Omron Electronics LLC
Schaumburg, IL 60173
Jan 23, 2008 Supporting HDMI rev1.3 requirements, P1TX4C-SX51 Transmitter Optical Subassembly and P1RX4C-SX51 Receiver Optical Subassembly enable single link that carries bi-directional communication in parallel to high-speed data. HDMI rev1.3 specifications allow for Deep Color support, which utilizes up to 16 bits per pixel, as well as true lossless audio playback through Dolby TrueHD and DTS-HD audio formats.

ColorChip LTD.,
Caesarea 38900  Israel
Jan 23, 2008 GEPON (EPON) PX10 Triplexer transceivers feature digital receiver sensitivity at minimum -26.5 dBm and Video PIN based receiver optimized for reception of up to 870 MHz analog video signals with minimal CNR of 46 dB. Systems are based on SystemOnGlass(TM) concept and have 1,550 nm video overlay requirement, with additional video overlay channel integrated into PLC chip.

Motorola, Inc.
Schaumburg, IL 60196 4041
Jan 14, 2008 Comprising various single- and double-tuner host set-top solutions, DCX series offers HD video and surround sound audio capabilities that enable reception of on-demand and interactive digital cable programming. Model DCX3400 includes DVR capabilities, and all models offer multimedia hub capabilities that enable stored content to be shared with other compatible devices. Along with MPEG-2 and MPEG-4 technologies, STBs incorporate 1 GHz tuners and DOCSIS® downstream channel bonding.

Ethernet Direct
Newark, DE 19702
Nov 09, 2007 Equipped with 6 port 10/100/1000T plus 2 SFP ports, Model HMG-628G Managed Industrial Gigabit switch offers gigabit connectivity on every port, and supports Dual Homing and Ring Coupling. It enables users to mix and match fiber interfaces, depending on their existing network structure. IP security function supports 10 IP address accounts for system management security for Web, SNMP, and Telnet management security to prevent intruder.

Micrel Semiconductor Inc.
San Jose, CA 95131
Jul 24, 2007 Single-chip programmable SERDES, Model SY87725L, supports multiple Passive Optical Network standards and rates including asymmetric Gigabit Passive Optical Network with data rates up to 2.5 Gbps on receive side and 1.25 Gbps on transmit side. It offers complete clock recovery and data retiming circuitry, along with integrated 4-bit serial-to-parallel data converter on receive side. On transmit side, device includes synthesizer with integrated 4-bit parallel-to-serial data converter.

Emcore Corp.
Somerset, NJ 08873
Apr 25, 2007 Based on 1,300 nm Fabry-Perot emitter and detector technologies, Model ERM-7800-SFP optical transceiver for 10 GbE features linear receive path to enable use of electronic dispersion compensation (EDC). Module features power consumption of less than 1.5 W and operates over 0-70°C range in SFP+ form factor to enable high port densities for 10 GBps systems. Unit is compliant with SFP+ MSA, IEEE 802.3aq LRM standard, and RoHS 6 requirements.

NEC Corporation
Tokyo 108-8001  Japan
Apr 18, 2007 Leveraging Planar Lightwave Circuit technologies with AZNA's extended-reach Chirp Managed Laser technology, 10 Gbps XFP Transceiver is suited for 160 km links without dispersion compensation. Chirp Managed Laser allows passive optical alignment and uses standard DFB laser and passive optical spectrum reshaper filter to achieve extended reach.

Emcore Corp.
Somerset, NJ 08873
Apr 13, 2007 Intended for long reach, 10 Gbps applications, DWDM Model EDW-9100-XFP consists of transmitter with cooled 1,550 nm EML and high-sensitivity receiver with APD photodetector. Transceiver operates over temperature range of 0-70°C and offers optimum heat dissipation and electromagnetic shielding, enabling high port densities for 10 Gbps systems. Key options include C-Band and L-Band coverage at 100 GHz ITU-grid spacing, as well as private labeling.

ColorChip LTD.,
Caesarea 38900  Israel
Apr 10, 2007 Offered as single fiber, 3-channel full duplex module, Meteor III Triplexer Transceiver Platform combines WDM optics for 1,310 and 1,490 wavelengths for voice and data as well as 1,550 wavelength for RF CATV on PLC chip. Control circuitry stabilizes average optical power output and transmitter extinction ratio to ensure stable performance of module for FTTH ONT applications. Product supports BPON and GPON optical transceiver modules and is configurable to support FSAN compliance.

Emcore Corp.
Somerset, NJ 08873
Apr 10, 2007 ETU-9C00-SFF is a multi-purpose full band tunable optical transceiver module for 10 Gbps DWDM Long Reach telecom and datacom applications. Design provides wave-locked 50 GHz channel spacing on the ITU-grid and is tunable across entire C- band. It is suited for high performance telecom applications that require SDH STM-64, SONET OC-192, or 10GBASE-ZR transmission. Mach-Zehnder transmitter supports applications requiring less than 2 dB dispersion penalty through 100 km of fiber.

