GAOTEK Inc
Toronto   Canada
Sep 10, 2008 Combining optical power tester and optical signal receiver, model GAO 2110 optical electric measure meter can scan all channels and internally store signal levels. It measures TILT, C/N, trunk voltage, and spectrum, and comes with rechargeable lithium battery. Unit features 1,310 or 1,550 nm optical power meter measurement for double wave-length, RF input and capability of TV picture showing, reverse transmission signal measurement, analog channel analysis capability, and 5 in. TFT.

EXFO
Quebec G1M 2K2  Canada
Aug 19, 2008 Supporting ADSL, ADSL2, ADSL2+, and VDSL2, AXS-200/630 VDSL2 Triple-Play Test Set aids in installation and troubleshooting of VDSL2 network deployments and 10/100 Mbit/s Ethernet-based triple-play services. It leverages customer premises equipment multimode VDSL2 chipset, featuring Broadcom® PhyR(TM) retransmission technology, and is designed for assessing QoS of VoIP and IPTV services. Combination of DSL and Ethernet interfaces enable testing in any residential triple-play environment.

Agilent Technologies, Inc
Santa Clara, CA 95051
Aug 19, 2008 Available with single or dual wavelength options at 1,310 or 1,550 nm, Agilent N4374B lightwave component analyzer (LCA) offers accurate and traceable electro-optical S-parameter for transmitter and receiver test. Along with integrated optical average power meter, it features accurate responsivity test with less than 0.8 dB uncertainty, specified absolute accuracy of absolute responsivity, and 75 W support with minimum loss pad for CATV applications.

GAO FiberOptics Inc.
Toronto   Canada
Aug 19, 2008 Featuring high contrast LCD display, GAO6413 optical time domain reflectometer measures unit/connection/transmission loss and accurately locates faults or breaks in optical fibers. Compact, lightweight device features Bellcore GR196 file format compliant read/write file, and can measure event dead zone within 1.6 m. Battery-powered fiber test instrument also comes with USB interface, serial port, and parallel interface to transfer data into PCs and notebooks.

Timbercon, Inc.
Lake Oswego, OR 97035
Aug 18, 2008 Featuring transmit, receive, computer interface, reference clock, and power supply ports, XFP Host Test Board enables programming and testing of XFP Electric Loopbacks and XFP transceivers prior to incorporation into equipment. Users can also analyze design changes or system modifications made to existing equipment. Electrically transparent board uses Rogers 3003 PC board material and single-ended micro-strip transmission lines.

Corning Cable Systems
Hickory, NC 28603-0489
Jul 31, 2008 Used in LAN applications, OTS-600 Series is comprised of optical sources, meters, testers, and kits with 10,000-result data storage capabilities. Models OT-600 and OS-400 come with USB data transfer interface, video inspection probe port, and 650 nm visual fault locator for optical network troubleshooting. Color LCD screen, soft-key menus, and testing wizard facilitate use, and OTS-View software is included for creating, saving, uploading, managing, and printing certification reports.

JDSU
San Jose, CA 95131
Jul 21, 2008 Suited for FTTx, LAN/WAN, and data centers found in cable and telecommunications networks, Fiber Optic Tests Kits provide tools necessary to inspect, clean, and perform power or attenuation measurements on fiber optic connections to avoid network damage during installation, qualification, and troubleshooting. Components include video fiber microscopes, optical cleaning tools, PocketClass(TM) or SMART optical light sources, optical power meters, and visual fault locator.

Ideal Industries, Inc.
Sycamore, IL 60178
Jul 11, 2008 IDEAL FiberMASTER offers portable, all-in-one solution to measure critical power and optical signal loss on standard wavelength windows, as well as on FTTx applications. It features 5-wavelength power meter with calibration function that stores reference power levels for dB loss measurements. When joined with 850 nm docking light source, power meter measures fiber optic power in mW and dBm, as well as fiber signal loss (dB) at 850, 1,300, 1,310, 1,490, and 1,550 nm wavelengths.

JDSU
San Jose, CA 95131
Jul 03, 2008 Optimized for development and manufacturing of optical transmission network elements, MAP-200 provides fiber optic power measurement and signal management tools. It offers compliance with LAN eXtensions for Instruments standards, user-friendly controls, and multi-language GUI. Mainframe comes in 3-slot configuration as well as 19 in. rack, 8-slot configuration with either front- or rear-facing orientation for optimal fiber routing.

Gao tek Inc.
Toronto M1B 2K4  Canada
Jul 01, 2008 Designed for testing at 1,310 and 1,550 nm wavelengths, Model GAO802 offers precise measurement of optical return loss, automatic wavelength identification functions, and absolute power testing. Used in fiber installation and maintenance applications, it helps users test connectors and components, find faults, and check fiber quality. Compact unit includes dual wavelength laser source and high contrast backlit display.

