NEC Corporation
Tokyo 108-8001  Japan
Apr 18, 2007 Leveraging Planar Lightwave Circuit technologies with AZNA's extended-reach Chirp Managed Laser technology, 10 Gbps XFP Transceiver is suited for 160 km links without dispersion compensation. Chirp Managed Laser allows passive optical alignment and uses standard DFB laser and passive optical spectrum reshaper filter to achieve extended reach.

Emcore Corp.
Somerset, NJ 08873
Apr 13, 2007 Intended for long reach, 10 Gbps applications, DWDM Model EDW-9100-XFP consists of transmitter with cooled 1,550 nm EML and high-sensitivity receiver with APD photodetector. Transceiver operates over temperature range of 0-70°C and offers optimum heat dissipation and electromagnetic shielding, enabling high port densities for 10 Gbps systems. Key options include C-Band and L-Band coverage at 100 GHz ITU-grid spacing, as well as private labeling.

ColorChip LTD.,
Caesarea 38900  Israel
Apr 10, 2007 Offered as single fiber, 3-channel full duplex module, Meteor III Triplexer Transceiver Platform combines WDM optics for 1,310 and 1,490 wavelengths for voice and data as well as 1,550 wavelength for RF CATV on PLC chip. Control circuitry stabilizes average optical power output and transmitter extinction ratio to ensure stable performance of module for FTTH ONT applications. Product supports BPON and GPON optical transceiver modules and is configurable to support FSAN compliance.

Emcore Corp.
Somerset, NJ 08873
Apr 10, 2007 ETU-9C00-SFF is a multi-purpose full band tunable optical transceiver module for 10 Gbps DWDM Long Reach telecom and datacom applications. Design provides wave-locked 50 GHz channel spacing on the ITU-grid and is tunable across entire C- band. It is suited for high performance telecom applications that require SDH STM-64, SONET OC-192, or 10GBASE-ZR transmission. Mach-Zehnder transmitter supports applications requiring less than 2 dB dispersion penalty through 100 km of fiber.

Ethernet Direct
Newark, DE 19702
Jan 17, 2007 Models HMG-828 and HMG-628G Husky Series Industrial Managed GbE Switches feature SFP ports with fiber slot design allowing insertion of multi- or single-mode fiber modules. SFP single mode transceivers come in typical 10 km and overhaul 40 and 80 km distances. Switches automatically detect gigabit cable connection priority for each Gigabit port, and can be remotely configured by web browser, SNMP, Telnet, CLI, or menu-driven management system.

Firecomms Ltd.
Cork   Ireland
Jan 12, 2007 Available in housing with OptoLock(TM) Plastic Optical Fiber Port, EDL300 Plugless Transceivers are suited for 100 Mb Ethernet applications with stringent quality of service requirements such as IPTV gateways, set-top boxes, and hubs. Design of OptoLock enables fiber to be cut and terminated to exact required length on site. It is mechanically and electrically interchangeable with SMI connectors enabled by EDL300 transceivers.

Broadcom Corp.
Irvine, CA 92618
Jan 03, 2007 Leveraging DSP technology, BCM8706 10GbE PHY device enables IT professionals to preserve existing multi-mode and single-mode fiber infrastructures by providing upgrade path from 1 to 10 Gigabit Ethernet. DSP equalizer provides optimal performance over 300 m of multi-mode fiber. In support of SFP+ optical module standard, BCM8706 incorporates multi-tap transmit pre-emphasis to compensate for FR-4 board material loss in line card applications.

Mercury Computer Systems, Inc.
Chelmsford, MA 01824
Nov 13, 2006 Component of integrated COTS offerings, Echotek(TM) Series ECV4-RFT 6U Wideband Remote Fiber Transceiver is used in applications requiring 274 Mbps and higher wideband data links that require blend of wideband I/O from dual 1.5 GS/sec 8-bit A/D converters and dual 1.2 GS/sec 14-bit D/A converters. Onboard Xilinx Virtex(TM)-4 FPGA reconfigurable processing resources enable multi-board coherent processing in distributed systems.

Texas Instruments, Inc. (TI)
Dallas, TX 75243-4136
Aug 18, 2006 Qualified to MIL-PRF-38535 Class V, 1.6-2.7 Gbps TLK2711HFGQMLV Serializer/Deserializer is suited for high-speed backplane interconnect and point-to-point data link applications. Radiation-hardened unit provides 2.5 Gbps I/O data channels for baseband data transmission over controlled impedance media of approximately 50W. Transmission media can be PCB, copper cables or fiber optic cable. Unit uses 2.5 V power supply and draws less than 500 mW.

American Fibertek Inc.
Somerset, NJ 08873
Aug 03, 2006 Series 93287SL Singlemode Fiber Optic Multi-channel System provides 48 channel input and output of 10-bit digitized video with bi-directional Ethernet channel, bi-directional multi-protocol data channel, and bi-directional audio channel on one singlemode optical fiber. Transmission can be via 10/100 Base T or Gigabit Ethernet. Status is provided by visual indicators or remote web based system. 94887SL Series is suited for surveillance systems with multiple cameras in different locations.

