Optical Multiplexers & Demultiplexers

Communication Systems & Equipment, Optics & Photonics

SWDM Alliance Formed to Support Duplex Multimode Fiber for Enterprise and Data Center Applications at 40 and 100 Gbps

September 24, 2015

Organization to drive industry-wide adoption of Shortwave Wavelength Division Multiplexing (SWDM) technology, leveraging data center operators' investments in duplex multimode fiber infrastructure SUNNYVALE, CALIF. – Nine companies today announced the formation of an interest group to drive cost-effective utilization of duplex multimode fiber (MMF) infrastructure in cloud and... Read More

Communication Systems & Equipment, Optics & Photonics

Gould Fiber Optics: Expanding its Product Portfolio of Micro Optic Components to Now Offer Multimode Fiber WDM

February 6, 2014

Millersville, MD, USA — Gould Fiber Optics, a leading worldwide manufacturer and supplier of premium passive fiber optic components, planar components and integrated modules, is expanding its product portfolio. Gould is now offering a new line of Micro Optic based Multimode fiber WDM component for 1310/1550nm channels. The WDM's high channel isolation, low insertion loss and flat response over... Read More

Communication Systems & Equipment, Computer Hardware & Peripherals, Electronic Components & Devices, Optics & Photonics, Test & Measuring Instruments

Optical Networking Solution optimizes Ethernet service delivery.

June 19, 2013

By virtualizing underpinning technology and complexity of Layer 0, 1, and 2 infrastructure, Intuitive Packet Optical Networking™ solution accelerates time it takes to deploy Ethernet and wavelength services. Leveraging MPLS-TP technology, PKX-1640 Packet Networking Card consists of 20-port, 200 Gbps Carrier Ethernet switch that delivers Ethernet service aggregation and multiplexing, extensive OAM, rapid protection switching, and MEF-standardized CE 2.0 services. Read More

Electronic Components & Devices, Optics & Photonics, Test & Measuring Instruments

Huawei Unveils Ultra-High-Capacity 40T WDM Prototype

March 28, 2013

ANAHEIM, Calif., -- Huawei, a leading global information and communications technology (ICT) solutions provider, launched a 40T Wavelength Division Multiplexing (WDM) prototype at the OFC/NFOEC 2013 event in Anaheim, Calif. The prototype supports simultaneous 2Tbit/s transmission of 20 C-band optical channels, providing an industry-leading capacity of up to 40 Tbit/s per fiber. Now, up to 10... Read More

Communication Systems & Equipment, Computer Hardware & Peripherals, Optics & Photonics

AEPONYX Showcases Easiest and Most Future Proof WDM-PON Solution with 40 Channels on a Single Fiber at OFC/NFOEC 2013

March 19, 2013

BREA, Calif., MONTREAL and DAEJEON, South Korea - AEPONYX inc. will be showcasing at the OFC/NFOEC2013 Exposition in Anaheim on March 19-21, 2013 the industry's easiest and most future proof, long-reach, single fiber, 40 channels WDM-PON solution. AEPONYX has achieved another world first; a truly standalone single fiber WDM-PON Solution composed strictly of WDM-PON Passives and small form... Read More

Communication Systems & Equipment, Optics & Photonics

Phoenix Photonics to Unveil New SDM Components at OFC 2013

March 12, 2013

Phoenix Photonics, the UK-based optical fiber components specialist, will launch a new range of fiber spatial mode control components, complementing its polarization mode control range, later this month at OFC (19 - 21 March, Anaheim Convention Center, CA, Booth #1710). Phoenix will showcase mode converters for Few Moded Fibers and Photonic Lantern technology for SDM (Space Division... Read More

Communication Systems & Equipment, Computer Hardware & Peripherals, Optics & Photonics, Test & Measuring Instruments

Multiplexer Appliance supports OC-3 and STM-1 standards.

