Pinpoint Laser Systems
Peabody, MA 01960
Oct 06, 2006 Combining compact laser transmitter with receiver and digital display, 2-axis Microgage 2D is suited for precision measuring, machine alignment, calibration, and other industrial applications. Laser moves across receiver in vertical or horizontal direction providing reading of motion to 0.0001 in. over distances of 100 ft. It connects to PC or laptop for plotting and analyzing data for maintenance records and customer compliance.

Pinpoint Laser Systems
Peabody, MA 01960
Aug 24, 2006 Machined from solid aluminum block, 90-Line takes reference beam from Microgage 2000 and turns it 90°. Exiting laser is square to incoming beam within 0.0006°, or equivalent to 0.001 in. over distance of 8 ft. Housing has several adjustments, allowing square exiting beam to rotate through full plane. Bender can be used to set and adjust parallel tracks and rails; align web rollers, idlers and reels; check gantry travel and position; and monitor and adjust machine tools.

Pinpoint Laser Systems
Peabody, MA 01960
May 18, 2006 Microgage Laser Alignment System consists of compact laser transmitter that forms straight 150 ft reference line for checking machinery straightness, runout, and other parameters. Digital reader picks up laser beam and handheld display shows position of reader to within 0.0001 in. Rotating base swings laser in full circle, defining plane for checking flatness of equipment, while right-angle attachment redirects beam for checking squareness.

Pinpoint Laser Systems
Peabody, MA 01960
Mar 07, 2006 Microgage Complete Alignment Kit provides precise measurements of machinery straightness, parallelism, surface flatness, and squareness as well as bore and shaft alignment. It includes laser transmitter and digital receiver connected to handheld LCD display, which presents alignment units in 0.001 or 0.0001 in. increments or in millimeters. Kit also includes rotating base for setting and checking flat planes, 90° beam bender, and tripod.

Pinpoint Laser Systems
Peabody, MA 01960
Nov 30, 2005 Able to measure machinery rail straightness, parallelism, surface flatness, and other alignments, Microgage Universal Alignment Kit includes laser transmitter and digital receiver connected to handheld display. Readings appear on LCD, and alignment units are presented in 0.001 or 0.0001 in. increments or in millimeters. Other components include rotating base, 90° beam bender, and heavy-duty tripod.

Pinpoint Laser Systems
Peabody, MA 01960
Mar 30, 2005 Portable Microgage Bore Alignment Kit consists of 2.250 in. or 1.000 in. dia cylindrical laser, tool holder, chuck, or shaft mount. Readings as small as 0.0001 in. define bore or shaft's alignment are transmitted to handheld display for guiding user to what changes are needed for optimal performance. Measurements can be made over 80 ft range, and computer interface stores readings and connects unit to common programs and spreadsheets.

Pinpoint Laser Systems
Peabody, MA 01960
Oct 11, 2004 Consisting of laser transmitter and digital receiver that is connected to handheld display, Microgage Universal Alignment Kit provides measurements of machinery rail straightness, parallelism, and surface flatness. Readings appear on LCD display and alignment units are presented in 0.001 or 0.0001 in. increments or in millimeters. Rotating base is included for checking flat planes. Interface cable allows readings to be uploaded to laptop or PC for analysis.

VibrAlign, Inc.
Richmond, VA 23236
Sep 30, 2004 Shaft Hog, suitable for measurement and alignment of coupled rotating machines, delivers live readings from dual-laser detectors. System features laser line to facilitate setup and alignment and graduated labels on laser heads to help operator visualize misalignment condition. Visual cue reinforces digital values displayed on unit. Powered with 3 C cell batteries that provide 24 hr, continuous operation, ergonomic tool can be operated with one hand.

Pinpoint Laser Systems
Peabody, MA 01960
May 19, 2004 Microgage 2000 facilitates checking perpendicularity of cutting tools, squareness of machine assemblies, and straightness and run out of stage and slide travel. Kit consists of laser transmitter that projects working beam up to 80 ft away, digital display, and receiver that catches laser beam and provides readout for each alignment task. Laser and display operate on batteries, and computer interface allows readings to be analyzed, plotted, and stored.

Pinpoint Laser Systems
Peabody, MA 01960
Apr 22, 2004 Microgage Flatness Checking Kit monitors flat moving surfaces, precision machine slides, X-Y stage travel, and robot positioning accuracy. Laser transmitter is mounted on precision base that can swing laser reference beam through flat plane. Digital receiver is placed on surface to be measured, and hand-held display provides reading of height of surface relative to laser beam to 0.0001 in. It can be used over ranges of 1-85 ft and has precision machinist's level.