Ethernet Direct
Newark, DE 19702
Jan 17, 2007 Models HMG-828 and HMG-628G Husky Series Industrial Managed GbE Switches feature SFP ports with fiber slot design allowing insertion of multi- or single-mode fiber modules. SFP single mode transceivers come in typical 10 km and overhaul 40 and 80 km distances. Switches automatically detect gigabit cable connection priority for each Gigabit port, and can be remotely configured by web browser, SNMP, Telnet, CLI, or menu-driven management system.

Firecomms Ltd.
Cork   Ireland
Jan 12, 2007 Available in housing with OptoLock(TM) Plastic Optical Fiber Port, EDL300 Plugless Transceivers are suited for 100 Mb Ethernet applications with stringent quality of service requirements such as IPTV gateways, set-top boxes, and hubs. Design of OptoLock enables fiber to be cut and terminated to exact required length on site. It is mechanically and electrically interchangeable with SMI connectors enabled by EDL300 transceivers.

Broadcom Corp.
Irvine, CA 92618
Jan 03, 2007 Leveraging DSP technology, BCM8706 10GbE PHY device enables IT professionals to preserve existing multi-mode and single-mode fiber infrastructures by providing upgrade path from 1 to 10 Gigabit Ethernet. DSP equalizer provides optimal performance over 300 m of multi-mode fiber. In support of SFP+ optical module standard, BCM8706 incorporates multi-tap transmit pre-emphasis to compensate for FR-4 board material loss in line card applications.

Mercury Computer Systems, Inc.
Chelmsford, MA 01824
Nov 13, 2006 Component of integrated COTS offerings, Echotek(TM) Series ECV4-RFT 6U Wideband Remote Fiber Transceiver is used in applications requiring 274 Mbps and higher wideband data links that require blend of wideband I/O from dual 1.5 GS/sec 8-bit A/D converters and dual 1.2 GS/sec 14-bit D/A converters. Onboard Xilinx Virtex(TM)-4 FPGA reconfigurable processing resources enable multi-board coherent processing in distributed systems.

Texas Instruments, Inc. (TI)
Dallas, TX 75243-4136
Aug 18, 2006 Qualified to MIL-PRF-38535 Class V, 1.6-2.7 Gbps TLK2711HFGQMLV Serializer/Deserializer is suited for high-speed backplane interconnect and point-to-point data link applications. Radiation-hardened unit provides 2.5 Gbps I/O data channels for baseband data transmission over controlled impedance media of approximately 50W. Transmission media can be PCB, copper cables or fiber optic cable. Unit uses 2.5 V power supply and draws less than 500 mW.

American Fibertek Inc.
Somerset, NJ 08873
Aug 03, 2006 Series 93287SL Singlemode Fiber Optic Multi-channel System provides 48 channel input and output of 10-bit digitized video with bi-directional Ethernet channel, bi-directional multi-protocol data channel, and bi-directional audio channel on one singlemode optical fiber. Transmission can be via 10/100 Base T or Gigabit Ethernet. Status is provided by visual indicators or remote web based system. 94887SL Series is suited for surveillance systems with multiple cameras in different locations.

Fiberxon
Santa Clara,, CA 95054
Jul 27, 2006 With Digital Diagnostic Monitoring interface on both ends, GPON Class B+ Transceivers are compatible with both reset and reset-less GPON system design. Units can recover every bit of incoming optical signal running in burst mode and offering 28 dB loss budget and 20 dB dynamic range without power leveling scheme. RoHS-compliant transceivers support Multimedia over Coax Alliance functionality and operate in industrial temperature range.

MRV Communications, Inc.
Chatsworth, CA 91311
May 30, 2006 Digital Video Small Form Factor Pluggable Transceivers allow transport of uncompressed high-definition video over standard fiber optic networks. Each unit has coaxial cable connector that takes digital video feed from camera or production system, and feeds it into SFP-based system that converts sight into fiber optic signal. Transceivers use encoding algorithm based on EG-34 industry standard to transport SDI and HD-SDI data.

Bookham, Inc.
San Jose, CA 95134
Apr 13, 2006 Designed to increase networking equipment port density while avoiding resulting thermal challenges, IGF-42312 multi-protocol, 10 km reach transceiver supports SONET/SDH SR-1/I-64.1, 10G Ethernet, and 10G Fibre Channel applications - including FEC rates. It surpasses 1,000 hr interim phase of Telcordia Generic Reliability Assurance Requirements for Optoelectronic Devices used in Telecommunications (GR-468-CORE) qualification testing.

Emcore Corp.
Somerset, NJ 08873
Apr 06, 2006 Designed to optimize performance of 10GBASE LRM modules, 1310 TOSA and linear ROSA 10Gbps transmit and receive pair exhibit typ OMA sensitivity of -17 dBm. LRM ROSA includes 10Gbps InP PIN photo-detector, transimpedance amplifier, and LC or SC optical barrel. ROSA has differential output and remains linear over input power range defined in LRM standard. Product is optimized to work with electronic dispersion compensation ICs to meet LRM module linear requirements.