Qualcomm, Inc.
San Diego, CA 92121
Jun 03, 2008 Supplied in 3.2 x 2.9 mm CSP, BTS4025(TM) SoC offers up to +13 dBm transmit power through integration of on-chip power amplifier to enhance connection reliability and range between Bluetooth device pairs. Product offers full support for Bluetooth 2.1 + Enhanced Data Rate specification, requires minimal external components, and can use existing system clock. To extend battery life, SoC reduces standby current consumption up to 50% when device is scanning for other Bluetooth devices.

Fairchild Semiconductor
San Jose, CA 95134
May 21, 2008 With built-in active dv/dt clamp that provides noise immunity (dv/dt) of 10,000 V/µs, random-phase FOD420 and FOD4208 facilitate solid state relay, AC motor control, and lighting ballast design. RoHS-compliant products provide 5,000 V of isolation while controlling power triacs that switch load. They utilize Pb-free terminals and can be used in conjunction with discrete power triacs.

Thinklogical
Milford, CT 06460
May 13, 2008 Designed for broadcast and post-production, ImageEvolution video processor is suited for image correction and scaling while also functioning as video converter that supports HDMI, SDI, and HD-SDI. It has Gennum VXP(TM) image processor and offers multi-mode fiber ports for video extension up to 3,280 ft. Also available, ImageEvolution HDMI Repeater for distribution of one of 2 HDMI/DVI video sources to 4 digital displays, simultaneously, with identical reproduction and no signal loss.

HOLOEYE Corp.
Laguna Hills, CA 92653-1340
May 12, 2008 Based on reflective LCOS microdisplays with 1,920 x 1,080 pixel HDTV resolution, PLUTO phase only spatial light modulators feature pixel pitch of 8.0 µm, image refresh rate of 60 Hz, and pure phase shift of 2 Pi up to 1,550 nm. PLUTO-VIS, PLUTO-NIR, and PLUTO-TELCO are optimized for 420-850, 850-1,100, and 1,550 nm wavelengths, respectively. They are suitable for applications such as wave front correction, optical tweezers/metrology, interferometry, lithography, or holography.

Agilent Technologies, Inc.
Palo Alto, CA 94303
May 12, 2008 Facilitating design and validation testing, 86116C Option 025 provides reference receiver capabilities for 100-G Ethernet and 16X Fibre Channel signals. Module works with 1,310 nm and 1,550 nm single-mode transmitters, and characteristically has 45 GHz optical and 93 GHz electrical unfiltered bandwidth. Used in 86100C DCA-J oscilloscope mainframe, unit helps engineers investigate, design, and verify performance of transceivers that terminate optical fibers for LANs and SANs.

Toshiba America Electronic Components (TAEC)
Irvine, CA 92618-1811
May 02, 2008 Supplied in 4-pin, 6.5 x 4.6 x 3.5 mm plastic DIP, general-purpose TLP781 consists of silicone photo-transistor optically coupled to gallium-arsenide IR emitting diode. Solution meets reinforced insulation class UL, BSI, SEMKO, and VDE international safety standard requirements; offers isolation voltage up to 5,000 V(rms); and has 7.62 mm lead pitch. Variation with wide lead spacing (10.16 mm pitch), TLP781F, is also available.

Weidmuller, Inc.
Richmond, VA 23236
May 01, 2008 Industrial Ethernet connectors provide IP67 solutions for copper and fiber optic cabling across all Ethernet standards. Connector plug and bulkhead housings in die cast zinc, polyamide plastic, and die-cast aluminum, are available in Ethernet/IP, Ethernet TCP/IP, and PROFINET® versions. Each version is completely sealed to withstand extreme environmental conditions. STEADYTEC® cable pass-through design accepts shielded cables up to AWG 22 and allows 8-wire cables to be used.

ARRIS
Suwanee,, GA 30024
Apr 16, 2008 With 1 GHz CHP CORWave, MSOs can leverage existing fiber networks for delivery of HD-On-Demand, SDV, and business services. When deployed with ARRIS OptiMax4100 4 x 4 segmentable nodes, CORWave enables multiplexing of 12 wavelengths: 4 forward, 4 return and 4 bidirectional, all on one fiber with link length of up to 25 km. When deployed with ARRIS OptiMax segmentable nodes in 2 x 2 configuration, CORWave enables longer link lengths of up to 30 km.

BEI Industrial Encoder Division
Goleta, CA 93117
Apr 11, 2008 Designed for motion control applications, SwiftComm provides wireless signal in real-time over secure network and can interface with existing control systems. Transmitter-receiver pair communicates using point-to-point frequency-hopping 2.4 GHz RF protocol. Radio protocols include broad security code range, data encryption, handshaking, and error checking. Other features include NEMA 4 weatherproof enclosures, panel mounting options, variety of antennas, and wide range of dc power inputs.

PacketLight Networks Ltd.
Tel-Aviv 69710  Israel
Apr 11, 2008 Providing integrated optical amplifier, 3R functionality, and Mux/DeMux, Model PL-1000 supports data, storage, voice, and video over CWDM and DWDM networks and dark fiber. It also supports variety of services such as 10GBASE-R, 10GBASE-W, STM-64/OC-192, 10G FC, and OTU-2 in any mix. Capable of connecting multiple 10G Ethernet interfaces over distances of up to 120 km, solution features 2 out-of-band Optical Supervisory Channels (OSC) for HTTP and SNMP based management.

