|
|
Advertisement
|
|
Optics & Photonics ->
Optical Measuring Devices, Sensors & Tools ->
Lasers & Laser Accessories ->
Laser Accessories
Laser Accessories
(Showing headlines 1 - 18)
|
Steel Cube creates structures in laser-based applications.Newport Corp.
Irvine, CA 92606
Aug 07, 2008
Constructed of all-stainless steel, PS-Q Pedestal Post Cube lets researchers mount PS Series Pedestal and Extension posts at 90° angle and create stable, multidimensional structures. Cubes are stacked and aligned onto posts using PS-Q-A thread adaptor that fits into either of 2 counterbores on cube. Thread adaptor enables cube to be rotated to same orientation as any of cubes below it while also providing threaded hole on top of cube for further stacking of posts or other cubes.
|
Laser Combiner targets microscopy applications.Agilent Technologies, Inc
Santa Clara, CA 95051
Aug 04, 2008
Developed to work with laser-based tools in microscopy market, Multi-Wavelength Laser Combiner provides 19 wavelength options that can be used in 3- to 8-channel configurations. Combiner is based on complex monolithic optic design, which incorporates many individual optical components into one monolithic structure. Since optics are bonded into pre-aligned structure, they do not drift out of alignment due to vibration or fluctuations in ambient temperature.
|
 Chillers provide up to 2,900 W/9.889 Btu/hr of heat removal.PolyScience Div. Of Preston Industries Inc.
Niles, IL 60714 4588
Jul 15, 2008
Designed for laser etching, engraving, and marking systems , PolyScience 5000 and 6000 Series recirculating chillers maintain process temperatures from -10 to up to +70°C with ±0.1°C stability. Available with ¼ to 1 hp compressors, they feature temperature and pressure/flow rate digital readouts, one-touch temperature control, ambient temperature tracking, and integral temperature, pressure, and flow alarms. Units can be equipped with centrifugal, positive displacement, or turbine pumps.
|
Accessory Kit facilitates femtosecond laser experiments.Impulse Optics
Encinitas, CA 92024
Dec 19, 2006
Designed to help set up and execute laser experiments using Ti:sapphire femtosecond oscillator, Laser Accessory Kit bundles laser optics and opto-mechanical components together in one box. Optical components offer optimal performance over spectral range of 700-950 nm. Included photo detectors allow detection of oscillator pulse train, while filters and beam splitters remove stray green pump laser light and cut down residual IR light for second harmonic experiments.
|
 Laser Beam Combiner targets biomedical applications.Point Source
Southampton SO31 4RF United Kingdom
Sep 28, 2006
Designed for singlemode fiber beam delivery, fiber beam combiner uses infused fiber technology as an integrated laser beam delivery system and beam combiner for blue solid-state lasers and red diode lasers. Singlemode fiber acts as spatial filter for higher order laser modes and produces TEM00 true Gaussian profile for combined and co-linear output beams.
|
 White Light Source is designed for ultrafast lasers.Del Mar Photonics, Inc.
San Diego, CA 92130
Jun 13, 2006
Self-contained and ready for use with amplified Ti:sapphire lasers, Jibe White Light Continuum Generator (WLCG) provides broad spectrum for applications where materials' characterization can be improved according to how samples interact with range of colors. Pumped with 0.3 mJ, 100 fs pulses, at 1 kHz repetition rate, Jibe WLCG generates 10 µJ of white light continuum. Spectral coverage is 450-900 nm with sapphire plate and 350-750 nm with CaF2 plate.
|
 Cube Beamsplitters suit 532 or 1064 nm Nd:YAG lasers.Edmund Optics
Barrington, NJ 08007
May 09, 2006
TECH SPEC(TM) High-Energy Polarizing Cube Beamsplitters handle laser-power densities up to 5 J/cm² and use multilayer dielectric film technology to minimize reflection and absorption losses. Units offer extinction ratio of > 500:1. Precision fused silica substrate and optical contact bonding prevents need for adhesive between prisms and improves parallelism of incoming and exiting beams. V-coat AR coating at design wavelength eliminates energy loss.
