Melexis Inc.
Concord, NH 03301
Jul 11, 2008 Available in 24 pin SOIC package that is compatible with lead free SMD processes, MLX75605 embeds 650 nm light source, 150 Mbps driver IC, and 150 Mbps monolithic receiver IC. LED driver IC includes on chip calibration circuitry, allowing user to trim transmitter light output, and in this way light output is within narrow distribution over -40 to +95°C temperature range. Receiver features integrated ferrule receptacles of both receiver and transmitter pigtails, and eye safe light output.

Agilent Technologies, Inc.
Palo Alto, CA 94303
May 12, 2008 Facilitating design and validation testing, 86116C Option 025 provides reference receiver capabilities for 100-G Ethernet and 16X Fibre Channel signals. Module works with 1,310 nm and 1,550 nm single-mode transmitters, and characteristically has 45 GHz optical and 93 GHz electrical unfiltered bandwidth. Used in 86100C DCA-J oscilloscope mainframe, unit helps engineers investigate, design, and verify performance of transceivers that terminate optical fibers for LANs and SANs.

HARTING, Inc. Of North America
Elgin, IL 60123 5538
Mar 19, 2008 Suited for hazardous industrial environments, M12 microFX data transmission system is comprised of active transceivers with diagnostic function for optical data transmission up to 125 Mbps as well as corresponding connectors for multimode glass fiber. In addition to 2 optical contacts for data transmission, 2 electrical contacts for power supply of devices linked by microFX are integrated into connector. Passive coupling units are also included.

ColorChip LTD.,
Caesarea 38900  Israel
Mar 06, 2008 Intended for Gigabit Passive Optical Networks, Meteor II GPON Class B Transceiver offers reach of 20 km. Unit includes DFB laser, with typical output power of +2.5 dBm and PIN receiver with typical sensitivity of -28 dBm, for downstream bit rate of 2.488 Gbps and upstream bit rate of 1.244 Gbps.

INTEXYS PHOTONICS
L'UNION   France
Mar 05, 2008 Optimized for signal integrity, Optical Engines are manufactured using Full-Flip-Chip concept that enables integration of electronics and optics and achieves low crosstalk, fine pitch, and self-alignment properties. Available products include one (4+4) x5 Gbit/s Infiniband-compliant engine and one QSFP version as well as one (4+4) x10 Gbit/s engine. Transceivers are suited for parallel optics applications in Optical Active Cable market.

Bookham, Inc.
San Jose, CA 95134
Feb 27, 2008 Suited for long haul and metro applications, LambdaFLEX(TM) TL8000 Module combines benefits of full-band tunability with front-face plate pluggability. Unit includes Telcordia qualified InPMZ modulator and DSDBR laser transmitter, which underpin TL7000 tunable transmitter assembly and TL9000 tunable small form factor transponder. Module also includes 10 Gb/s Avalanche photo diode receiver combined with electronic dispersion compensation for low OSNR environments.

NEC Corporation
Tokyo 108-8001  Japan
Feb 27, 2008 Consisting of high-speed laser diodes, photo diodes, and transmitter/receiver LSIs integrated in 14 x 14 x 4.7 mm housing, 4-channel Parallel Fiber Optic Transceiver operates at 10 Gbps per channel for high-throughput interconnection systems. Unit includes detachable optical connector that turns input/output light signal direction perpendicular to laser array and PIN-PD array.

AdvancedIO Systems, Inc.
British Columbia V6C 2T5  Canada
Feb 25, 2008 Offering flexible processing functionality in single chassis slot, Model V1021 connects real-time embedded systems to high-speed Ethernet networks. Unit includes standard PCI-X and PCI Express® host interfaces for integration, as well as customizable functionality via Xilinx® FPGA for application optimization and in-field upgrades. Module also includes streamXG(TM) data streaming acceleration cores and software, and supports udpXG(TM) communication protocol for offloading.

Discovery Semiconductors Inc.
Princeton Junction, NJ 08550
Feb 21, 2008 Offering linearity with third order intercept point as high as 50 dBm, 40 Gbps photodiode and receiver feature differential GPPO RF outputs that enable reception of all pre-amplified and unamplified 40G modulation formats. Receiver package interfaces to commercial CDR/DEMUX modules, and products address several modulation formats: ASK, DPSK, and DQPSK. Receiver configurations include single, balanced, and dual detection schemes, with and without transimpedance amplification.

Avago Technologies
San Jose, CA 95131
Jan 25, 2008 Compliant with FC-PI-4 standards over multimode optical fiber at signaling rates from 8.5-2.125 Gbps without need for external rate select inputs, Model AFBR-57D5APZ is 8 Gbps SFP optical transceiver that provides real-time temperature, supply voltage, laser bias current, laser average output power, and received input power diagnostic information. It is available in link lengths up to 150, 300, and 500 m at 8.5, 4.25, and 2.125 Gbps, respectively.

