ComNet
Danbury, CT 06810
Jun 01, 2009 Available for use over multimode or single mode optical fiber, F32V8DT/R(M)(S)1 Series video/data multiplexer transmitters/receivers support 32 channels of video with 8 channels of bi-directional serial data. Units offer 10-bit RS250C Short-Haul Quality video performance and can transport video up to 20 km between locations. Series is suited for applications such as airports and parking garages, which require large number of CCTV cameras and may have remote control center.

OpVista, Inc.
Milpitas, CA 95035
Jan 21, 2009 Part of OpVista CX8 Optical Networking System, CX-40G Muxponder delivers 40 Gbps transmission/wavelength across optical networks from metro to long-haul. It is based on Dense Multi-Carrier (DMC) technology and combines 4 x 10 Gbs service streams into single 50 GHz Dense Wavelength Division Multiplexing (DWDM) channel. System helps deliver multiple 10-Gbit/sec services and also eliminates issues of PMD and CD optical dispersion.

ADVA Optical Networking
Ramsey, NJ 07446
Oct 09, 2008 Integrated into ADVA FSP 3000 WDM System, Flexible Remote Node enables communications providers to serve customers from unified access and backhaul network. When located at curb, FRN can be configured as passive network element with environmentally hardened WDM filters that allow point-to-multipoint WDM-PON structure. When located at street cabinet, FRN can include active equipment such as optical amplifiers and active Ethernet technology that enable reach extension and traffic aggregation.

Bookham, Inc.
San Jose, CA 95134
Sep 25, 2008 Enabling expansion of SFP-based board design performance, transceiver can deliver output power from +3 to +6 dBm, has channel spacing of 100 GHz, and offers full C and L band coverage. Optical engines consist of Bookham Avalanche Photodiode (APD) Receiver and buried-heterostructure directly modulated laser. Able to achieve uncompensated reach of 400 km at 2.5 Gbps, solution can operate in high-noise, amplified environments and multi-span links for metro networks.

Nokia Siemens Networks
Espoo 02610  Finland
Jul 02, 2008 With multi-service and multi-reach feature set, hiT 7300 supports all reaches and transmission speeds in metro, regional, long-haul, and ultra-long haul applications on single platform. Unit has transponder cards that support traditional SONET/SDH, Ethernet, and SAN services at different speeds. Including amplifier options and end-to-end management support for all equipment configurations, it is also available in flatpack form factor suitable as CPE for tight space requirements.

Galazar Networks, Inc.
Ontario K2H 1E6  Canada
Jun 20, 2008 Suited for ROADM/DWDM applications, MXP(TM) devices address metro networking applications by combining Next-Gen SONET/SDH functions of MSPP and OTN functions of transponder to act as muxponder-on-a-chip. This helps Service Providers utilize their WDM wavelengths more efficiently by allowing them to multiplex number of revenue-generating services on single wavelength. Muxponder cards based on MXP family can address all service types, including Ethernet, SONET/SDH, SAN, and Video.

ARRIS
Suwanee,, GA 30024
Apr 16, 2008 With 1 GHz CHP CORWave, MSOs can leverage existing fiber networks for delivery of HD-On-Demand, SDV, and business services. When deployed with ARRIS OptiMax4100 4 x 4 segmentable nodes, CORWave enables multiplexing of 12 wavelengths: 4 forward, 4 return and 4 bidirectional, all on one fiber with link length of up to 25 km. When deployed with ARRIS OptiMax segmentable nodes in 2 x 2 configuration, CORWave enables longer link lengths of up to 30 km.

JDSU
San Jose, CA 95131
Feb 22, 2008 Scalable from 1 x 2 to 1 x 9 applications, Mini WSS dynamically supports unpredictable network traffic in metro and access DWDM networks. Switch incorporates all critical functions required for network equipment manufacturers and service providers to remotely add and drop network capacity or change wavelength's path based on demand, without manual intervention or rebalancing of network. Based on MEMS technology, single-slot unit provides colorless switching.

OpVista, Inc.
Milpitas, CA 95035
Jun 28, 2007 Consisting of OpVista2000 TR-110 GbE muxponder, TR-71 10GbE transponder, and Layer 2 functionality, EtherWave(TM) meets network requirements for Ethernet architectural and operational efficiency by combining 10 GbE client side signals into one 10-G ITU-compliant DWDM wavelength on network side. OpVista can handoff 10GbE signal to router located in central office or hub node facility, with individual GbE streams tagged separately to allow distribution to appropriate service.

Emcore Corp.
Somerset, NJ 08873
Apr 13, 2007 Intended for long reach, 10 Gbps applications, DWDM Model EDW-9100-XFP consists of transmitter with cooled 1,550 nm EML and high-sensitivity receiver with APD photodetector. Transceiver operates over temperature range of 0-70°C and offers optimum heat dissipation and electromagnetic shielding, enabling high port densities for 10 Gbps systems. Key options include C-Band and L-Band coverage at 100 GHz ITU-grid spacing, as well as private labeling.