|
 Laser Adapter converts spot into line.BEA Lasers
Elk Grove Village, IL 60007
Apr 07, 2005 Intended for Series 150 and 206 laser diode modules, Model LO-X facilitates edge detection, straight edge determination, and almost any alignment application. Line adapter is offered in 4, 45, 60, and 90° configurations. When paired with Model 150 laser diode module, combined units have focus range from 60 mm to infinity. Housed in anodized aluminum, adapter measures 9 x 16.5 mm dia and laser diode measures 40 x 11.5 mm dia. Operating voltage is 4.5–9.0 V. |
 Lasers and Power Source suit welding applications.PRC LASER
Landing, NJ 07850
Sep 29, 2004 Low-powered XL 1000 and 1500 W lasers are designed for thin metal and non-metal processing markets. STS 5000 Power Source offers long term power stability and performance in cutting applications and laser welding. |
 Laser Regulator maintains beam-mode quality.CONCOA
Virginia Beach, VA 23454
Sep 22, 2004 Incorporating M2 technology, Series 601 eliminates atmospheric contamination during resonator gas cylinder exchange. Smooth flow paths do away with dead space as potential entrapment sites for moisture or hydrocarbons, facilitating stable emission. With operating temperature of -40 to 140°F, series offers PTFE seat for 3,000 psig or Kel-F® seat for 4,500 psig. Stable flow and pressure control is maintained via 2 stages of regulation. |
 Laser Module Mounting Brackets facilitate positioning.BEA Lasers
Elk Grove Village, IL 60007
Jun 16, 2004 Series LB allows air convection cooling and avoids short circuits from common positive case grounding of laser diode modules. Constructed of non-conductive Delrin plastic, brackets feature 360° rotation around orthogonal axes, with right and left translation adjustable along ¼ x ¾ in. mounting slots. Available in widths of 25, 16, 12.7, 12, and 10.5 mm, brackets mount to post furnished on 1½ x 1 x ½ in. non-conductive base for attachment to breadboards or optical tables. |
 Beam Homogenizer heightens UV laser efficiency.JPSA Laser
Hollis, NH 03049
Aug 12, 2003 Fly’s Eye Beam Homogenizer converts non-uniform beam of UV Excimer laser into homogeneous beam with 95% uniformity. Utilizing more than 80% of laser power, single element array adapts to most excimer lasers and offers working distances of 1–2 m with beam sizes of 8 mm to 1.5 cm. Product enables maximum amount of available laser power to be used, resulting in uniform, large area beam that can be subdivided using near-field imaging. |
 Laser Power Module suits amplifier and pump-laser testing.ILX Lightwave Corp.
Bozeman, MT 59771 6310
Mar 05, 2003 Suited for use with LDC-3926 16-Channel High Power Controller, 42 W Model LDC-3926339 Laser Diode Current Source Module is for development and production testing of EDFA and Raman amplifiers and high-power pump lasers. Module provides power output of up to 6 A at 7 V, constant current/power control, external modulation, and 4-wire forward voltage measurement. Laser diode protection features such as adjustable compliance voltage and hardware current limits are also included. |
 Laser Attachment suits alignment applications.Pinpoint Laser Systems
Peabody, MA 01960
Aug 13, 2002
90-Line takes laser reference beam from Laser Microgage and turns it exactly 90 deg for squaring machinery, checking shaft alignment, and adjusting machine tools. It is machined from solid aluminum and covered with anodized coating. Exiting laser is square to incoming beam within 0.0006 deg or equivalent to 0.001 in. over distance of 8 ft. 90-Line can also create parallel lines for checking roller alignment, shafts, tracks, and mechanical guides.
|
 Cooling Systems provide up to 2100 W of cooling capacity.Lytron, Inc.
Woburn, MA 01801 1039
Apr 29, 2002 Five 19 in. rack-mountable cooling systems are available with copper, stainless steel, and aluminum heat exchangers. Systems are compatible with variety of cooling fluids, such as water, deionized water, EGW, and oil. Capacities include 500, 1300, 2100 W. Systems are suitable for cooling lasers, semiconductor capital equipment, analytical instruments, and medical equipment.
|
 Collimators generate clean gaussian beams.Micro Laser Systems
Garden Grove, CA 92841
Dec 11, 2001 FC Series for singlemode fiber applications is available with 1.6 to 20mm beam sizes. It produces gaussian beam profile that is visible to 1600nm. Output is adjustable to vary beam for best collimation at operating wavelength. 1.6mm collimators are suitable for instrumentation and distances less than 10 meters. For larger distances, such as in free space communications, use 5, 10 or 20mm aperture collimators. All have stainless steel housing.
|
 Fiber Cable Assemblies terminate with FC/UPC connectors.Micro Laser Systems
Garden Grove, CA 92841
Dec 11, 2001 Singlemode fiber cable assemblies are available at wavelengths from 400 to 1550nm. Standard cable has 3mm jacket at wavelengths from 400 to 850nm and 1 meter length. At 1300-1550nm, it comes with FC/UPC, FC/APC, or LC connectors and polarization preserving fiber. Options include various lengths and 900 micron jacket fiber. All connections are of very high quality with no nicks, scratches, protrusions or undercuts. |
 Laser Lenses fit most laser cutting systems.Mate Precision Tooling
Anoka, MN 55303
Nov 29, 2001 Black Magic laser lenses have radioactive-free coating that provides ease of cleaning and resistance to scratching. Made from ZnSe, lenses have absorption of less than 0.15%, bulk absorption of less than 0.0005 cm-1 at 10.6m, and surface quality of 20-10 scratch. Thickness tolerance is rated at +0.1 mm., diameter tolerance is +0.0., and edge thickness variation is 0.025mm. Lenses have 90% clear aperture and reflection of 0.25%.
|
(Showing headlines 1 - 18)
|
|
|