E2O Communications, Inc.
Calabasas, CA 91302
Jun 18, 2002 EB015-U3EA 1550 nm TX/1310 nm RX Transceiver for short and intermediate reach applications conforms to 155 Mbps SONET OC-3/SDH STM-1 and 100 Mbps Fast Ethernet specifications. When used with company’s complementary model EB015-N3EA transceiver, it provides complete Fiber to the Home (FTTH) connection. Module uses single +3.3 V power supply, operates with 9/125 micro m single mode optical fiber, and has single fiber MU connector.

E2O Communications, Inc.
Calabasas, CA 91302
May 16, 2002 EM12T250 Transmitter and EM12R250 Receiver incorporate FCI (Berg) 10 x 10 MEG-Array y-axis connector system and are compatible with 12 channel Multiple Source Agreement. Parallel Fiber Optic modules offer 2.5 Gbps per channel and are designed for use in applications requiring up to 30 Gbps aggregate throughput. They operate with 50 m and 62.5 m multimode optical fiber array type cables and use single 3.5 V power supply.

Stratos Lightwave Inc.
Chicago, IL 60706 4549
May 09, 2002 Small Form-Factor Pluggable (SFP) optical transceivers are available with one-piece dog-leg actuator for reliability, or wire bail latch to ease transceiver removal in dense applications. Oxide VSCEL laser diode included in 850nm versions. All transceivers are MSA-compatible.

Optobahn Corporation
Torrance, CA 90502
Apr 29, 2002 Single mode 3.2 Gbps 8-channel transmitter/receiver set is designed for telecom and datacom applications. It conforms to Telcordia GR-468-CORE standards. Device incorporates technology of 1310 nm edge emitting laser. It is solder reflowable and provided in surface mount package.

International Fiber Systems Inc
Newtown, CT 06470
Apr 26, 2002 D7100 Series Ethernet transceivers offer selectable data rate for 10 MBPS or 100 MBPS transmission over multimode or single-mode optical fiber. Used for point-to-point transmission in systems utilizing Ethernet packet data protocol, transceivers can exist within networks or in facilities where no existing Ethernet cabling infrastructure exists. Available in stand alone or rack mount versions, D7100 features LEDs for operating status and data presence.

Discovery Semiconductors
Cranbury, NJ 08512
Mar 20, 2002 Model R402APD APD + TIA optical receiver, for 10 Gpbs applications, provides sensitivity of -26 dBm typical and is capable of driving variety of circuits, such as clock recovery, AGC or integrated time division demultiplexers. Module can be used in 80 channel/160 channel DWDM long haul systems, SONET/SDH systems, and telecom metro/short or medium reach systems.

Discovery Semiconductors
Cranbury, NJ 08512
Mar 20, 2002 R601APD and R602APD are APD versions of single-ended digital 2-R and differential 2-R optical receivers. They are suitable for 10G applications such as datacom, DWDM systems, SONET/SDH systems, and telecom short/intermediate/long haul systems. Both modules have sensitivity of -22 dBm typical at 9.9 Gb. R601APD has single-ended type K connector, and R602APD has dual, push-on GPPS/SSMP connectors.

Communications Specialties, Inc.
Hauppauge, NY 11788
Mar 13, 2002 Pure Digital Fiberlink® 4040 Series fiber optic transmission system offers all digital transmission of 4 audio channels over single-mode or multi-mode fiber. Channels may be used to transmit 2 sets of stereo signals, or to support 4-channel surround sound. Audio channels may be configured for either balanced or unbalanced input and output, with or without input termination. System operates on 20-20 kHz bandwidth and is available in box or rack card version.

Discovery Semiconductors
Cranbury, NJ 08512
Feb 20, 2002 DSC-R601 provides type K coaxial RF output, and has single-ended limiting amplifier providing constant -300 mVpp to following stages with optical input powers from -20 to +0 dBm. DSC-R602 provides dual sub-miniature coaxial outputs, and has differential limiting amplifier providing constant -600 mVpp to following stages with optical input powers from -20 to +0 dBm. Applications include DWDM systems, SONET/SDH systems and datacom systems.

Stratos Lightwave Inc.
Chicago, IL 60706 4549
Feb 20, 2002 Small form factor SFF 2x5 and small form-factor pluggable SFP transceivers operate at 2.5Gb/s and are packaged in MSA-compliant, all-metal housing for EMI and RFI protection. Low-profile devices are hot-pluggable, fit in mezzanine card systems or 2x5 SFF sockets, and use standard LC fiber optic interface. Applications include heavy-traffic environments such as servers, remote storage devices, and multi-processor systems.

Discovery Semiconductors
Cranbury, NJ 08512
Feb 14, 2002 Model R202, for LIDAR and eye safe free space applications, works in 1.2 to 2.2 micro spectrum, and operates in 3 GHz range with peak gain of 20 dB. Lower frequency limit is 30 KHz, but it can be ordered with dc option. Receiver has compact hermetic package, and comes with choice of optical input connector and type K coaxial RF output.

Discovery Semiconductors
Cranbury, NJ 08512
Feb 09, 2002 Model R406 provides FWHM response over 18-34 GHz range with peak gain of 20dB. Model R407 provides same response over 34-49 GHz range with peak gain of 24dB, and Model R408 covers 39-64 GHz range with peak gain of 20dB. Hermetically sealed modules can be used for hybrid fiber/wireless systems, distribution of RF carriers, as well as optical phased-array radar. Units are available with choice of optical input connector, and type K or V coaxial RF output.