Megladon Manufacturing Group, Ltd.
Austin, TX 78758
Nov 18, 2009 Placed between OTDR and link under test, Pulse Suppression Box delivers consistent test results in network certifications. Unit serves as dead zone elimination tool as well as reference grade fiber cable that provides accurate field testing and predictable calibration. Housed in drop resistant, waterproof case, Pulse Suppression Box assemblies use Hardened Lens Contact termination process and SCRATCHGUARD technology for all major glass and connector types.

Molex Inc.
Lisle, IL 60532-1682
Nov 17, 2009 Offering copper and optical direct attach options for same system port, iPass+(TM) enables 12 channels of 10 Gbps data for up to 120 Gbps of total bandwidth. High-Speed Channel (HSC) pluggable CXP copper and optical interconnect system features unitary press-fit connector and cage assembly that provide one-step placement to host board. CXP 12X direct attach copper cables accommodate single, ganged, or stacked connector configurations in high-density requirement applications.

Tyco Electronics Corp.
Harrisburg, PA 17105-3608
Oct 23, 2009 Designed for low profile, SC cutout adapter, shuttered duplex LC adapters include slip-on retractable cover within standard cutout for enhanced eye protection. Single door design allows for one-handed connector installation, and other available product offerings include flanged and flangeless plastic configuration, secure adapters, and metal flanged adapter styles. Product serves data communication and telecommunication industries.

HARTING, Inc. Of North America
Elgin, IL 60123 5538
Jul 21, 2009 Comprised of outdoor rated fiber optic cable pre-assembled with outdoor rated PushPull LC connector, LC fiber optic cable assemblies achieve low loss over long distances with high data-carrying capacity. They feature 2-fiber multimode, wavelength of 850 and 1,310 Nm, and are immune to electromagnetic interference (EMI). IP65/IP67 rated, ready-to-install cable assemblies are offered in various lengths, as well as in single-ended versions.

Corning Cable Systems
Hickory, NC 28603-0489
Jun 29, 2009 Designed for data centers, high-density LANscape® Pretium® Evolved-Density, Growth-Enabled (EDGE) solutions feature preterminated multi-fiber assemblies, or trunks, with minimum bend radius as small as 5 times OD of cable. Cable can be tightly routed around corners and bends, and extra slack can be coiled without causing attenuation. Interconnect cables offer bend radius of up to 8 times OD, while housings are available in 1U and 4U sizes and mount in 19 in. racks or cabinets.

Optec Technology Limited
Kowloon   Hong Kong (prc)
Jun 24, 2009 Suited for demanding applications such as fiber-to-the-desk (FTTD), broadcasting, FTTx, and harsh environment networks, armored cable assemblies have stainless steel metal tubing within cable coating to protect fiber inside cable. Protective metal tubing also prevents damage from rodent bites. Product is available with choice of fiber connectors including LC, FC, SC, ST, MTRJ, and E2000, as well as type of polish including APC, UPC, and PC.

Y-Connect, Inc.
Middletown, PA 17057
Jun 17, 2009 Duplex and Quad LC Adapters include modularized multiport dust shutter providing dust as well as eye protection for Class III A and lower lasers. Units offer secure panel mount latching and are compatible with T.I.A. FOCIS 10B duplex and quad panel cutouts, allowing users to double connection densities using existing simplex or duplex SC adapter panel cutouts, respectively. Available in MM, SM, and APC, products meet UL 94 V-0 flammability requirements and are RoHS compliant.

Y-Connect, Inc.
Middletown, PA 17057
Jun 17, 2009 Suitable for singlemode (SM) and multimode (MM) applications, SC and LC adapters are available with phosphorous bronze sleeve and provide reliable connections between SC and LC connectors. Simplex LC-SC Hybrid adapter is designed with secure panel mount latching and compatible with TIA FOCIS 10B. LC-SC Hybrid adapter, available in MM and SM is offered in blue, beige, green, and black; meets UL 94 V-0 flammability requirements; and is RoHS-compliant.

Vytran
Morganville, NJ 07751
Jun 16, 2009 Using Graphite Filament Fusion technology, Model PSX-3000 produces clean, low-loss splices in standard and large mode area double-clad fibers. True Core Imaging(TM) and Active Alignment technology provide precise core alignment and splice loss determination, while Windows-based laptop PC interface offers configuration and control, and database records all splicing data. Model PSX-3000 can be set up as simple splicer or as integrated system with cleave, clean, splice, and recoat capabilities.

GAO FiberOptics Inc.
Toronto   Canada
May 29, 2009 Designed for splicing dispersion shifted, non-zero dispersion shifted, and erbium doped fibers, single fiber fusion splicer GAO1202 has auto-check end-face of fiber function, auto-calculation of splicing loss and auto-select suitable fusion program. Mechanical splices typically only have 0.01-0.02 dB loss. Unit automatically adjusts to environmental conditions such as temperature and humidity. Pressure sensors provide constant feedback control for regulation of fusion arc temperature.