September 5, 2012

Providing up to 84 T1 spans or 63 E1 spans, Model STM1-Mux offers capacity to connect 2,016 simultaneous calls. Unit supports direct cable connection with A116 high density digital telephony board, eliminating cross-connect wiring for each group of 16 E1/T1 spans terminated in high-density deployments. Combined with other Sangoma solutions supporting SS7 and SIP signaling and multiple transmissions standards, STM1-Mux can form complete platform to support many business applications. Read More

Electronic Components & Devices, Optics & Photonics, Test & Measuring Instruments

DWDM Universal Starter Kit supports 10G and 100G clients.

April 5, 2012

Featuring 1RU form factor, 100G DWDM Universal Starter Kit will boost optical channel rates to 100G per lambda. Design supports 10G and 100G on client side; 100G optical transport systems are designed to deploy as requirement for higher bandwidth applications and to aggregate internal service elements within carrier networks. For WAN and backbone regional networks, spectral efficiency is important in system engineering design. Read More

Electronic Components & Devices, Optics & Photonics, Test & Measuring Instruments

Mux/Demux Chipset supports long haul optical transport.

December 27, 2011

Comprised of BCM8414 demultiplexer for receiving data and BCM84142 multiplexer for transmission, 40G PHY Chipset leverages CMOS technology for 40G optical transmission using DQPSK modulation. Product integrates more than 20 Gbps IOs, which promotes developing devices that will support 100G optical transmission. Chipset's 2 x 23 Gbps to SFI-5.1 demux provides 2 receivers for data recovery on I and Q channels, while fully integrated multiplexer and precoder accept SFI-5.1 data. Read More

Communication Systems & Equipment, Electronic Components & Devices, Optics & Photonics, Test & Measuring Instruments

Exar Demonstrates MXP2 OTN Muxponder Solution at Ethernet Expo Americas 2011

November 22, 2011

Industry's First Any Service, Any Port, Single-Chip Solution to Offer Latest OTN Features<4444>FREMONT, Calif., Nov. 3, 2011 - Exar Corporation (Nasdaq: EXAR) will demonstrate MXP2's any service, any port, single-chip OTN muxponder solution at the Ethernet Expo Americas Conference in New York City, booth #315. MXP2 provides a more efficient means of transporting a variety of traffic, including... Read More

Communication Systems & Equipment, Electronic Components & Devices, Optics & Photonics, Test & Measuring Instruments

OTN Muxponder enables development of any service-any port line cards.

July 25, 2011

Designed to help future-proof networks, Model MXP2(TM) ASSP is targeted at ROADM/DWDM and Edge Aggregation platforms in OTN transport applications. Device enables development of any service-any port line cards and consolidation of service specific muxponders into single universal design. Eight watt, 2 x 10G single chip solution includes G.709 features such as ODU0, ODUflex, and GMP, enabling services to be mapped to size appropriate OTN containers and multiplexed in single multiplexing stage. Read More

Communication Systems & Equipment, Optics & Photonics

Fiber Optic Multiplexers operate in UV region of spectrum.

March 21, 2011

Providing rapid switching between single UV spectrometer and up to 16 sampling points, FMX-200U Series is suited for pharmaceutical dissolution monitoring as well as analysis of aromatic compounds and other strongly absorbing chromophores. Multiplexers utilize pair of retro-reflecting switching prisms to switch both transmitted signal from spectrometer and signal returning to optical detector. Units can be controlled from remote computer via RS-232, RS-422, or RS-485 port. Read More

Communication Systems & Equipment, Optics & Photonics

Multichannel CWDM is optimized for stability, repeatability.

November 24, 2010

Eight-channel Coarse Wavelength Division Multiplexer features epoxy-free optical path, 20 nm channel spacing, and 300 mW power handling capabilities. Operating wavelength is 1,260-1,620 nm, with ±0.5 nm center wavelength accuracy. In addition to line monitoring, WDM networks, and CATV networks, intended applications include power distribution, FTTX, test equipment, and telecommunication systems. Capabilities specifically suit Metro Access and Metro Core/Regional network environments. Read More

Communication Systems & Equipment, Optics & Photonics, Test & Measuring Instruments

CWDM utilizes thin film coating technology.