Luminent Inc.
Chatsworth, CA 91311
Dec 14, 2006 Covering distances of 10, 40, 80 km, fibre channel CWDM and DWDM interfaces support multi-rate operation at baud rates of 4.25, 2.125, and 1.062 Gb/s, respectively, and Ethernet rate of 1.25 Gbps. CWDM family is available in 18 wavelengths ranging from 1270-1610 nm, while DWDM family supports 46 channels in C-band, from ITU channel 15 through 61.

Pirelli Broadband Solutions
Milano   Italy
Oct 24, 2006 Featuring Dense Wavelength Division Multiplexing (DWDM) capability, LWDM platform supports 6 CWDM wavelengths operating at 2.5 Gbit/sec, and 16 DWDM wavelengths operating at 2.5/10 Gbit/sec for total capacity of 175 Gbit/sec on single platform. DWDM channels support optical amplification and allow links up to 200 km without use of dispersion compensation.

FCI
Etters, PA 17319
Oct 09, 2006 Based on Canstar(TM) technology, FCI Fiber Optics product line is comprised of fiber optic multimode/single-mode couplers, splitters, taps, wavelength division multiplexers (WDMs), cable assemblies, and adaptors. Couplers are offered for various design specifications, including one-in, many-out couplers; WDMs; and one-in, 2-out couplers available as even- or ratio-split. FCI attenuators, or one-in, one-out couplers for attenuating all wavelengths, are also available.

Novera Optics Inc.
SantaClara, CA 95054
Sep 12, 2006 TurboLIGHT(TM)16 dense wavelength division multiplexing (DWDM) fiber-to-the-x (FTTx) optical access transport platform acts as passive optical network (PON) system that delivers 20 Gbps of symmetrical bandwidth over single feeder fiber. Based on Lambda-PON(TM) automatic wavelength-locking technology, product carries 16, 125 Mbps to 1.25 Gbps bidirectional data streams using 32 independent wavelengths. System comes in modular and complete system forms, both with mixed-mode capabilities.

Weed Instrument Co., Inc.
Round Rock, TX 78680
Jul 19, 2006 Designed to multiplex CEMS 4-20 mA and 0-10 Vdc output signals at coal-fired power stations, Fiber Optic Converters monitor sulphur dioxide, nitrogen oxides, and particulate matter. Providing bi-directional communications, Series 2Mxx sends and receives up to 8 analog or digital signals over pair of fiber optic cables. Conversion of analog signals to fiber overcomes application issues such as EMI/RFI, lightning strikes, and ground loop problems.

4Wave, Inc.
Sterling, VA 20166
Apr 03, 2006 Small form factor receive optical sub-assembly, Quad LX4 ROSA multi-filter chip is a 4-channel CWDM optical component consisting of 4 optical filters deposited on single piece of fused silica and used to demultiplex the 10Gbps data into 4 separate 2.5 Gbps channels. Each channel is fitted with its own high-speed photo detector and transimpedance amplifier. Product is designed for use in X2/XPACK transceiver modules.

Beijing Fibridge
Beijing,   China
Apr 19, 2005 Model E1 PDH can combine up to 16 E1 and 4-port Ethernet signals in one fiber channel. With 6U height and up to 24 optical channels, unit is suitable for low capacity, point-to-point remote transmission applications. It includes 48 Vdc power supply, complete alarm functions, one RS232 asynchronous interface, and remote loop back functions.

Beijing Fibridge
Beijing,   China
Apr 19, 2005 Fiber optic, digital multiplexer transmits 2–64 channels of uncompressed video, 2–32 channels of bi-directional data and audio, as well as 4 E1 and 100 M Ethernet over single fiber cable. It features ability to add/drop video, audio, RS232/RS422/RS485, E1, and 100M Ethernet ports by plugging in or out service cards. Applications include CCTV, video surveillance, homeland security, and ITS.

Communications Specialties, Inc.
Hauppauge, NY 11788
Oct 13, 2004 Fiberlink® 6400 Series Passive Optical WDMs allow 2 separate fiber optic links to operate at different wavelengths over same fiber optic core. Each optical signal may carry multiple baseband video, audio, and data channels. Optical signals are transmitted at 850 and 1,310 nm over multimode fiber or 1,310 and 1,550 nm over single mode fiber. Insertion loss ranges from 0.5–2.0 dB per output. Units are available in card or box versions with ST or FCPC connectors.

International Fiber Systems Inc
Newtown, CT 06470
Sep 23, 2003 Environmentally ruggedized to meet NEMA TS-1/TS-2 requirements, plug-and-play D8000 Series fiber optic, 8-channel, full-duplex, serial data multiplexer can transmit up to 8 serial data signals over one or two multi-mode or single-mode optical fibers. Each channel may be independently configured for RS-232, RS-422, or RS-485 with 2 or 4-wire operation with tri-state. Single-mode version supports optical transmission distances of up to 37 miles.