Fiberxon
Santa Clara,, CA 95054
Jul 27, 2006 With Digital Diagnostic Monitoring interface on both ends, GPON Class B+ Transceivers are compatible with both reset and reset-less GPON system design. Units can recover every bit of incoming optical signal running in burst mode and offering 28 dB loss budget and 20 dB dynamic range without power leveling scheme. RoHS-compliant transceivers support Multimedia over Coax Alliance functionality and operate in industrial temperature range.

MRV Communications, Inc.
Chatsworth, CA 91311
May 30, 2006 Digital Video Small Form Factor Pluggable Transceivers allow transport of uncompressed high-definition video over standard fiber optic networks. Each unit has coaxial cable connector that takes digital video feed from camera or production system, and feeds it into SFP-based system that converts sight into fiber optic signal. Transceivers use encoding algorithm based on EG-34 industry standard to transport SDI and HD-SDI data.

Bookham, Inc.
San Jose, CA 95134
Apr 13, 2006 Designed to increase networking equipment port density while avoiding resulting thermal challenges, IGF-42312 multi-protocol, 10 km reach transceiver supports SONET/SDH SR-1/I-64.1, 10G Ethernet, and 10G Fibre Channel applications - including FEC rates. It surpasses 1,000 hr interim phase of Telcordia Generic Reliability Assurance Requirements for Optoelectronic Devices used in Telecommunications (GR-468-CORE) qualification testing.

Broadcom Corp.
Irvine, CA 92618
Apr 04, 2006 Offered in lead-free 13 x 13 mm plastic BGA package, Model BCM8705 LAN/WAN PHY enables 10 GbE data to be transported over existing SONET/SDH backbone. It offers SONET/SDH performance monitoring block that includes dedicated serial port to connect to external controller. On-chip built-in self test generators and checkers, along with number of different loopback modes, allow for independent diagnostics on device. PHY dissipates 1.1 W in WAN mode and 0.9 W in LAN mode.

SiRES LABS
Cyberjaya 63000  Malaysia
Aug 02, 2005 Optimized for speeds from 1–3.125 Gbps, SRL3101NST optical PMD (transceiver) chip integrates transimpedance amp (TIA), limiting amp, VCSEL driver, digital diagnostics, and LVDS interface. It is designed for use with VCSELs and PIN/APDs in VSR applications. Along with integrated temperature sensor and internal closed loop feedback, features include single +3.3 V operation, peak-to-peak jitter of 20 ps, and modulation and bias currents up to 10 mA each.

American Fibertek Inc.
Somerset, NJ 08873
Jun 22, 2005 Featuring transparent operation, M1450 and M1460 Series provide low-profile fiber optic solutions that integrate with Ademco and American Dynamics dome cameras, respectively. Series M1450 Video and Data Transceiver utilizes one multimode optical fiber to transmit video plus contact closure and return RS422 for PTZ control. Series M1460 Series Single Fiber Bi-Directional Transceiver utilizes one multimode optical fiber to transmit video and data.

American Fibertek Inc.
Somerset, NJ 08873
Jun 21, 2005 Able to transmit and receive 1000Base-SX over multimode or singlemode optical fiber, 47 Series Ethernet Data System allows systems designers to integrate fiber optic technology into networked security systems. Device provides logical gateway to GigE networking and facilitates migration to digital networked operating environment. Completely transparent, product delivers auto negotiate features and automatically configures itself for MDI/MDIX operation.

American Fibertek Inc.
Somerset, NJ 08873
Jun 21, 2005 Multi-protocol 480 Series transmits and receives single channel of data - RS485, RS422, RS232, or Manchester Code - over one singlemode optical fiber, while 487 Series transmits and receives 2 RS485 signals over one optical fiber. Digital data systems in 487 Series, configurable for 2- or 4-wire operation, can be biased or non-biased and terminated or not by selectable dip switches. Series 480 is completely transparent to data protocol.

American Fibertek Inc.
Somerset, NJ 08873
Jun 21, 2005 Multimode 984 series and singlemode 984SL series 8-channel video transceivers employ data multiplexing capabilities for digital networking. With built-in RS485 protocol, units offer RS422/485 data compatibility for camera and system control; RS485 data can be configured on 2 (half-duplex) or 4 (full duplex) wires and terminated or unterminated with or without bias. Designed to be completely transparent, units transmit uncompressed video channels.

Stratos Lightwave Inc.
Chicago, IL 60706
Jun 03, 2005 Constructed to IPC Class 3 standards, small form factor (SFF) transceivers comply with MIL-STD-810E and operate using multimode fiber. LED version operates at 1,310 nm and complies with IEEE 803.2u Fast Ethernet standard. It operates at data rates from 1–300 Mbps and supports data links up to 1.2 miles. Operating at 850 nm, VCSEL-based version supports data links up to 1,600 ft and is intended for Gigabit Ethernet, 1xFibre Channel, or InfiniBand.