EXFO
Quebec G1M 2K2  Canada
Jun 27, 2008 By integrating software suite, FTB-8510B/FTB-8510G and IQS-8510B/IQS-8510G Packet Blazer GigE and 10 GigE test modules now support Provider Backbone Bridge-Traffic Engineering and Internet Protocol/Multi-Protocol Label Switching functionalities. Support is also included for multi-stream traffic filtering techniques, 1X and 2X Fibre Channel testing, full-line rate TCP throughput testing, and bi-directional RFC 2544 measurements.

GAO FiberOptics Inc.
Toronto   Canada
Jun 16, 2008 Suited for fiber optic network maintenance, equipment research and development, GAO800 Optical Power Meter can test optical fiber power loss, continuity, and evaluate line transmission quality. It features storage and page up/down functions, adapters supporting FC, ST, and SC ports, 100 groups of memory and record management, auto shut off, and LCD with backlit display. Functions include relative power test in unit of dB, multi-wavelengths test, and absolute power test in units of dBm/µW.

GAO Embedded Inc.
Toronto 12345  Canada
May 02, 2008 Featuring laser exploration and processing technology, GAO800 can be used to identify fiber, test fiber loss, check fiber continuity, and evaluate transmission quality of fiber chain. Also used for linearity and non-linearity tests, tester has 850, 980, 1,310, and 1,550 nm wavelength calibration points as well as storage and page up/down functions for test figures. Additional functionality includes relative power, multiwavelength, and absolute power tests.

GAO Embedded Inc.
Toronto 12345  Canada
Apr 29, 2008 GAO802 Optical Loss Tester features dual-wavelength stable laser source and high-contrast backlit display. Compact device includes automatic power off after 6 min idle and performs auto wavelength identification and absolute power test. It offers working wavelengths of 1,310 and 1,550 nm, return loss of 0-50 dB with accuracy of ±1.5 dB, and optical power of +3 to -50 dBm with accuracy of ±5%. With working temperature of 0-40°C, unit is powered by NiMH chargeable battery.

JDS Uniphase Corp.
Milpitas, CA 95035
Apr 18, 2008 T-BERD®/MTS-6000A Multi-Services Application Module is compact 10 GbE multifunction tester for installation and maintenance of Carrier Ethernet and IP services. It includes 10 GbE, IP Video, TCP/UDP, FTP test, and support for Ethernet and SONET/SDH up to 10 GbE/10 G on same physical port. User interface helps technician set up and evaluate tests as well as troubleshoot problems, and device supports various field applications for servicing telecommunications systems.

Omega Engineering, Inc.
Stamford, CT 06907
Apr 03, 2008 Utilizing white light polarization interferometry technology, handheld Model FOH201 provides temperature, pressure, and strain measurements. It includes rugged casing and rubber boot, which provide protection against intensive handling and harsh environments. Compatible with all Omega® WLPI optic sensors, portable CE-compliant meter comes with standard ±5 V analog output and RS232 communication port for real-time data acquisition.

JDSU
San Jose, CA 95131
Feb 18, 2008 With 40G Transport Module, T-BERD/MTS-8000 addresses all fiber characterization, optical spectrum analysis, service verification, and troubleshooting needs, from 1.5M to 40G. Unit includes ITU-T and GR-253 compliant optics with optical power measurement and frequency offset adjustment and measurement, as well as multiple mappings to structure 40G pipe. It offers overhead generation and analysis, error and alarm generation and analysis, various timing modes, and Round Trip Delay measurements.

GAOTEK Inc
Toronto   Canada
Feb 06, 2008 Using laser exploration and processing technology, GAO800 tests can perform linearity and non-linearity tests for optical network maintenance, equipment research, and development. It features 850, 980, 1,310, and 1,550 nm wavelength calibration points as well as digital storage and page up/down functions for test figure. Solution can identify fiber, test fiber loss accurately, check fiber continuity, and evaluate transmission quality of fiber chain.

Fluke Networks
Camarillo, CA 93010
Jan 14, 2008 Kits allow installers to perform cleaning and loss testing as well as safe inspections. FiberInspector Mini and Cleaning Kit (FT525) includes FiberInspector Mini and assortment of fiber-optimized cleaning tools in rugged carrying case, while Multimode Fiber Verification Kit (FTK350) includes multimode optical loss test set, FiberInspector Mini, VisiFault(TM) fault locator and carrying case. Complete Fiber Verification Kit (FTK450) adds single mode optical loss test set to components of FTK350.

JDSU
San Jose, CA 95131
Dec 14, 2007 Available for T-BERD/MTS-6000 and T-BERD/MTS-8000 systems, Optical Dispersion Measurement Module offers chromatic dispersion, polarization mode dispersion, and Attenuation Profile test functions. With single plug-in module, technicians can validate fiber link's compatibility with high-speed CWDM/DWDM systems. Module provides CD acquisition time of 45-70 s, test capability through non-bi-directional line wavelength referencing, and zero-wavelength characterization on G652 fiber.