Optek Technology, Inc.
Carrollton, TX 75006-6905
Apr 09, 2008 Analog output OP1A400 Series, analog output OPIA500/600 Series, as well as analog or digital Photologic® output OPIA/D800 Series are UL- and VDE-certified devices that provide electrical isolation for high-voltage power systems. Offering typical isolation voltage of 2,500, 3,750, and 5,000 V RMS, products are designed for applications that require either analog or digital output in dual-in-line package, with either single or dual LED transmitter.

ITT Industries, Cannon
Santa Ana, CA 92705-5612
Apr 08, 2008 Meeting/exceeding Lucent 640-252-053 and Telcordia GR-326 requirements, Cannon PHD SuperLC fiber optic connector targets military/aerospace, telecom, and industrial data communications applications. Tunable optical cartridge functions as standalone optical element separate from connector housing, and accepts multi-mode or single-mode ferrules. Locking mechanism prevents thermal stress of latch, while crimp termination of cable to rear body ensures quick field repair.

Electro Standards Laboratories
Cranston, RI 02921 3403
Apr 04, 2008 Model 4149 high speed ruggedized Fiber-to-RS485/422/232 interface converter offers operating speeds of 1.5 Mbps for RS232 to fiber conversion and 20 Mbps for RS485/422 to fiber conversion. Operating from -40 to +85°C, it features protection circuitry on all receivers and transmitters for both RS232 and RS485/422 interfaces. Unit can be powered from wide input range of 9-36 Vdc, and from 4.5-9 and 18-72 Vdc voltage ranges for other models.

Belden
Richmond, IN 47375
Mar 26, 2008 Designed to meet demand for smaller and lighter weight equipment, tactical fiber optic cables are compatible with all optical fiber connector types and may be repeatedly used without compromised performance. Compact round cables, covering wavelengths from 1,260-1,625 nm, have fibers that can be coiled into 32 or and 20 mm dia loop. Offered in 6 standard product codes with up to 12 fibers, cables exhibit resistance to sunlight, chemicals, flames, abrasion, crushing, and cut-through.

HARTING, Inc. Of North America
Elgin, IL 60123 5538
Mar 19, 2008 Suited for hazardous industrial environments, M12 microFX data transmission system is comprised of active transceivers with diagnostic function for optical data transmission up to 125 Mbps as well as corresponding connectors for multimode glass fiber. In addition to 2 optical contacts for data transmission, 2 electrical contacts for power supply of devices linked by microFX are integrated into connector. Passive coupling units are also included.

HARTING, Inc. Of North America
Elgin, IL 60123 5538
Mar 19, 2008 HARTING PushPull LC Duplex integrates PushPull technology with inserts for fiber optic systems. Integration of standard LC fiber optic connectors, in single-mode and multimode, is suitable for harsh outdoor environments. Robust interfaces also offer vibration and IP 67/65 protection as standard. Connectors are suited for applications such as FTTA (Fiber To The Antenna), FTTH (Fiber To The Home), or WiMAX.

Everlight Electronics Co. Ltd.
TAIPEI   Taiwan
Mar 10, 2008 Encompassing 21 devices with choice of peak blocking voltages from 250-800 V, EL30XX Series random-phase and zero-cross optocouplers suit interface applications between low-current dc control circuits and ac power loads up to 380 V. Zero-cross versions include zero-crossing detection circuit connected to gates of silicon-controlled rectifiers, eliminating current surges and minimizing EMI. Housed in 6-pin DIP package, optocouplers offer 5, 10, and 15 mA low-trigger currents.

ColorChip LTD.,
Caesarea 38900  Israel
Mar 06, 2008 Intended for Gigabit Passive Optical Networks, Meteor II GPON Class B Transceiver offers reach of 20 km. Unit includes DFB laser, with typical output power of +2.5 dBm and PIN receiver with typical sensitivity of -28 dBm, for downstream bit rate of 2.488 Gbps and upstream bit rate of 1.244 Gbps.

INTEXYS PHOTONICS
L'UNION   France
Mar 05, 2008 Optimized for signal integrity, Optical Engines are manufactured using Full-Flip-Chip concept that enables integration of electronics and optics and achieves low crosstalk, fine pitch, and self-alignment properties. Available products include one (4+4) x5 Gbit/s Infiniband-compliant engine and one QSFP version as well as one (4+4) x10 Gbit/s engine. Transceivers are suited for parallel optics applications in Optical Active Cable market.

Tyco Electronics Corp.
Harrisburg, PA 17105-3608
Mar 04, 2008 Intended for VPX applications, MULTIGIG RT Connector Modules support data rates of 10+ Gb/s. Allowing 3U and 6U configurations, VPX maximizes I/O, offering density of 113 contacts per inch. In 6U system, connectors provide up to 160 high-speed differential pairs, each running at 6.25 Gb/s. Optical modules accommodate optical interconnection schemes used in military and aerospace applications, including Expanded Beam, LuxCis optical termini, and MT ferrules.