-axis units that operate on 5 Vdc and feature power-on status indicating LED. Modules measure 3.50 x 3.03 x 0.75 in. and are suited for motion control applications.

Discovery Semiconductors Inc.
Princeton Junction, NJ 08550
Jun 06, 2005 Capable of detecting multiple wavelengths, Optical Coherent Receiver Systems are intelligent transport systems compatible with ASK, (D) PSK, and FSK modulation formats. They provide sensitivity for both fiber and free-space applications in optical C and L bands. Units can also be used at other wavelengths, including 980, 1,064, 1,310 nm, and optical S band.

Tyco Electronics Corp.
Harrisburg, PA 17105-3608
Mar 01, 2004 LDPF and LDPW series PINFET Optical Receivers integrate PIN photodiode and discrete transimpedance amplifier stage. Light is coupled into detector stage through multimode optical fiber pigtail that allows coupling with either single or multimode fiber systems. Sensitivity and dynamic range can be customized to meet user requirements. Equipped with automatic gain control, LDPW series provides dynamic range operation up to 0 dBm.

M2 Optics, Inc.
Los Angeles, CA 90034
Jan 13, 2004 Microprocessor-controlled FOS-860A monitors and measures optical modulation index (OMI) of optical carrier. Capable of measuring OMI in percent, per channel, or total, all controls are front panel-accessible, and results are displayed on 2-line, 48-character, back-lit LCD. Unit features front panel BCD pushbuttons for channel loading and measures optical power in mW or dBmW within 1310 and 1550 nm optical windows in absolute or relative modes.

International Fiber Systems Inc
Newtown, CT 06470
Nov 25, 2003 Transmitter and Receiver Modules VT1101M and VR1100-CC can incorporate contact closure relay for alarm-event notification. Addition of relay allows device such as dome tamper switch or alarm event input to be added and its signal transmitted back to monitoring location, eliminating need for additional wiring. Modules support distances up to 2.5 miles without repeaters. Operating temperature is -40 to 74°C.

VSK Photonics, Inc.
Lake Forest, CA 92630
Oct 16, 2003 Receiver Optical Sub-Assemblies optimize performance of 10 Gbps transceivers using electronic dispersion compensation. Multi-mode Model VSK10R07-06 incorporates photodetector with linear pre-amplifier for 1310 and 1550 nm systems. It features bandwidth of 8 GHz, sensitivity of -13 dBm, and dynamic range greater than 15 dB. Single-mode Model VSK10R09-06 operates at 1310 and 1550 nm and achieves sensitivity of -17 dBm, 19 dB dynamic range, and bandwidth of 8 GHz.

VSK Photonics, Inc.
Lake Forest, CA 92630
Apr 15, 2003 Model VSK10R05 receiver module combines photodetector with integrated pre-amplifier for operation at 9.9, 10.7, and 12.5 Gbps. Providing optical sensitivity of –19 dBm, optical overload of +2 dBm, and bandwidth of 10 GHz, receiver features MSA-compliant 17-pin surface mount small form factor package. In noisy optical environments, optical overload remains greater than 0 dBm at OSNR of 13 dB/0.1 nm. Module is targeted at applications using Electronic Dispersion Compensation.

Tyco Electronics Corp.
Harrisburg, PA 17105-3608
Apr 01, 2003 Para-Optix™ Transmitter/Receiver and Transceiver product family includes transceivers that mate to Para-Optix Cable Assemblies utilizing MPO-style connector. Products incorporate 850 nm Vertical Cavity Surface Emitting Lasers (VCSELs) for VSR applications. Transmitters/receiver, with 12 fibers, is targeted to SNAP-12 Standard, while transceiver incorporates 16–72 fibers. Data rates are offered from 2.7–3.4 Gb/s per channel, with demonstrated reach of up to 1.1 km.

VSK Photonics, Inc.
Lake Forest, CA 92630
Mar 27, 2003 Model 40R02 40 Gbps module incorporates waveguide photodetector with integrated pre-amplifier. Sensitivities approach -15 dBm, and typical noise current density is ~20 pA/rtHz. Unit features +2 dBm optical overload, bandwidth greater than 50 GHz and provides efficient operation at 43.5, 18, 12.5, and 10.7 Gbps. At 12.5 Gbps, it offers sensitivity of -17.5 dBm. Module comes in high-speed 14-pin butterfly package with single-mode fiber pigtail.

Discovery Semiconductors
Cranbury, NJ 08512
Nov 12, 2002 Models DSCR405 and DSCR405ER are 15 dB InGaAs balanced photoreceivers for wavelengths from 800 to 1,650 nm with over 14 and 20 GHz bandwidths, respectively. They are targeted at digital telecommunications markets using 10 and 20 Gbps with FEC and RZ formats. Units feature small form-factor fiber-pigtailed package that is hermetically sealed and built to GR-468 standards.