Pinpoint Laser Systems
Peabody, MA 01960
Mar 23, 2004 Angular Measuring and Alignment Kit can measure and check angles with sensitivity of 1 arc-sec over surfaces that are up to 20 ft long. Microgage 2000 laser transmitter projects collimated laser reference beam that is captured, upon transmission through Angle Measuring Prism, by receiver that is connected to digital display. As beam moves along receiver, digital readout displays measurements necessary for checking angular alignment.

Ludeca Inc.
Miami, FL 33172
Mar 12, 2004 RollAlignâ„¢ visual laser tool facilitates field replacement of process rolls. Laser emitter unit, mounted on reference roll, projects two Class 2 fanned 635 nm laser lines onto reflector unit mounted on roll to be moved. This allows operator to view vertical angle (pitch) and horizontal angle (parallelity) as roll is adjusted into alignment. Product fits rolls of any diameter spaced between ½ in. to 10 ft apart. Crowned rolls can also be measured and aligned.

Pinpoint Laser Systems
Peabody, MA 01960
Mar 04, 2004 Microgage Spindle and Shaft Alignment Kit consists of laser that is mounted to drive shaft, spindle, or gearbox flange, which projects precise reference beam along centerline. Digital target receiver catches laser beam and provides measurement reading to show if receiver is off-center. System measures misalignments as small as 0.0001 in. Angular errors can also be measured and eliminated. System can be attached to laptop or PC for printouts and record keeping.

Pinpoint Laser Systems
Peabody, MA 01960
Jan 16, 2004 System utilizes digital Microgage receivers that connect directly to Microgage 2000 Display and can be used up to 80 ft from laser source with 0.0001 in. accuracy. Operator can change measuring units and adjust functions, and MG-2000 connects to laptop for recording readings, analysis, and generating reports. Microgage 2000 works with laser transmitter that projects collimated laser reference beam that is captured by receiver connected to digital display.

Pinpoint Laser Systems
Peabody, MA 01960
Nov 19, 2003 Machined to dimensional specifications of optical telescopes, battery-operated, 2.25 in. Microgage Laser System fits into standard optical hardware mounts. Laser beam is projected on exact centerline for optical mount, while Microgage digital receiver tracks position of laser beam with electronic detector. Display provides quantitative reading of measurement and offers various user functions. Measurements with sensitivity of 0.0001 in. can be made over distances of 12 in. to 80 ft.

Millmate
Harahan, LA 70123-4132
Aug 06, 2003 Equipped with No. 2 Morse taper, Tap Aligning Center has spring center used to align taps when hand tapping in lathes or drilling machines. Suited for awkward tapping operations, product does not require user to constantly adjust center. Physical characteristics include hardened 5/16 in. dia center, 1 in. plunger travel, and overall length of approximately 5½ in.

Pinpoint Laser Systems
Peabody, MA 01960
Aug 06, 2003 Dual-Axis Microgage 2D can measure horizontally and vertically at same time. It provides straightness, flatness, parallelism, and squareness measurements to 0.001 in. over distances of 50 ft. System will monitor mechanical misalignment and runout, align rails and slides, position machinery sub-assemblies, and align bores and drive shaft mechanisms. It can be attached to PC or laptop for collecting, analyzing, and storing machinery alignment information.

Hamar Laser Instruments, Inc.
Danbury, CT 06810
May 06, 2003 Series L-740 Ultra-Precision Systems are machine tool grade, while Series L-730 Precision Systems are suitable for fabrication. With ability to use multi-targets simultaneously, lasers can collect complete geometric data on most machining centers in 90 min. Series L-740 lasers offer flatness capability of 0.00001 in./ft and 200 ft operational range. Series L-730 lasers have continuously sweeping laser planes accurate to 0.00012 in./ft and include built-in, back-lit level vials.

Pinpoint Laser Systems
Peabody, MA 01960
Mar 12, 2003 Microgage 2000 provides 0.0001 in. precision over working distance of 80 ft. Display unit offers selection options for English and metric units, data averaging, offsets, and is computer compatible for downloading and analyzing data. Laser housing has 15 arc-sec leveling vial built in for precision equipment leveling and positioning. Microgage 2000 is suitable for equipment and machinery that needs to be straight, flat, square, parallel, or level.

Ludeca Inc.
Miami, FL 33172
Mar 10, 2003 Compact smartALIGN® simplifies laser shaft/coupling alignment by utilizing smart navigation with joystick and 2 keys. On-screen help text guides operator to results for best corrective shimming and horizontal moves. Design incorporates rechargeable battery and backlit display. Alignment readings are given in 3 steps: Dimension, Measure, and Result. Unit provides graphic display of machine centerlines in addition to foot and coupling values.