June 25, 2010

Operating over wavelength of 1,510-1,610 nm with 20 nm channel spacing, Coarse Wavelength Division Multiplexer maximizes existing fiber optic infrastructure by transmitting multiple wavelength signals through same fiber optic cable. Unit enables dual fiber strand to support multiple network topologies and data rates. Encapsulated within non-flux metal bonding micro optic packaging, CWDM has epoxy-free optical path and offers stable performance in demanding environments. Read More

Communication Systems & Equipment, Computer Hardware & Peripherals, Optics & Photonics, Test & Measuring Instruments

Optical Communications Switch/Multiplexer suits extreme environments.

June 9, 2010

Able to operate as OC-48 SONET multiplexer and/or GbE switch, SEL ICON (Integrated Communications Optical Network) features precise time distribution accurate to 1 µs over WAN. It also offers real-time latency monitor for each channel and support for SONET, Ethernet, and DS0 interfaces such as C37.94 and EIA 232. Product can be managed from one or several locations and is available in 19 in., shelf-mount package and 8 in. DIN-rail or panel-mount package. Read More

Communication Systems & Equipment, Optics & Photonics, Test & Measuring Instruments

Multiplexers target high-density CCTV applications.

June 1, 2009

Available for use over multimode or single mode optical fiber, F32V8DT/R(M)(S)1 Series video/data multiplexer transmitters/receivers support 32 channels of video with 8 channels of bi-directional serial data. Units offer 10-bit RS250C Short-Haul Quality video performance and can transport video up to 20 km between locations. Series is suited for applications such as airports and parking garages, which require large number of CCTV cameras and may have remote control center. Read More

Communication Systems & Equipment, Electronic Components & Devices, Optics & Photonics, Test & Measuring Instruments

Muxponder maximizes bandwidth on existing infrastructure.

January 21, 2009

Part of OpVista CX8 Optical Networking System, CX-40G Muxponder delivers 40 Gbps transmission/wavelength across optical networks from metro to long-haul. It is based on Dense Multi-Carrier (DMC) technology and combines 4 x 10 Gbs service streams into single 50 GHz Dense Wavelength Division Multiplexing (DWDM) channel. System helps deliver multiple 10-Gbit/sec services and also eliminates issues of PMD and CD optical dispersion. Read More

Communication Systems & Equipment, Computer Hardware & Peripherals, Electronic Components & Devices, Optics & Photonics, Test & Measuring Instruments

Flexible Remote Node unifies access and backhaul networks.

October 9, 2008

Integrated into ADVA FSP 3000 WDM System, Flexible Remote Node enables communications providers to serve customers from unified access and backhaul network. When located at curb, FRN can be configured as passive network element with environmentally hardened WDM filters that allow point-to-multipoint WDM-PON structure. When located at street cabinet, FRN can include active equipment such as optical amplifiers and active Ethernet technology that enable reach extension and traffic aggregation. Read More

Computer Hardware & Peripherals, Electronic Components & Devices, Optics & Photonics, Test & Measuring Instruments

DWDM SFP Module features 5 Gbps transmission speed.

September 25, 2008

Enabling expansion of SFP-based board design performance, transceiver can deliver output power from +3 to +6 dBm, has channel spacing of 100 GHz, and offers full C and L band coverage. Optical engines consist of Bookham Avalanche Photodiode (APD) Receiver and buried-heterostructure directly modulated laser. Able to achieve uncompensated reach of 400 km at 2.5 Gbps, solution can operate in high-noise, amplified environments and multi-span links for metro networks. Read More

Communication Systems & Equipment, Electronic Components & Devices, Optics & Photonics, Test & Measuring Instruments

DWDM Network Platform is able to serve from metro to core.

July 2, 2008

With multi-service and multi-reach feature set, hiT 7300 supports all reaches and transmission speeds in metro, regional, long-haul, and ultra-long haul applications on single platform. Unit has transponder cards that support traditional SONET/SDH, Ethernet, and SAN services at different speeds. Including amplifier options and end-to-end management support for all equipment configurations, it is also available in flatpack form factor suitable as CPE for tight space requirements. Read More