ColorChip LTD.,
Caesarea 38900  Israel
Jan 24, 2008 Meteor II GPON Class A+ diplexer transceiver is designed for FTTH market and fits need for densely populated urban areas. Featuring Fabry Perot (FP) laser with typical output power of +1 dBm and receiver with typical sensitivity of -25 dBm, unit offers downstream bit rate of 2.488 Gbps and up stream bit rate of 1.244 Gbps.

Omron Electronics LLC
Schaumburg, IL 60173
Jan 23, 2008 Supporting HDMI rev1.3 requirements, P1TX4C-SX51 Transmitter Optical Subassembly and P1RX4C-SX51 Receiver Optical Subassembly enable single link that carries bi-directional communication in parallel to high-speed data. HDMI rev1.3 specifications allow for Deep Color support, which utilizes up to 16 bits per pixel, as well as true lossless audio playback through Dolby TrueHD and DTS-HD audio formats.

ColorChip LTD.,
Caesarea 38900  Israel
Jan 23, 2008 GEPON (EPON) PX10 Triplexer transceivers feature digital receiver sensitivity at minimum -26.5 dBm and Video PIN based receiver optimized for reception of up to 870 MHz analog video signals with minimal CNR of 46 dB. Systems are based on SystemOnGlass(TM) concept and have 1,550 nm video overlay requirement, with additional video overlay channel integrated into PLC chip.

Motorola, Inc.
Schaumburg, IL 60196 4041
Jan 14, 2008 Comprising various single- and double-tuner host set-top solutions, DCX series offers HD video and surround sound audio capabilities that enable reception of on-demand and interactive digital cable programming. Model DCX3400 includes DVR capabilities, and all models offer multimedia hub capabilities that enable stored content to be shared with other compatible devices. Along with MPEG-2 and MPEG-4 technologies, STBs incorporate 1 GHz tuners and DOCSIS® downstream channel bonding.

Ethernet Direct
Newark, DE 19702
Nov 09, 2007 Equipped with 6 port 10/100/1000T plus 2 SFP ports, Model HMG-628G Managed Industrial Gigabit switch offers gigabit connectivity on every port, and supports Dual Homing and Ring Coupling. It enables users to mix and match fiber interfaces, depending on their existing network structure. IP security function supports 10 IP address accounts for system management security for Web, SNMP, and Telnet management security to prevent intruder.

Micrel Semiconductor Inc.
San Jose, CA 95131
Jul 24, 2007 Single-chip programmable SERDES, Model SY87725L, supports multiple Passive Optical Network standards and rates including asymmetric Gigabit Passive Optical Network with data rates up to 2.5 Gbps on receive side and 1.25 Gbps on transmit side. It offers complete clock recovery and data retiming circuitry, along with integrated 4-bit serial-to-parallel data converter on receive side. On transmit side, device includes synthesizer with integrated 4-bit parallel-to-serial data converter.

Emcore Corp.
Somerset, NJ 08873
Apr 25, 2007 Based on 1,300 nm Fabry-Perot emitter and detector technologies, Model ERM-7800-SFP optical transceiver for 10 GbE features linear receive path to enable use of electronic dispersion compensation (EDC). Module features power consumption of less than 1.5 W and operates over 0-70°C range in SFP+ form factor to enable high port densities for 10 GBps systems. Unit is compliant with SFP+ MSA, IEEE 802.3aq LRM standard, and RoHS 6 requirements.

NEC Corporation
Tokyo 108-8001  Japan
Apr 18, 2007 Leveraging Planar Lightwave Circuit technologies with AZNA's extended-reach Chirp Managed Laser technology, 10 Gbps XFP Transceiver is suited for 160 km links without dispersion compensation. Chirp Managed Laser allows passive optical alignment and uses standard DFB laser and passive optical spectrum reshaper filter to achieve extended reach.

Emcore Corp.
Somerset, NJ 08873
Apr 13, 2007 Intended for long reach, 10 Gbps applications, DWDM Model EDW-9100-XFP consists of transmitter with cooled 1,550 nm EML and high-sensitivity receiver with APD photodetector. Transceiver operates over temperature range of 0-70°C and offers optimum heat dissipation and electromagnetic shielding, enabling high port densities for 10 Gbps systems. Key options include C-Band and L-Band coverage at 100 GHz ITU-grid spacing, as well as private labeling.

ColorChip LTD.,
Caesarea 38900  Israel
Apr 10, 2007 Offered as single fiber, 3-channel full duplex module, Meteor III Triplexer Transceiver Platform combines WDM optics for 1,310 and 1,490 wavelengths for voice and data as well as 1,550 wavelength for RF CATV on PLC chip. Control circuitry stabilizes average optical power output and transmitter extinction ratio to ensure stable performance of module for FTTH ONT applications. Product supports BPON and GPON optical transceiver modules and is configurable to support FSAN compliance.