Neutrik AG
Lakewood, NJ 08701
May 28, 2009 Rated IP65 for dust tight and water jet protection, opticalCON QUAD provides fiber solution for any live event. System is available with 4-channel mobile field cables, as well as triple-split 12-channel assemblies featuring 3 opticalCON-4 connectors on both ends, allowing standardized 4-channel connectivity for multi-channel point-to-point cabling. Offering cut-proof and rodent-resistant double jacket with glass yarn armored cable, QUAD X-treme is suitable for road-ready applications.

Siemon Co., The
Watertown, CT 06795
May 13, 2009 Available in multi-mode and single-mode fiber types, MTP Plug-and-Play Cabling System is constructed of fiber optic cable and components for future-proof support of critical data center links, including 10 Gb/s as well as future 40 and 100 Gb/s applications. It includes plug-and-play modules providing up to 24 LC or 12 SC connections, pass-through adapter plates that support up to 6 MTP-to-MTP connections, and pre-terminated MTP-to-MTP and MTP-to-LC cable assemblies.

Corning Cable Systems
Hickory, NC 28603-0489
Mar 27, 2009 LANscape® Industrial Connector Housing (ICH) series accommodates conduit with concentric knockouts or rubber grommets. Units have padlock-capable outer door as well as separate inner door that protects provider side of unit from unauthorized access. Likewise-lockable Industrial Splice Housing (ISH) series is wall-mountable for transition splicing between cable at building entrance or pigtail splicing, providing storage and protection of fiber splices in individually accessible trays.

Molex Inc.
Lisle, IL 60532-1682
Mar 26, 2009 LumaCore(TM)-based ARINC optical inserts for ARINC connectors feature precision alignment pins and removable sleeve assemblies to simplify inspection and cleaning of termini, optimizing connector performance in harsh environments. Termini densities from 32-72 fibers are available. Mounting hardware is included and units are designed so that users can select ARINC frame cavity for mounting.

Weidmuller, Inc.
Richmond, VA 23236
Mar 25, 2009 NetBloc terminal units provide network connection and network cable management on 35 mm DIN-rails, simplifying organization, managment, and labeling of network connections. Devices are available in 4 RJ45 versions, 6 fiber optic versions, as well as USB-to-USB version for connecting laptop computers or other USB devices to network. All feature earth grounding option, switched on or off during operation, for grounding shielded network connection to DIN-rail to minimize noise or ground loops.

B & R Industrial Automation Corp.
Roswell, GA 30076
Mar 04, 2009 Targeted at industrial Ethernet use, X20 hub system has 100Base-FX underlying standard, and is based on duplex LC technology. There is no loss of performance (wire speed), as internal downgrading technology is not used. Unit also comes with 2 RJ45 connections.

Electro Standards Laboratories
Cranston, RI 02921 3403
Feb 17, 2009 High density, pre-terminated Fiber Optic Cassette Model 6008 breaks out 1 MTP® 8-strand fiber cable into 8 single strand singlemode Military Style ST connectors. Cabling side (rear) contains MTP® interface for connecting trunk or backbone cabling, while optical assembly within cassette interconnects rear and front ports. System helps save duct space and installation time, when patch cords from equipment are plugged into front-panel Military Style connectors.

Tyco Electronics Corp.
Harrisburg, PA 17105-3608
Feb 13, 2009 Available in aluminum or corrosion resisting steel, Raychem MTCT modular rectangular connectors accept standard ARINC 801 LuxCis(TM) optical termini in compact, lightweight design. Four-position MTCT connectors feature quarter-turn bayonet quick disconnect or jackscrew mating hardware, keying, and fluorosilicone interfacial seal. Enhanced mating interface ensures optical alignment of termini, and only commonly available tools are required for installation.

Tyco Electronics Corp.
Harrisburg, PA 17105-3608
Feb 12, 2009 Offered in Quad Small Form-factor Pluggable (QSFP) connector format, PARALIGHT cable assemblies deliver 40 Gb/sec Quad Data Rate (QDR) speed and can run up to 100 m, with longer lengths being evaluated. Low weight and small size facilitate effective routing of significant numbers of cables in clustered systems. Cable assemblies are suited for applications in intra- and inter-cabinet links.

3M Co., Electronic Products Div.
Austin, TX 78726
Jan 07, 2009 Suited for restoration or permanent splicing, Fibrlok products enable accelerated, on-site installation of 250 micron and 900 micron fiber for analog video applications. Fibrlok II Angle Fiber Splice 2529-AS, designed for CATV or FTTH networks, can splice any combination of 250 micron and 900 micron fibers. Fibrlok 250um Angle Fiber Splice 2540-AS can splice 250 micron fiber with smaller form factor. Both deliver minimal optical reflections across temperature extremes.